Modern interpretation on the high-stretching of natural rubber attained by the classic ‘racking’ method

To investigate the mechanism of high elongation of natural rubber attained by the ‘racking method’, a strip of smoked-sheet was elongated up to 150 times in length, by stretching rapidly at room temperature and forcing to shrink at 75-80 °C repeatedly. On X-ray diffraction, a typical fibre pattern with an amorphous ring appeared already at ×10 (stretch ratio=10). The degree of crystallinity increased to the level of 17-18% at ×20 and turned to decrease after ×60, but the degree of crystallite orientation reached at a high level already at ×10 and did not change significantly and the half-height width of reflection profiles stayed almost at a constant level, while the Young's modulus increased up to ca. 300 MPa at ×100 and then fell rather discontinuously. It was assumed that some fractions of chain segments between entanglements were gradually broken in each step of stretching operation, rather than disentangled and slipped.     

SC文法功能体系

文法体系的研究一直是自然语言处理研究的核心问题之一.但是,由于自然语言本身所固有的复杂性和非规范性,多义问题始终未能得到圆满的解决.本文提出了SC文法(A SubCategory grammar for integrating Se-mantic and Case analysis),它是一种基于传统的上下文无关文法、语义文法,以及超前与反馈分析技术和格框架约束分析等技术的上下文相关处理文法.该文法不仅能继承传统的上下文无关文法的表示简洁、处理方便的特点,而且能实现语法和语义一体化分析和处理上下文相关以及复杂多义问题.     

全国土壤中天然放射性核素含量调查研究（1983—1990年）

中国土壤中天然放射性核素含量调查(1983—1990年)是中国环境天然放射性水平调查研究的一部分。本文作为分报告之一,系根据全国29个省、市、自治区(不包括台湾省,海南省包括在广东省内)的调查结果整理编写而成,主要报告这项调查的方法和结果。本调查在全国按均匀网格布点,并区分不同成土母岩母质、土壤类型进行加密布点,在天然γ辐射剂量率局部异常地区以及部分核企业和放射性伴生矿等对环境可能产生放射性污染的地区,也作了加密布点。本调查布点区域复盖面积约占全国总面积的80%。采样点基本与陆地γ辐射剂量率测点同位布设,土壤采样与陆地γ辐射剂量率测量同步进行。全国共采集土壤样品13866份;分析测量了11216份,其中网格点样品9114个,加密点样品2102个。本报告主要结果由7777个25×25和50×50 km 的基本网格点分析数据统计得到。本调查主要结果如下:(1)全国土壤中天然放射性核素~(238)U、~(226)Ra、~(232)Th、~(40)K 含量按面积加权平均值(±单次测量标准差)分别为39.5(±34.4)、36.5(±22.0)、49.1(±27.6)、580.0(±202.0)Bq·kg~(-1),范围值分别为1.8—520.0、2.4—425.8、1.0—437.8、11.5—2185.2 Bq·kg~(-1)。(2)土壤中天然放射性核素含量与成土母岩母质类型明显相关。由1552个不同成土母岩     

Experimental investigation of natural convection from a horizontal ice surface melting in pure water

A study on natural convection from a horizontal ice surface melting in pure water was conducted experimentally for the ambient water temperature from 2▿C to 10°C. Natural convection flow around upward-or downward-facing horizontal ice plate was divided into three regions according to the temperature variation of ambient water. The flow patterns of three regions were no flow, two-dimensional steady laminar flow and unsteady flow. Mean Nusselt number for the upward-facing surface had its maximum value at about 3°C of ambient water temperature. However, in the case of the downward-facing surface it increased as the ambient water temperature increased.     

A new ‘tailor-made’ methodology for the mechanical behaviour analysis of rubber-like materials: I. Kinematics measurements using a digital speckle extensometry

This paper is the first part of a work devoted to the setting-up of a methodology for the mechanical behaviour characterization of rubber-like materials, using a digital speckle extensometer. We present here the experimental approach, specific to large strain measurements. The proposed method is based on in-plane kinematics measurements using an optical extensometer. The whole two-dimensional field of in-plane displacements is obtained by a digital image processing. We discuss then the correlation calculations and how to achieve the optimal subset matching. Next, we specify how to derive the principal stretch ratios, and the accuracy on these components, issued from a subsequent numerical calibration.Finally, we present experimental data dealing with a carbon black, filled natural rubber, issued from uniaxial traction tests, pure shear tests, and tensile tests performed on double-edge notched tensile specimens.     

