激光加热在Al2O3/Ti系梯度功能材料制备过程中的作用及机理

梯度功能材料是一种界面连续化的新型复合材料,本文研究了激光加热在合成Al2O3/Ti系梯度功能材料过程中的作用和机理,同时用激光大光斑加热方法制备出直径11mm厚度3mm完整的FGM试样并加以分析,以及首次采用在试样中埋设微细热电偶成功地测出了激光加热造成的温度梯度分布。     

应用图论及广义简约梯度法进行压力管网优化设计

广义简约梯度法(GRG)是非线性规划算法中最有效的算法之一，本文把图论应用于广义简约梯度法优化的过程中，使输入简便，计算简化，应用GRG算法对武汉市的汉阳管网进行了模拟优化设计，并对管段的计算管径用线性规划法进行标准化，取得了满意的结果     

����������Ͳ�¶ȷֲ�����

凝析气井井筒温度分布是进行气井节点分析和动态分析必不可少的参数。根据传热学原理推出了凝析气井井筒温度分布计算公式，研究了温度计算基础数据求取方法，分析了产气量、产水量、井深及油管直径对井口温度的影响规律。对某一井深为５４００ｍ的凝析气井进行了计算，该气井气油比为３０００，含２３％的Ｈ２Ｓ和４％的Ｎ２；地层温度为１３４℃。计算结果表明：井口实测温度与计算温度的相对误差为０２％～３８％，符合工程精度。气井温度随井深不呈线性分布；气井井口温度随产量、井深增加而增加，随油管直径减少而减少；该公式同时适用于干气井、湿气井和凝析气井的温度分布计算，计算精度符合工程精度要求。     

纳米聚N-异丙基丙烯酰胺微凝胶的光引发聚合

选择具有温敏性的高分子单体N－异丙基丙烯酰胺（N－isopropylacrylamide，NIPAM）为主单体，N，N′－亚甲基双丙烯酰胺（methylenebisacrylamide，MBA）为交联剂，运用光引发无皂乳液聚合的方法合成出粒径小于100nm的高分子微凝胶，并研究了在改变体系组成和条件时微凝胶粒径的变化。结果显示，在乳化剂临界胶束浓度以下，随着乳化剂浓度的提高，微凝胶粒子的粒径不断关小且趋向稳定；相比于热引发，产生的微凝胶具有较高的单分散性而且粒径较小。     

利用梯度方向信息的随机Hough变换

针对随机Ｈｏｕｇｈ变换（ＲＨＴ）在处理复杂图像随机采样造成的大量无效积累提出一种改进的用于直线检测的ＲＨＴ，较发地解决了无效果累积问题，并使改进后的算法具有计算速度更快，占用内存更少以及检测性能更好等优点。     

Introduction to geothermal exploration on ascension island, South Atlantic Ocean

The exploration for a geothermal resource on Ascension Island utilized a strategy that initially employed geologic mapping. On the basis of this, subsurface faults were mapped using an aeromagnetic survey. The faults were then explored using electrical resistivity surveys to define areas of potential hydrothermal fluid up-welling. The results of all of these techniques were used to site temperature gradient holes. A deep geothermal exploration well was then drilled in the area with highest heat flow adjacent to a rhyolite-to-trachyte volcanic complex.     

Comparison of Displacement and Mixing Diffusers

In order to cumpare the peformance of different supply diffuers of ventilation air, the airflow passern, temperature stratifiation and contaminant dispersion in a furnitured office ventilated by three kinds of air diffuer were numerically investigated. The air diffuers studied in this paper are a quarter-cylinder displacement diffuer on the floor and mixing diffuers (linear and vortex diffuers) on the ceiling. The heat sources in the of-fice are considered to be 50% convective and 50% radiative. The k-? two-equatwn model of turbulence is employed to predict the turbulent diffusion. The results show that the displacement diffuser provides a rather uniform flow field with low velocify in most areas, and the vertical temperature difference from floor to ceiling is as high as 6 K. With the linear diffuser, the air velociry is high, and the temperature is uniform both horizontally and vertically. The air velocity generated by the vortex diffuser is moderate. The distributions of the temperature and the contaminant are rather uniform.     

滁州市农贸市场超长预应力楼盖的设计分析

滁州市农贸市场超长预应力楼盖温度应力有限元分析及设计原则。     

智能压力传感器

讨论了压阻式智能传感器的设计,并以80C31单片机为核心构成了一个能检测压力、温度的智能传感器,它能实现量程的自动变换、故障的自诊断及数据的处理,通过软件实现了对半导体传感器的零点修正、非线性修正及温度补偿。实验表明,传感器的智能化改善了传感器的性能。     

棒材穿水冷却过程温度场有限元分析

针对棒材穿水冷却过程,利用ANSYS有限元分析软件建立了棒材温度场预报模型,研究了棒材穿水冷却过程中的热边界条件,分析了棒材温度场的分布及其变化规律。该模型的计算结果与实测值吻合较好,能够准确地预测棒材穿水冷却后的温度分布和最终的组织。