Role of deposition parameters on microstructure and mechanical properties of chromium oxide coatings

Chromium oxide coatings were deposited by reactive magnetron sputtering on high speed steel (HSS) substrate under various oxygen flow rates and radio frequency (RF) powers. The effect of deposition conditions on the microstructure, hardness and critical load of chromium oxide coating failure was studied. The results indicated that a crystalline chromium oxide coating formed at a high oxygen flow rate and a low RF power exhibited a higher hardness and a lower critical load as compared to a chromium oxide coating with an amorphous microstructure.     

Fabrication of composite wire of lead coated on glass fiber by extrusion

1　INTRODUCTIONCoatingglassfiberwithleadproducesakindofnewcontinuouscomposite ,whichcanfindwideap plicationsinmanydifferentfields ,especiallyinthebatteryoftheEVsandHEVsthathasalreadybecomethemostimportantgoalinmostcountries[13] .Withakindofspecialtechnologythiskindofnewcompos itewirecanbeusedtoproducegridsofnewleadacidbatterythatisveryusefultotheEVsandHEVs .Thiskindofnewleadacidbatteryhasmanyadvan tages ,suchashigherspecificenergy ,lessinnerresis tance ,morequicklychargingcapabilityand…     

压入深度与膜厚对薄膜与基体复合硬度及弹性模量的影响

根据高华建的复合弹性模量模型，提出了用一个测点的载荷-位移曲线计算整个压入深度内薄膜和基体复合硬度分布的方法，探讨了压入深度与膜厚对硬度与弹性模量测量值的影响，指出可由膜-基复合性能反推膜本身的性能。     

对涂料发展史及其系统的探讨

提出了涂料发展的三个时期与四个阶段的理论。同时指出,伴随涂料不断发展过程,发生了四次概念更新。在此基础上,提出了广义涂料概念和涂料大系统的新观点,以及建立涂涂层系统料新的理论体系的设想.     

HVOF喷涂NiCr-Cr3C2过程中Laval管壁结瘤成因的探讨

围绕超音速火焰喷涂NiCr-Cr3C2涂层时在Laval管内壁产生结瘤的问题，在分析结瘤产物显微结构的基础上探讨了形成结瘤的原因。研究发现，结瘤产物具有层状组织结构，说明结瘤的形成机制与涂层形成机制相似；在HVOF喷涂时，导致Laval管内壁结瘤的原因主要包括：喷涂材料、喷涂粉末颗粒粒度、喷涂工艺参数、Laval管的内表面粗糙度。     

钢铁构件表面上的无机富锌涂层

阐述了无机富锌涂层的研究、发展、特性和应用，指出无机富锌涂层具有杰出的耐环境侵蚀性能、耐化学性、耐溶剂性、耐辐射性、耐热性，在恶劣腐蚀环境下它是钢结构件的最佳底涂层。     

铝电解槽TiB2涂层阴极技术

将含有ＴｉＢ２、碳纤维和热固性粘结剂的涂料，涂敷到铝电解槽的阴极基体上，制备出可润湿的阴极表面。经固化和碳化后，涂层和碳质基体材料的粘结力强，热膨胀匹配性好。每台硼化钛涂层阴极试验槽能节省ＮａＦ２５０～３００ｋｇ，试验槽的电流效率高出对比槽１．４４％，能耗降低１７５～２１１ｋＷ·ｈ／ｔＡ     

Formation of nanostructured YSZ/Ni anode with pore channels by plasma spraying

YSZ/Ni is the conventionally most used material for making the anode of a solid oxide fuel cell. Agglomerated nanostructured YSZ/NiO powders and plasma spray are applied to produce nanostructured YSZ/NiO coatings on porous support substrates. After reduction in an ambient atmosphere of 7% hydrogen and 93% argon at about 800 °C for 4 hours, a novel SOFC anode with nanostructured characteristics such as nano YSZ particles, nano Ni particles, nano pores and nano pore channels is produced. This new YSZ/Ni anode provides larger triple phase boundaries for hydrogen oxidation reactions. X-ray diffraction patterns of these YSZ/NiO coatings after 1 h of heat treatment at temperatures from 700 to 1100 °C are obtained and Scherrer analysis is conducted to study the effect of temperature on grain size. The results obtained from SEM, TEM, XRD and EDX measurements and analyses are presented in this investigation.     

快干涂料铸渗法获得铸件表面复合层的研究

对快干涂料法铸渗工艺进行了研究。查明了影响铸件表面复合层质量的主要工艺因素,确定了最佳工艺参数,为生产实践提供了依据。     

Corrosion resistance of the electro-galvanized steel treated in a titanium conversion solution

The conversion coating can be obtained by using a solution containing titanium tetrachloride, fluorosilicate acid and nitric acid. The results of X-ray photoelectron spectroscopy (XPS) showed that the titanium conversion coating consisted of ZnO, TiO₂ and Zn₄Si₂O₇(OH)₂. The formation process of the titanium conversion coating was studied. Effects of the immersion time, pH value and solution temperature on the corrosion resistance and the chemical composition of the titanium conversion coating were investigated by the salt spray test (SST) and XPS, respectively. The results of XPS and SST showed that the titanium conversion coating displayed better corrosion resistance with higher contents of Si and Ti. Results of corrosion tests (the salt spray and electrochemical test) indicate that the corrosion resistance of the conversion coating by titanium solution is better than that of the conversion coating using the traditional chromate solution.