Effect of material and process parameters on the mechanical properties of unidirectional and multidirectional flax/polypropylene composites

Unidirectional (UD) and multidirectional (MD) flax/polypropylene composites were studied. Flax with varying retting degree and boiled flax was used as reinforcement for the UD composites and unmodified and maleic acid anhydride modified polypropylene (MAA-PP) was used as matrix. Multidirectional flax/polypropylene composites were manufactured on laboratory scale and on pilot scale. They were made from needle-punched hybrid flax/PP non-wovens. Normally retted flax as well as boiled flax was used. For the specimens made on pilot scale, a third kind of flax, namely bleached flax was also studied. The influence of different process times and temperatures on the mechanical properties of the composites was analysed. Generally, the composites have adequate good mechanical properties. The unidirectional composites of boiled flax combined with MAA-PP show the best mechanical properties. Contrary to the UD composites, flax treatment did not lead to the expected property improvements for MD composites.     

天然气管道燃压机组的性能试验及见证

结合西气东输管道工程燃气轮机驱动压缩机组设备订货及验收中对性能试验项目的确定、工厂试验及见证过程,介绍了燃压机组性能试验项目所涉及的主要内容、执行标准、需要达到的技术指标,各种性能试验的基本情况,买方参加工厂试验见证中需要重点处理好的问题等。以期为我国其他大型长输天然气管道机组订货及试验见证工作提供借鉴。     

��չ����Ȼ��Ϊԭ�ϵ�ȼ�ϵ������

研究燃料汽车及其氢源系统是当今国内外能源工业与汽车工业的共同课题，而优选制氢能源则是这一课题的关键。章介绍了利用能源、经济、环境(EEE)——生命周期评估(LCA)这一综合评估方法，针对以天然气、煤或石油作为制氢能源的多种燃料电池氢源供应方式以及配套的燃料电池汽车系统，从经济性、能源利用效率和环境影响三个方面进行了生命周期清单分析和EEE综合评价。结果显示：天然气作为发展燃料电池汽车氢源的一次能源，具有氢制取技术路线多样化、经济上竞争力强、能源利用效率高和环境效益好等诸多优势，应为燃料电池汽车的首选制氢能源。对这一评估模型的敏感性分析显示，即使在天然气价格波动较大时，天然气制甲醇--甲醇车载重整车和天然气制氢--纯氢车这两个方案仍然最具优势。     

In-Situ Wet Chemical Composition of Multicomponent Precursors to Blue Emitting Sr2CeO4 Phosphors

Hybrid precursors were assembled with cerium coordination polymers, polyethyl glycohol (PEG), SrCO3 and other functional components using a modified in-situ chemical polymeric gel technology. The hybrid precursors were calcinated to achieve the Sr2CeO4 phosphors, whose particle sizes were in the range of micrometer by XRD and SEM. The photoluminescence spectra indicate that the phosphors present a strong blue emission.     

Numerical simulation of developing natural convection in an enclosure due to rapid heating

Effects of thermoacoustic wave motion on the developing natural convection process in a compressible gas-filled square enclosure were investigated numerically. In the cases considered, the left wall temperature is raised rapidly (impulsively or gradually) while the right wall is held at a specified temperature. The top and the bottom walls of the enclosure considered are thermally insulated. The numerical solutions of the full Navier-Stokes equations were obtained by employing a highly accurate flux-corrected transport algorithm for the convection terms and by a central differencing scheme for the viscous and diffusive terms. The strength of the pressure waves associated with the thermoacoustic effect and resulting flow patterns are found to be strongly correlated to the rapidity of the wall heating process. Fluid thermal diffusivity was found to affect the strength of the thermoacoustic waves and the resulting interaction with the buoyancy-induced flow.