VDC-VC悬浮共聚树脂的颗粒特性研究

合成了偏氯乙烯(VDC)-氯乙烯(VC)悬浮共聚树脂，研究了聚合时间分散剂用量和搅拌器转速等对共聚树脂颗粒特性的影响。结果表明：树脂粒径随聚合时间延长而增大，并趋于定值；增加分散剂用量，粒径先减小后增大，当分散剂用量为0．12％时，平均粒径最小；平均粒径随搅拌器转速提高呈马鞍形变化，在130r／min时粒径最小，树脂颗粒形态规整。     

Growing Innovative Calcium Carbonate Morphologies by Utilizing the Colloidal Gas Aphron System as a Surfactant-Based Template Method

Many studies have been conducted to study the various polymorphs and morphologies of calcium carbonate crystals in nature and living organisms. In this experimental work, a novel method has been employed to crystallize calcium carbonate by using colloidal gas aphron dispersion. The polymorph and morphology of prepared particles were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectrometry techniques. SEM and XRD analyses demonstrated that the morphology of synthesized CaCO₃ can be changed from spherical (vaterite phase) to novel rod and plate-like shapes (mixture of vaterite and calcite phases) with changes in the surfactant concentration. The quantitative examination results of different calcium carbonate polymorph orientations showed that the precursor concentrations had no significant effect on the orientation of calcite phase, but rather they affected the orientation development of vaterite phase at a higher surfactant concentration.     

One-step synthesis of high purity ZnO micro/nanostructures from pure Zn and pre-alloyed brass powders by vapor phase transport

In this research, vapor phase transport (VPT) was introduced as a facile, inexpensive method to produce ZnO micro/nanostructures from various Zn sources such as pure Zn and alpha brass pre-alloyed powders (Cu–20Zn and Cu–28Zn) at different processing temperatures of 930 °C–1050 °C. Simultaneous thermal analysis (STA) was carried out to investigate Zn evaporation and ZnO micro/nanostructure formation. STA results showed an exothermic peck at 711 °C and 728 °C for Cu–20Zn and Cu–28Zn, respectively, due to oxidation of the evaporated Zn element and formation of ZnO micro/nanostructures. X-ray diffraction results showed that high purity ZnO micro/nanostructures were successfully synthesized via VPT process and the crystallite size was increased from ~60 nm to ~100 nm with increasing processing temperature. Field emission scanning electron microscopy observations showed morphology (e.g. rods, column, tetrapods, and combs) and size of the synthesized micro/nanostructures were dependent on the Zn sources and processing temperature, in which average diameter of the synthesized ZnO structures was increased with increasing the processing temperature. The smallest (98 nm) and largest (603 nm) average diameters of synthesized ZnO micro/nanostructures were attained from the pure Zn and Cu–28Zn brass powders at 930 °C and 1050 °C, respectively.     

Barrier property by controlled laminar morphology of LLDPE/EVOH blends

Using the extrusion blown film process, we obtained linear low density polyethylene (LLDPE)/ethylenevinyl alcohol copolymer (EVOH) blends with an improved barrier property by generating a laminar structure of the dispersed phase in the matrix phase. This laminar morphology induced by drawing and blowing was found to result in a significant decrease in toluene permeability with only 10 wt% EVOH. Effects of compatibilizer content and processing parameters such as blending sequence, screw configuration, and stretch ratio on the toluene permeability and morphology of the blends were investigated. It was revealed that the optimum amount of compatibilizer, maleic anhydride grafted LLDPE, should be used to improve the barrier property of the LLDPE/EVOH blends with a well developed laminar structure. The blending sequence had a significant influence on the permeability of the blends. The blend films exhibited a more pronounced laminar structure when all blend components were simultaneously melt blended in a single screw extruder. In addition, the screw configuration designed to impart a low shear stress and the balanced stretching in the machine and transverse directions were more favorable processing conditions in obtaining high barrier blends.     

