Cure kinetics and mechanical properties of the blend system of epoxy/diaminodiphenyl sulfone and amine terminated polyetherimide-carboxyl terminated poly(butadiene-co-acrylonitrile) block copolymer

The cure kinetics of blends of epoxy resin (4,4’-tetraglycidyl diaminodiphenyl methane; TGDDM)/curing agent (diaminodiphenyl sulfone; DDS) with ATPEI (amine terminated poly-etherimide) -CTBN (carboxyl terminated poly (butadiene-co-acrylonitrile)) block copolymer (AB type) were studied using differential scanning calorimetry under isothermal conditions to determine the reaction kinetic parameters such as activation energy and reaction constants. Final cure conversion decreased with increasing amount of AB in the blends. A diffusion controlled reaction was observed as the cure conversion increased, and the curing reaction was successfully analyzed by incorporating the diffusion control term in the rate equation for the epoxy/DDS/AB blends. The fracture toughness was improved to about 350% compared to that of the unmodified resin at 30% of AB block copolymer. This is attributed to the formation of co-continuous morphology between the epoxy phase and AB block copolymer phase. By increasing the amount of AB, the modulus of the cured blends decreased, which was due to the presence of CTBN rubbery phases.     

Morphology and micromechanical behavior of binary blends comprising block copolymers having different architectures

Morphology and deformation behavior of binary blends comprising styrene/butadiene block copolymers (polystyrene content, Φ_PS∼0.70) having different molecular architectures were studied by means of transmission electron microscopy and tensile testing. In contrast to the binary diblock copolymer blends discussed in literature, the phase separation behavior of the blends investigated was found to be strongly affected by asymmetric molecular architecture. The blends showed macrophase separated grains, in which the structures resembled the microphase morphology of none of the blend components. Unlike the classical rubber-modified or particle-filled thermoplastics, neither debonding at the particle/matrix interface nor the particle cavitation was observed in these nanostructured blends. The microdeformation of the blends revealed plastic drawing of polystyrene lamellae or PS struts dispersed in rubbery matrix and orientation of the whole deformation structures along the strain direction.     

Poly(styrene-b-isobutylene-b-styrene) block copolymer ionomers (BCPI) and BCPI/silicate nanocomposites. 2. NaBCPI sol-gel polymerization templates

Polystyrene (PS) blocks in poly(styrene-b-isobutylene-b-styrene) (PS-PIB-PS) block copolymers were partially sulfonated and the acid groups converted to Na⁺SO₃⁻ groups to create ionomers. Then, dimethylacetamide was used to selectively swell the ionic PS domains and the swollen films were exposed to sol-gel reactive tetraethylorthosilicate solutions. (EtO)_4−xSi(OH)_x monomers then permeated films so that sol-gel reactions occurred within/around the ionic PS domains. Environmental scanning electron microscopy/energy dispersive X-ray spectroscopy investigations showed that silicate structures can be incorporated within the interior of the ionomer films. Differential scanning calorimetry studies indicated that there is no variance in the PIB block T_g with respect to ionomer formation, or with respect to silicate loading of the ionomer at low levels, which suggests that the silicate component does not reside in the PIB phase. ²³Na solid state NMR spectroscopy detected isolated Na⁺SO₃⁻ groups as well as aggregated SO₃⁻Na⁺ ion pairs for ‘as cast’ and ‘dry’ non-silicate containing ionomer samples. In a hydrated sample, almost all Na⁺ ions were solvent-separated. AFM analysis showed that phase separation exists, but that the degree of order is significantly less than that for hybrids based on the corresponding benzyltrimethylammonium ionomer. This frustrated morphology was also seen in the results of small angle X-ray scattering experiments. Given the scale of organic/inorganic heterogeneity, these hybrids are properly classified as nanocomposites.     

Influence of block lengths and symmetries of block copolymers on phase behavior of polymer A/polymer B/block copolymer ternary blends

Monte Carlo simulations were used to investigate the compatibilizing effects of diblock copolymers in A/B/A-B diblock copolymer ternary blends and triblock copolymers in A/B/triblock copolymer ternary blends, respectively. The volume fraction of homopolymer A was 19% and was the dispersed phase. The simulation results show that diblock copolymers with longer A-blocks are more efficient as compatibilizers, and symmetric triblock copolymers with a shorter middle block length are easily able to bridge each other through the association of the end blocks. This kind of triblock copolymers have relatively high ability to retard phase separation as compatibilizers.     

