AVS-M解码在Symbian平台上的实现

AVS-M是<先进音视频编码>系列标准AVS的第七部分,是无线网络与手机等移动设备视频编解码的规范和标准,高效快速的编解码器对AVS-M标准能否得到推广和应用有着极其重要的作用.介绍了AVS-M标准参考代码移植到Symbim平台的方法和要解决的问题,并针对Symbian手机平台对AVS-M标准参考代码给出几种优化方法,实现了AVS-M在NOKIA 6670上解码QCIF格式达到15帧/秒,基本上能够实现在Symbian平台的流畅播放,对推广AVS-M有很大的帮助.     

现代远程教育之网络技术研究与探讨

现代远程教育是近年来国际教育发展的重要趋势。介绍了我国现代远程教育状况,就现代远程教育的解决方案中的网络技术进行了深入地研究和讨论。     

Use of Graduate Study in Psychology as a data source.

Comments on an article by C. M. Stoup and L. T. Benjamin, Jr. (see record 1983-24200-001), in which they used various editions of Graduate Study in Psychology, published by the American Psychological Association (APA), to report the GPAs and Graduate Record Examination scores of master's and doctoral students across various areas of psychology. It is cautioned that the use of Graduate Study in Psychology as a data source calls for skepticism, as there is sufficient reason to question some of the data that are submitted to the APA by psychology departments. (3 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Numerical stability of symmetric solitary-wave-like waves of a two-layer fluid—Forced modified KdV equation

Forced internal waves at the interface of a two-layer incompressible fluid in a two-dimensional domain with rigid horizontal boundaries are studied. The lower boundary is assumed to have a small obstruction. We derive a time-dependent forced modified KdV equation when the KdV theory fails and study the stabilities of four types of symmetric time-independent solitary-wave-like solutions numerically.     

双腹板、顶底角钢半刚性连接节点的非线性有限元分析

用ANSYS有限元程序对双腹板、顶底角钢半刚性连接节点的非线性性能进行了理论分析,并将计算结果与试验结果进行了比较,两者吻合较好.通过对7个系列共23个双腹板、顶底角钢连接试件的有限元分析,重点探讨了连接的各类组件对节点力学性能的影响.结果表明:梁截面高度、顶底角钢厚度及与柱翼缘相连的顶底角钢螺栓间距对节点力学性能的影响较大;腹板角钢厚度对节点力学性能有一定的影响;柱腹板水平加劲肋、柱截面高度和螺栓直径对节点力学性能的影响较小.双腹板、顶底角钢连接梁柱节点属于典型的半刚性连接节点,建议在设计中考虑其对结构受力性能的影响.     

简易数字信号传输性能分析仪的设计

为了更好地分析数字信号在传输过程所受码间干扰和噪音等因素的影响．文中设计了一个以FPGA为核心的简易数字信号传输性能分析仪,完成了数字信号发生器、伪随机信号发生器（模拟噪音源）、低通滤波器、加法器、数字信号分析电路的设计．该系统利用FPGA产生数字信号序列（M序列和曼彻施特编码序列）和模拟噪声序列（伪随机信号）,经过由低通滤波器构成的模拟信道进行传输,再由FPGA对数字信号分析提取出同步信号,最后在示波器上以眼图的形式来分析信号的传输性能．对截止频率与通带增益、数据率误差和眼图进行了实测．结果表明误差值均在允许范围内,系统工作稳定,眼图清晰,达到了设计要求的各项指标．     

直方图的脑图像分割策略

为了提高核磁共振分割精度和效率,提出了一种基于直方图核磁共振脑图像分割算法.利用脑提取工具剔除脑核磁共振图像中非脑组织.根据灰度变化的特点,将脑图像直方图的区域峰值组成新的直方图,通过基于直方图阈值选取规则将脑组织分割成白质、灰质、脑脊液.实验结果表明:该算法相对于常见的分割算法,获得了较高的分割精度,同时运算效率高,运算时间降低了1~2个数量级.     

基于M2M的电梯安全运行监控系统设计

基于M2M技术提出一种电梯安全运行监控方案。通过对电梯轿厢安装多种类型的传感器,将分布在各处的电梯运行过程中出现的运行状态信息、故障信息通过电话通信网络或Internet网络及时传输到M2M业务监控平台,实现远程分析电梯故障功能,从而使电梯维护人员到达现场可以快速解决电梯故障。该系统可实现电梯监控实时化、智能化,试用效果良好。     

跳频通信技术研究与仿真

跳频技术具有较强的抗干扰、抗噪声,抗频率选择性衰减的能力和较低的误码率。通过建立跳频通信的仿真模型,实现跳频通信在噪声干扰下的性能分析,用Matlab/Simulink选取不同仿真参数来仿真,对比得出比较好的最佳仿真效果。通过分析跳频通信技术难点,给出相应的最佳方案。     

The effect of partial substitution of Ti with Zr, Cr or V in the Mg35Ti10Ni55 electrode alloy on its electrochemical performance

In this paper, Zr, Cr and V were selected as the partial substitution elements for Ti to form Mg₃₅Ti₅M₅Ni₅₅ quaternary alloys prepared by means of mechanical alloying on the basis of the ternary Mg₃₅Ti₁₀Ni₅₅ electrode alloy previously studied by the authors. It is found that all the three quaternary alloys possess an amorphous main phase and exhibit improved cycling stability than the original ternary Mg₃₅Ti₁₀Ni₅₅. The Zr-substituted alloy has also a higher discharge capacity. X-ray photoelectron spectroscopy (XPS) surface analysis reveals that on the surface of each alloy a multi-component oxide composite film is formed, which is more compact and corrosion resistant than the Mg(OH)₂ film and the (TiO₂)_x(NiO)_y(Mg(OH)₂)_z composite films reported previously. Auger electron spectroscopy (AES) analysis shows that the substituting elements tend to reduce the thickness of the passivation films. The thickness of composite oxide film on the alloys is in the following order: Mg₃₅Ti₁₀Ni₅₅>Mg₃₅Ti₅V₅Ni₅₅>Mg₃₅Ti₅Zr₅Ni₅₅>Mg₃₅Ti₅Cr₅Ni₅₅. The result agrees well with that of the polarization resistances (R_P) values obtained from the electrochemical impedance spectroscopy (EIS) Nyquist diagrams. It demonstrates that the thicker the passivation film is, the higher the R_P is and the more difficultly the charge transfer reaction proceeds. Anodic polarization curves indicate that the addition of Cr and Zr decreases effectively the corrosion current. However, the corrosion of the electrode alloys in the electrolyte is still high and proceeds constantly as the corrosion current remains almost constant during further cycles.