蠕墨铸铁在铁道车辆制动系统中的应用研究

在分析车辆制动器摩擦温度场的基础上 ,研究蠕墨铸铁在铁道车辆制动系统中的使用性能 ;研究结果表明 ,在车辆制动器服役条件下 ,摩擦速度与接触压力的提高 ,摩擦副的摩擦系数显著降低 ,磨损率显著增加 ;在所研究的不同石墨形态的铸铁中 ,蠕墨铸铁不但具有低而稳定的磨损率 ,而且具有高而稳定的制动性能 ,是制造车辆制动器部件的合理选材。     

掺杂石墨/Cu钎焊接头残余应力的分布特征及中间层的作用

利用有限元方法,模拟分析了掺杂石墨/Cu钎焊接头残余应力的分布特征。分析结果表明,对接头有害的较大残余应力分布在石墨棱角距离焊缝约0.8mm处的狭小区域;降低连接温度、减少连接时间及增加钎焊压力均有利于减小接头残余应力,优化接头的界面应力状态;中间层的加入在一定程度上缓和了接头的残余应力。从缓和效果来看,Cu比Mo作中间层好,而Cu/Mo复合中间层的缓和效果最好,是较理想的中间层材料。     

Influence of expandable graphite on fire resistance and water resistance of flame-retardant coatings

Expandable graphite (EG) coating and ammonium polyphosphate-pentaerythritol-melamine (APP-PER-MEL) coating were prepared. Thermal degradation and char formation of the coatings were investigated by differential thermal analysis (DTA), thermogravimetry (TG), X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results have shown that the anti-oxidation and fire-resistant properties of expandable graphite coating containing EG with size of 74 μm are better than those of APP-PER-MEL coating. The static immersion test was applied to study water resistance of the coatings, and the fire protection test and mechanical test were used to analyse heat insulation and mechanical properties of coatings before and after water immersion. The fire-resistant and mechanical properties of APP-PER-MEL coating were severely damaged by water immersion, whereas EG coating containing 8.5% EG with size of 74 μm could retain the good fire resistance even after 500 h water immersion.     

同质焊缝球墨铸铁焊条的研制

研制了一种适合于球墨铸铁与球墨铸铁以及球墨铸铁与结构钢焊接的专用球墨铸铁焊条，通过试验确定了球墨铸铁焊条的合金成分并给出了比较合理的焊芯和焊条药皮化学成分。采用该焊条对球墨铸铁焊接时，可以达到同质焊缝要求。测试结果表明，焊缝金属的化学成分、金相组织均满足焊接球墨铸铁的要求，焊缝的硬度在190～230HB之间，焊缝中石墨球化稳定，焊条具有良好的焊接工艺性能。     

高炉用石墨砖的现状及问题

介绍了近年来我国高炉用石墨砖的进展和存在的问题，提出了高炉用石墨砖的改进方向。     

Microwave assisted ultrafast synthesis of graphene oxide based magnetic nano composite for environmental remediation

We have successfully synthesized multi-layer graphene oxide and graphene oxide based magnetic nanocomposite (M/GO) by microwave-assisted modified Hummers’ method for removal of toxic lead (Pb²⁺) and cadmium (Cd²⁺) ions from aqueous solution. The X-ray diffraction spectra of synthesized graphene oxide and M/GO confirm increased interlayer spacing along c-axis. Raman spectra revealed the good quality of synthesized GO and M/GO. The wrinkles were seen in the SEM images of synthesized graphene oxide. The presence of conjugated double bond (CC) and carbonyl (CO) were confirmed by using the UV–Vis spectroscopic spectra. Brunauer–Emmett–Teller (BET) analysis showed high (126 m²/g) surface area M/GO composite which accounts for large number of active binding sites for the adsorption of heavy metal ions. The adsorption studies revealed that Pb²⁺ ions were efficiently adsorbed on GO sheets. Interestingly, M/GO showed better adsorption for cadmium ions.     

六铝酸钙材料的合成及其显微结构研究

分别采用轻质碳酸钙和活性氧化铝 ,或纯铝酸钙水泥和活性氧化铝为初始原料 ,反应烧结合成了六铝酸钙 (CA6)材料 ,研究了原料和成型压力对合成材料的烧结性能和显微结构的影响 ,同时借助于XRD、TG -DSC、SEM和EDAX等测试手段对其反应过程、物相变化和显微结构进行了分析和观察。研究结果表明 :(1) 130 0℃时 ,合成材料的主晶相为刚玉相和CA2 ,并开始有CA6形成 ;温度升至14 0 0℃ ,CA6大量生成 ;15 0 0℃时反应完成 ,产物全部为CA6相。 130 0～ 15 0 0℃时 ,上述反应表现为体积膨胀过程 ,试样的体积密度和径向线收缩率随温度的变化不大 ;而高于 15 0 0℃时 ,试样明显趋向烧结 ,体积密度升高 ,线收缩率加大。采用纯铝酸钙水泥和活性氧化铝合成的试样的体积密度均高于采用轻质CaCO3 和活性氧化铝的 ,尤其在烧成温度高于 15 0 0℃时。坯体的成型压力对这两种合成试样的烧结性能均没有显著影响。 (2 )合成六铝酸钙材料的晶粒形貌与合成工艺有关 ,制备片状晶粒的六铝酸钙材料需满足两个条件 :一是晶核有足够的发育空间 ,二是从晶核生长形成片状结构需足够的物质扩散。采用纯铝酸钙水泥和活性氧化铝为原料的试样 ,其CA6晶核很容易发育成片状晶形 ,且随着坯体成型压力的增加 ,片状CA6有向等轴状发展的趋势 ;采用     

Crystallization of poly(3‐hydroxybutyrate) by exfoliated graphite nanoplatelets

Poly(3‐hydroxybutyrate) (PHB) has been shown to be efficiently nucleated by exfoliated graphite nanoplatelets (xGnP). The nucleating effect of xGnP was investigated using differential scanning calorimetry, optical microscopy and atomic force microscopy. Nonisothermal crystallization of PHB from the melt required lower activation energies for PHB containing 1 wt % and 3 wt % xGnP (?214 and ?102 kJ/mol respectively) than for pure PHB (?60 kJ/mol). A kinetic study of the PHB/xGnP crystallization employing a modified form of the Avrami equation revealed that the presence of xGnP increased the PHB crystallization temperature, as well as the crystallization rates, and generated smaller and more numerous spherulites. Optical microscopy and atomic force microscopy confirmed the incorporation of xGnP into the lamellar structure of the PHB spherulites and provided insight into the influence of xGnP on spherulite size and lamellae thickness. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

三氯化铁为插入剂制备膨胀石墨

探讨了三氯化铁为插入剂的膨胀石墨的制备技术，分析了反应物与膨胀容积、硫含量之间的关系。     

石墨电极炼钢时受力状态的有限元研究

采用有限元法对比研究了φ５００ｍｍ的日本电极和国产电极炼钢时电极－接头连接区的热应力分布，对结果进行了分析和讨论，并提出了相应的结论和建议。