Synthesis, characterization and photocatalytic activity of β-Ga2O3 nanostructures

Nanostructured β-Ga₂O₃ samples were prepared by a combination of the solvothermal processes and subsequent heat treatments. β-Ga₂O₃ samples with various morphologies were obtained by using different kinds of solvent, including water, isopropanol and ethylene glycol. One-dimensional β-Ga₂O₃ nanorods were obtained in water medium, while β-Ga₂O₃ spheres were prepared in alcohol. The possible mechanism related to the phase formation and morphology of the as-prepared materials was discussed. Photocatalytic performance of the synthesized β-Ga₂O₃ samples was also examined. Results revealed that β-Ga₂O₃ sample prepared with ethylene glycol showed the highest photocatalytic activity for the degradation of salicylic acid. This could be ascribed to the high surface area, abundant hydroxyl groups, and wide band gap of β-Ga₂O₃ sample synthesized in ethylene glycol.     

ABS／PC／MMA类共聚物Q三元共混体系的性能和形态

本文研究了ABS/PC甲基丙烯酸甲酯(MMA)共聚物Q三元共混物的性能与Q含量的关系,对不同Q含量下共混物的拉伸、冲击、弯曲、耐热、熔体指数等性能进行了测试,并用扫描电镜观察了该三元共混物的形态。结果表明,加入共聚物Q可增加共混体系的相容性,在适当组成下可使共混物的弯曲强度提高到原来的1.7倍,同时其他力学性能有所提高或不受损失;共混物的熔体指数能符合工业生产要求。从经济角度看,Q价格也较低。因而ABS/PC/Q三元共混物可望开发为具有重要实际意义的塑料合金。     

The physical character of coal char formed during rapid pyrolysis at high pressure

Rapid pyrolysis was conducted in a drop tube reactor using seven coals under various operating conditions. In addition to dense char, porous chars (network char and cenospheric char) were formed by the rapid pyrolysis under certain conditions. Porous char was mainly composed of film-like carbon and skeleton carbon. The pyrolyzed coal char particles were characterized in detail. Morphology and bulk density of porous char were quite different from the dense char formed under the same conditions, but elemental composition and BET surface area were similar to each other. CO₂ gasification reactivity of porous char was lower than dense char in the later gasification stage, and this was ascribed to the low reactivity of skeleton carbon.     

稀土变质处理加热处理对低铬白口铸铁碳化物形貌及力学性能的影响

从改善低铬白口铸铁碳化物形貌出发,研究了稀土变质处理和热处理的作用。结果表明：综合运用稀土变质处理和热处理是改善低铬白口铸铁共晶碳化物形貌、提高综合力学性能的有效途径。     

复杂背景下设备防篡改技术的研究

当今社会,科学技术飞速发展,传统的设备防篡改技术面临巨大挑战。为此,本文提出一种复杂背景下基于图像分割和识别的设备防篡改方法。利用涂有红外涂料的标识条,以检测设备是否被篡改。在MATLAB下进行仿真分析,通过图像预处理、图像分割、图像数学形态学处理等一系列操作,最终得到正确标识条的图像,证明本文方法的可行性,并对基于图像分割和识别的防篡改技术前景进行了展望。     

Exchange of counter anions in electropolymerized polyaniline films

Mobile counter anion exchange of electropolymerized polyaniline (PANI) films with the anions in acid solutions has been investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning electron microscopy, Raman, UV-vis, and fluorescence spectra. The studied acids include camphorsulfonic acid, p-toluene sulfonic acid, HCl, HClO₄, H₂SO₄ and H₃PO₄. In two cases of small and large counter ions of PANI films, CV tests have been performed alternately three times in each of two electrolytes containing organic or inorganic acid. The investigation of electrochemical and spectrophotometric measurements reveals that large counter anions can be easily replaced by the small anions; and the reverse exchange also occurs, but shows very low efficiency. This indicates that the achieved anion exchange in both cases leads to the remarkable alteration in electrochemical behavior and electrical conductance of PANI films. This implies counter anions, whatever the original or redoping ones, play an important role in the electrical, electrochemical, even optical properties of PANI. However, the polymer morphology does not be changed after exchange tests. This allows us to point out a ‘morphology-memory’ effect which is very significant for the development and application of PANI films with the same morphology and different properties.