半导体激光器到单模光纤耦合技术的现状及发展趋势

简要阐述了半导体激光器到单模光纤的耦合损耗来源，详细介绍和分析了耦合技术的发展和现状，并探讨了耦合技术的发展趋势。     

横观各向同性土介质与结构物共同作用的有限元与边界元耦合分析

本文采用有限元与边界元耦合方法对上与结构物进行共同作用的分析．其中上部结构采用有限元子结构法，地基上考虑为横观各向同性特性，应用边界元法，通过基础界面上位移连续、面力平衡的条件进行耦合分析．编制了相应的计算程序，对某高层空间剪力培与地基的共同作用进行了计算，与有限元法和实测结果进行了对比分析，得到了满意的结果．说明：有限元和边界元的耦合方法能充分发挥两者的优越性，不失为共同作用分析的一种有效途径．     

Heat transfer in YBaCuO thin film/sapphire substrate system

The thermal boundary resistance at the YBaCuO thin film/Al₂O₃ substrate interface was investigated. The transparency for thermal phonons incident on the interface as well as for phonons moving from the substrate was determined. We have measured a transient voltage response of current-biased films to continuously modulated radiation. The observed knee in the modulation frequency dependence of the response reflects the crossover from the diffusion regime to the contact resistance regime of the heat transfer across the interface. The values of transparency were independently deduced both from the phonon escape time and from the time of phonon return to the film which were identified with peculiarities in the frequency dependence. The results are much more consistent with the acoustic mismatch theory than the diffuse mismatch model.We are grateful to A. Elantev for helpful discussion. We acknowledge the financial support of the Russian Scientific Council on the HTS problem (Project No. 90462).     

AlSn20Cu/Steel双金属板(带)复合轧制过程的厚度匹配

通过对AlSn20Cu/Steel双金属板(带)复合轧制过程变形区变形规律的分析，确定了轧制过程的总变形率与各分层变形率的关系，解决了实际生产中各分层原料的厚度匹配问题。     

双相位共轭镜的工作条件参数分析

本文讨论了纯扩散机制的光折变晶体用作单作用区的双相位共轭镜（ＤＰＣＭ）时的阈值耦合强度和允许的输入光强比范围，并与双作用区的情况进行比较后，给出了在输入光强比远离１的条件下，双相位共轭镜的正常工作的条件参数。     

反应堆堆芯围筒结构热流固耦合热变形分析

针对反应堆堆芯围筒热流固耦合问题,采用三维有限元法研究堆芯围筒的热变形.考察ANSYS的三维实体热单元SOLID 70,三维实体单元SOLID 45,三维表面热效应单元SURF 152和三维热-流耦合管单元FLUID 116等单元类型的特点和实用性.建立堆芯围筒、吊篮和冷却剂的温度分析有限元模型：堆芯围筒和吊篮采用SOLID 70,结构表面与冷却剂的对流传热表面采用SURF152,堆芯围筒与吊篮之间冷却剂采用FLUID 116.采用SOLID 45建立堆芯围筒有限元模型,根据得到的堆芯围筒、吊篮和冷却剂的温度场结果分析堆芯围筒热变形.结果表明,在考虑堆芯围筒及吊篮固体和流体的交叉耦合的基础上,采用三维有限元法能比较客观地模拟反应堆堆芯处的复杂运行环境.     

面向高端装备制造CAE技术的机遇和挑战

针对高端装备制造在设计、分析、制造、服役和维护等全过程中对CAE的需求,从结构、流体以及流固耦合等3个方面概述CAE技术国内外进展及其面临的机遇和挑战,指出在发展具有能够对装备在极端服役环境下准确的结构、流体和流固耦合CAE分析技术的基础之上,需不断突破面向工程应用的多物理场耦合、跨尺度分析、多学科综合设计、产品性能评估和集成等关键技术,使CAE逐步向支持现代设计和全寿命周期管理转变.     

基于FPGA的开关量输入模块设计

在测控系统中,经常需要对各种现场信号进行采集;该模块主要实现对开关量状态信号进行实时监控,记录状态信息,为故障诊断提供依据;在设计中,采用了光耦隔离器件对输入信号进行了隔离和抗干扰处理,使用了FPGA实现了数据实时采集和中断处理,最后经PCI总线与主机进行数据交互;在故障诊断系统中,该信号采集板工作稳定、可靠,能够满足系统的实时性要求。     

Stability analysis and H∞ control for hybrid complex dynamical networks with coupling delays

This paper formulates and studies a model of complex dynamical networks with switching topology and coupling delays. Based on the hybrid control and Lyapunov function, the stability and robust H_∞ control of such networks with impulsive and switching effects, which have not been studied before, are addressed with some criteria derived. Examples are given to illustrate the effectiveness of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Floral volatiles ofTanacetum vulgare L. attractive toLobesia botrana den. et schiff. females

The European grapevine moth (EGVM),Lobesia botrana, is a major pest of grapes in Europe. Females are attracted to a nonhost plant: tansy (Tanacetum vulgare L.), which is a common weed in Slovakian vineyards. A steam distillate extract of tansy flowers was analyzed by means of a GC-EAG technique to screen constituents detected by the olfactory receptors of EGVM females. From more than 200 GC peaks, nine peaks corresponding to monoterpenoids released an EAG response in more than 70% of the females (N=15):p-cymene,d-limonene,-thujene,-thujone,-thujone, thujyl alcohol, terpinene-4-ol, (Z)-verbenol, and piperitone. The steam distillate of tansy as well as a synthetic blend of identified compounds released consistent attraction in a field cage. The use of nonhost plants and host plant odors in integrated pest management is discussed.