基于CAN总线的核医疗设备测控系统设计

介绍了以DSPIC30F6014单片机为核心控制器进行信号检测,并通过执行机构对设备实现控制.系统采用PC总线方式连接新型的CMOS集成温湿度传感器,同时控制CAN总线控制器和总线收发器MCP2551构成的总线通信系统进行数据传输,通过PCI-CAN适配卡将上位机与控制网络连接起来,完成核医疗设备的分布式测控系统设计.详细介绍了系统构成、部分软硬件设计方法等.     

GCr15轴承钢冶炼过程钢液洁净度变化

 研究了EAF→LF→VD→软搅→CC工艺生产GCr15轴承钢冶炼过程钢中T[O]及非金属夹杂物的变化情况。通过将电炉出钢碳质量分数控制为0.2%～0.4%、出钢加铝强脱氧及造预精炼渣、LF精炼过程造高碱度强还原性炉渣、VD真空强搅拌及防止中间包二次氧化,可以生产[w(T[O])]等于8×10－6的轴承钢。在炉外精炼过程中夹杂物经历了Al2O3→MgO·Al2O3→CaO-MgO-Al2O3演变。LF精炼过程夹杂物平均尺寸减小,经过VD真空处理后尺寸增加,接着在软搅和中间包过程继续减小。利用VD真空处理可以去除高达74%的夹杂物。     

GCr15钢奥氏体晶粒长大规律研究

利用Gleeble-3800型热模拟试验机研究不同加热温度和保温时间下GCr15钢的奥氏体晶粒长大规律.结果表明,奥氏体晶粒随加热温度的升高呈指数关系长大,随保温时间的延长近似呈抛物线关系长大,同时晶粒平均直径与保温时间的关系符合Beck方程,温度越高,晶粒生长指数越大.在已有模型的基础上.通过对试验数据进行非线性回归得到了描述GCr15钢奥氏体晶粒长大规律的数学模型.     

离子束抛光对零件精度的改善研究

利用等离子体源离子注入(Plasma Source Ion Implantation简称PSII)原理,来进行轴类零件的抛光试验研究.被抛光轴选用的材料为GCr15.试验结果表明:该方法可以在一定程度上提高轴表面的圆度和表面粗糙度,但是对轴圆柱度的改善不明显.     

Development of Anti-LRRC15 Small Fragments for Imaging Purposes Using a Phage-Display ScFv Approach

The human leucine-rich repeat-containing protein 15 (LRRC15) is a membrane protein identified as a marker of CAF (cancer-associated fibroblast) cells whose overexpression is positively correlated with cancer grade and outcome. Nuclear molecular imaging (i.e., SPECT and PET) to track LRRC15 expression could be very useful in guiding further therapeutic strategies. In this study, we developed an ScFv mouse phage-display library to obtain small fragment antibodies against human LRRC15 for molecular imaging purposes. Mice were immunized with recombinant human LRRC15 (hLRRC15), and lymph node cells were harvested for ScFv (single-chain variable fragment) phage-display analysis. The built library was used for panning on cell lines with constitutive or induced expression after transfection. The choice of best candidates was performed by screening various other cell lines, using flow cytometry. The selected candidates were reformatted into Cys-ScFv or Cys-diabody by addition of cysteine, and cloned in mammalian expression vectors to obtain batches of small fragments that were further used in site-specific radiolabeling tests. The obtained library was 1.2 × 10⁷ cfu/µg with an insertion rate >95%. The two panning rounds performed on cells permittedenrichment of 2 × 10⁻³. Screening with flow cytometry allowed us to identify 28 specific hLRRC15 candidates. Among these, two also recognized murine LRCC15 and were reformatted into Cys-ScFv and Cys-diabody. They were expressed transiently in a mammalian system to obtain 1.0 to 4.5 mg of Cys fragments ready for bioconjugation and radiolabeling. Thus, in this paper, we demonstrate the relevance of the phage-display ScFv library approach for the fast-track development of small antibodies for imaging and/or immunotherapy purposes.     

基于电容阵列I-V测试仪的光伏STC曲线拟合研究

现有的光伏组件在标准条件(STC)下I-V曲线的拟合算法存在计算过于复杂或准确度不足的问题。为提高曲线在偏离STC环境下的拟合准度,提出了一种依据太阳电池四参数结构,通过选取曲线最大功率点(MPP)附近6个点作为拟合点,计算组件I-V数学模型从而实现曲线拟合的拟合算法。不同光伏组件的最优拟合点间隔不同,为提高拟合精度,进一步提出了自适应拟合点选取方法,同时设计了以电容阵列为负载的I-V测试仪结构并研制了一套完整仪器。该测试仪可通过增加MPP附近数据点的密度,提升拟合点的选取精度。经过MATLAB仿真与实际验证表明,模型拟合算法的拟合结果在各种测试环境下的准确度均高于多项式拟合算法;所设计的I-V测试仪性能优越,适用于工程测量之中。     

一种人体互动无线系统的设计

提出了一种无线人体互动控制系统的软硬件实现方法.该系统硬件部分包括人体红外传感器,无线射频模块,作为处理器的单片机,逻辑控制门等.该系统可作为互动控制的前端部分适用于需要检测人体是否存在的自动控制场合中.     

GCr15钢制钉模复合强韧化工艺研究

通过失效分析和脆断机理研究，对制钉模的失效原因进行了深入分析，在此基础上对复合处理工艺进行了改进；改进后复合处理的G015钢制钉模具有较高的强度和韧性，基本上避免了早期脆性断裂。     

基于单片机控制的时钟芯片SD2203AP的应用设计

时钟芯片SD2203AP具有内置晶振、两线式I^C总线通讯方式、高精度免调校,且与MCU的通讯接口电路简单,内部时钟精度高且功耗低的特点。文中详细介绍该模块的工作原理、应用举例（单片机STC89C54控制SD2203AP的硬件接口电路设计和软件编程方法）及应用中的一些注意事项。