Ni-P-Ce合金体系复合刷镀层沉积行为研究

在Ni-P合金复合刷镀液中,添加稀土Ce3+,可以通过电刷镀沉积出Ni-P-Ce合金镀层,并可提高刷镀层的沉积速度和刷镀液稳定性;稀土化合物CeCl3·7H2O含量在35g/L左右时,刷镀的电流效率及沉积速度高;柠檬酸在Ni-P-Ce刷镀液中既可起稳定剂的作用,又可使Ce3+离子从溶液中电沉积出来。     

基于动态结构神经网络的自组织模糊控制

给出了一种利用动态结构的BP 神经网络进行模糊推理的方法,即在学习过程中BP网络的隐层层数和维数不断变化,其目的在于使网络性能在训练过程中始终保持最优,从而实现规则自组织,达到在控制过程中不断优化控制性能的目的.     

中频炉酸性炉衬使用寿命的探讨

通过对炉衬材料的选择,作用机理及影响石英砂炉衬材料寿命的相关因素的阐述,说明了SD-T-A石英砂干振料可提高中频炉酸性炉衬使用寿命的原因.     

合金元素对Fe_3Al和FeAl合金力学性能的影响SCIEI

本文研究了Mo,Si,B和化学计量成分对Fe_3Al和FeAl合金室温和高温拉伸性能以及组织结构的影响,结果表明,三种合金元素都使两种铁铝化物得到明显强化,但Mo和Si使其严重变脆,硼使FeAl增加塑性,断口由沿晶型变为穿晶准解理型。富Al的Fe_3Al和富Fe的FeAl合金室温塑性较化学计量化合物有明显提高。Fe_3Al从400—550℃,FeAl从400—500℃出现反常温度关系,用组织结构方面的结果对此进行了讨论。     

200MW汽轮机焊接隔板检查与加固技术

阐述了200MW汽轮机焊接隔板变形这一在国内电站中多次出现的问题,以及由于隔板变形而对机组带来的危害.强调了在隔板发生严重变形时对隔板进行焊接加固的必要性,概述了隔板检查方法,包括隔板表面缺陷、内部缺陷、通流间隙、挠曲变形等的检查,以及隔板加固的工艺要点.     

基于小波变换的超声信号自适应消噪方法研究

超声检测中，特定的缺陷回波信号一般都有一定的相关性，因而可利用自适应噪声抵消来增强缺陷回波信号。针对最小均方（LMS）算法自适应噪声抵消的缺点，提出了基于小波变换的自适应噪声抵消方法，通过Matlab软件将该算法应用于超声缺陷信号的仿真处理。结果表明，该算法大大提高了缺陷回波信号的信噪比，且具有较高的缺陷定位精度和纵向分辨率。     

Direct laser sintering of a copper-based alloy for creating three-dimensional metal parts

Direct laser sintering of metal, as one of the important developments in rapid prototyping technologies, is discussed in this paper. A special copper-based alloy is used for this rapid prototyping process. Experiments on the sintering conditions of this material had been conducted in a self-developed high temperature metal sintering machine. The mechanism of laser sintering for this kind of material was disclosed by SEM analysis of microstructures of sintered parts. The density, surface roughness and mechanical properties of the laser sintering parts due to variation of process parameters were measured and analysed. The effect of process parameters to the accuracy of sintered parts was also investigated. Thus, optimum parameters were obtained for direct laser sintering of three-dimensional metal parts.     

AlF3贮仓料位计在线监控系统开发与应用

针对铝电解原材料中AlF3与Al2O3自动配料不准和难于观察及控制的现象，我厂开发应用了AlF3贮仓料位计，并与微机网络相连，实现了远程测量与在线监控，使AlF3配料更准确更均匀，电解质分子比更稳定，电解槽生产低耗高效。     

Effects of CeF3 on properties of self-shielded flux cored wire

0 IntroductionSelf-shielded flux cored wire is a newly developedwelding material used without gas protection. Use of suchcored wires has grown rapidly in developed countriesbecause of the following advantages: simple use, goodwind resistance ability, lower cost resulted from highproductivity and strong desulfurization ability[1]. Self-shielded flux cored wires are preferred for on-site weldingsuch as ship and barge building, storage tank, bridge,offshore oil platform buildings and so on[2 -3].…     

Experiment and simulation study of 3D magnetic field sensing for magnetic flux leakage defect characterisation

Magnetic flux leakage (MFL) testing is widely used to detect and characterise defects in pipelines, rail tracks and other structures. The measurement of the two field components perpendicular to the test surface and parallel to the applied field in MFL systems is well established. However, it is rarely effective when the shapes of the specimens and defects with respect to the applied field are arbitrary. In order to overcome the pitfalls of traditional MFL measurement, measurement of the three-dimensional (3D) magnetic field is proposed. The study is undertaken using extensive finite element analysis (FEA) focussing on the 3D distribution of magnetic fields for defect characterisation and employing a high sensitivity 3-axis magnetic field sensor in experimental study. Several MFL tests were undertaken on steel samples, including a section of rail track. The experimental and FEA test results show that data from not only the x- and z-axes but also y-axis can give comprehensive positional information about defects in terms of shape and orientation, being especially advantageous where the defect is aligned close to parallel to the applied field. The work concludes that 3D magnetic field sensing could be used to improve the defect characterisation capabilities of existing MFL systems, especially where defects have irregular geometries.