Cu－Zn－Al合金中贝氏体的有序性

本文用Ｘ射线研究了Ｃｕ－２０Ｚｎ－６Ａｌ（ｗｔ％）合金中贝氏体结构的有序性，并与马氏体结构进行了比较，实验表明，从高温Ｂ２母相和低温Ｌ２１母相生成的贝氏体中（１１５）和（２０５）衍射峰或（１２１０）和（２０１０）衍射峰是重叠的，对生成的贝氏体进行一段时间的保温或缓慢冷却处理，其衍射峰的特征并不改变，这与马氏体（１１５）和（２０５）衍射峰或（１２１０）和（２０１０）衍射峰的分离特性不相符合。说明贝氏体结构有序度与马氏体明显不同，它的形成不可能继承母相的有序度。     

机械研磨 Ni_(50)B_(50)合金形成非晶的过程

本文研究了机械研磨 Ni_(50)B_(50)合金非晶的形成过程。唯象地提出用 J-M-A 方程描述此过程,并作了简单的讨论。     

钻井液与油气层损害及保护室内研究中的数学方法

介绍了在钻井液与油气层损害及保护研究领域里常用的数种具有推广应用价值的数学方法，说明了各种方法的基本原理及其在此研究领域中的具体应用成果。     

KJ19型煤矿安全监控系统特点及应用

介绍了KJ19型煤矿安全监控系统组成、功能及使用效果。     

低压低渗气藏钻探过程中的保护方案

针对鄂尔多斯塔巴庙区块低压低渗气藏物理特性复杂的情况，推荐一套切实可行的气层保护方案。即实行全面钻井液监控；采用欠平衡钻井技术；储层保护前期研究；采用与地层流体配伍性好的阳离子钻井液体系；降低钻井完井液的滤失量，API滤失量小于5mL、高温高压滤失量小于15mL、固相含量小于8％、含砂量小于0．3％；根据储层裂缝的宽度和走向使用保护剂；对裸眼完钻的气层利用洗井清除井壁附近的污染带，恢复储层原始渗透率；固井作业防止气窜；采用具有抑制地层水敏、速敏保护气层的优质射孔液；水力压裂优化压裂设计，严格压裂施工。总之，气层保护技术是一个系统工程，任何一个环节的问题，都将对气层产生伤害．因此需加强气层保护研究，做到在钻开气层到投产的每道工序都采取积极有效的气层保护措施。     

ZrO_2（Y－TZP）－Si_3N_4复合材料中抑制ZrN生成研究

研究了气氛加压烧成ＺｒＯ２（Ｙ－ＴＺＰ）－Ｓｉ３Ｎ４复合材料中抑制ＺｒＮ生成工艺问题，相组成分析表明：无论添加２０ｗｔ％工业ＺｒＯ２或者Ｙ－ＴＺＰ（３ｍｏｌ％Ｙ。Ｏ。）的氯化硅复合材料，在低于１８５０℃，３ＭＰａｋ气压力下烧成，表面无ＺｒＮ生成．通过加入有效的烧结助剂（Ｙ。Ｏａ＋ＡＩ。Ｏｓ）、增加埋粉中ＳＩＯ分压以及增加保护气氛氮气压力，适当的烧成条件等工艺措施可有效地抑制ＺｒＮ的生成．实验还证实了ＺｒＮ很容易氧化，含有ＺｒＮ的ＺｒＯ。（Ｙ－ＴＺＰ）－ＳｉｓＮ。复合材料试样经９００℃，０．ｓｈ热处理已粉碎性裂开．     

Investigation of Scale Formation in Heat Exchangers of Phosphoric Acid Evaporator Plants

The primary problem in concentrating phosphoric acid is due to fouling on the tube‐side of the heat exchangers of the evaporator units. Scaling on the heat transfer surfaces occurs because of high supersaturation of phosphoric acid liquor with respect to calcium sulphate. A review of the existing literature reveals that no information is available on heat transfer and on crystallization fouling of industrial phosphoric acid solutions. In this investigation, the solubility of different calcium sulphate types in phosphoric acid solution was studied and its dependency on acid concentration and temperature was investigated. A large number of fouling experiments were carried out in a side‐stream of a phosphoric acid plant at different flow velocities, surface temperatures and concentrations to determine the mechanisms, which control the deposition process. After identifying the effects of operational parameters on the deposition process, a model was developed for prediction of fouling resistances. The reaction of calcium sulphate crystallization followed a second order rate with respect to the supersaturation. The activation energy evaluated for the surface reaction of the deposit formation was found to be 57 kJ/mol. The predicted fouling resistances were compared with the experimental data. Quantitative and qualitative agreement between measured and predicted fouling rates is good.     

河北省张承地区风沙现状及治理对策

在分析张家口、承德地区风沙形成原因及发展趋势的基础上,提出了河北省防沙治沙工作中存在的问题,根据河北省不同类型区的自然、地理及社会经济条件,提出了风沙治理模式和建议。     

Analytic and numerical calculations of the formation of a sulphuric acid aerosol in the upper troposphere

Analytic and numerical calculations are performed on the production of sulphuric acid aerosol in conditions of a very large nucleation event observed in the upper troposphere. The numerical results feature a growing peak in the size distribution whose magnitude is reproduced well analytically, and are consistent with the observed particle number concentration at sizes greater than 25 nm (measured dry diameter), but suggest that most of the aerosol was at unobserved smaller sizes. Because of growth and coagulation, number concentrations of the aerosol rapidly become independent of the number initially nucleated, so that conclusions as to the nucleation process, either homogeneous or ion-induced nucleation, cannot easily be drawn from existing atmospheric observations. The final concentration is very insensitive to the magnitude of the SO₂ source, but, if condensation on, and coagulation with, a remnant background aerosol occurs, such nucleation events will be cut off for source magnitudes less than a specific value. Anthropogenic emissions of SO₂ which exceed this value can produce higher aerosol number concentrations in the atmosphere with consequences for the indirect effect of aerosols on the climate.     

高密度钻井液随钻堵漏技术研究

地层和油气层分布的特点，使塔里木盆地易发生高密度条件下的井漏。多种堵漏处理措施，如降排量、降密度、静止堵漏、随钻堵漏、桥接堵漏、注水泥堵漏等都没有很好地解决这类漏失问题。根据井漏及堵漏情况，开发出了高密度条件下使用的随钻封堵护壁剂。该堵漏剂主要以改性纤维作为骨架材料，改性沥青和天然有机高分子作为填充材料，以弱交联聚合物为变形填充材料，并辅以有机硅为粘结护壁材料，是一种具有物理化学堵漏功能的新型随钻堵漏剂。经流变性、砂床滤失性、润滑性、油层保护性等性能评价，表明该处理剂加入后，对钻井液流变性影响小、可辅助降低API滤失量和润滑系教、能碴著降低砂床滤失鼍。同时还具有一定的保护油气层的功能。