Numerical simulation of land subsidence and verification of its character for an iron mine using sublevel caving

Combined with a digital bored photography system and in-situ statistics concerning the joints and fissures of both ore-body and surrounding rock,a 2D discrete model was constructed using UDEC.The stress field and displacement field changes of different sublevel stoping systems were also studied.Changes in the overlying rock strata settlement pattern has been analyzed and validated by in-situ monitoring data.The results show that:in the caving process,there exists an obvious delay and jump for the overlying rock strata displacement over time,and a stable arch can be formed in the process of caving,which leads to hidden goafs.Disturbed by the mining activity,a stress increase occurred in both the hanging wall and the foot wall,demonstrating a hump-shaped distribution pattern.From the comparison between simulation results and in-situ monitoring results,land subsidence shows a slow-development,suddenfailure,slow-development cycle pattern,which leads eventually to a stable state.This pattern validates the existence of balanced arch and hidden goafs.     

深覆盖层河道闸坝电站防沙布置试验研究

某闸坝式水电站坝址覆盖层深厚,河道欠宽阔,发电引用流量比例较高,受调节库容限制,库区泥沙将很快输移到达坝前,引水防沙问题突出。本文对施工围堰作为其电站枢纽引水防沙体系的效果进行了水工模型试验研究和分析。对四种挡沙坎布置型式进行了对比试验研究。表明,利用原有挡水围堰,结合纵向挡沙坎与排沙底孔联合作用既有利于施工方便,拉沙效果又较好,可达到电站＂门前清＂,较好的解决了大流量闸坝式电站的引水与防沙之间的矛盾。本研究成果的成功实施可减少工程投资,缩短工期,尤其对于在低水头、大单宽的多沙河流上修建的闸坝工程具有较好的借鉴意义。     

Parallel block tridiagonalization of real symmetric matrices

Two parallel block tridiagonalization algorithms and implementations for dense real symmetric matrices are presented. Block tridiagonalization is a critical pre-processing step for the block tridiagonal divide-and-conquer algorithm for computing eigensystems and is useful for many algorithms desiring the efficiencies of block structure in matrices. For an “effectively” sparse matrix, which frequently results from applications with strong locality properties, a heuristic parallel algorithm is used to transform it into a block tridiagonal matrix such that the eigenvalue errors remain bounded by some prescribed accuracy tolerance. For a dense matrix without any usable structure, orthogonal transformations are used to reduce it to block tridiagonal form using mostly level 3 BLAS operations. Numerical experiments show that block tridiagonal structure obtained from this algorithm directly affects the computational complexity of the parallel block tridiagonal divide-and-conquer eigensolver. Reduction to block tridiagonal form provides significantly lower execution times, as well as memory traffic and communication cost, over the traditional reduction to tridiagonal form for eigensystem computations.     

机械臂视觉伺服系统中的高精度实时特征提取

以机械臂视觉伺服系统为背景,立体视觉所需要的特征点为目标,提出一种基于颜色块的实时特征提取方法．特征点的定位分为粗定位和精定位两个过程,粗定位用来跟踪目标颜色块,精定位在粗定位的基础上,切出小图像并提取目标轮廓,利用犓犔变换对轮廓点进行分类,并通过最小二乘法对边缘点进行拟合．根据直线方程计算顶点的亚像素精度坐标,为下一步的目标位姿测量提供基础．实验结果验证了该方法的有效性．     

Preparation and characterization of nanoporous polyimide films from triblock copolyimides

Nanoporous polyimide films were prepared from triblock copolyimides. A thermally labile polymer, poly(propylene glycol), was incorporated into polyimides based on 4,4-(hexafluoroisopropylidene)diphthalic anhydride to obtain triblock copolyimides. Nanofoams were formed by thermolysis of the labile block. The thermal properties of the copolymers were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The nanopores were characterized by scanning electron microscopy (SEM).