Film morphology and reaction rate for the CVD of tungsten by the WF6—SiH4 reaction

Journal of Electronic Materials - Low pressure chemical vapor deposition (LPCVD) of tungsten (W) by SiH4 reduction of WF6 on Si(100) surfaces was studied in a single-wafer, cold-wall reactor over a...     

高强度船板纵裂纹的成因及预防

针对高强度船板纵裂纹轧后退废过高的现状，分析原因并优化冶炼、连铸工艺及操作，有效地降低高强度船板的退废率。     

Preparation of ultra fine nickel-copper bimetallic powder for BME-MLCC

The preparation of ultra fine nickel-copper bimetallic powder with two-stage chemical reduction method was investigated. Reductive sugar and hydrazine hydrate were employed as reducing agent in different reductive stage, respectively. Reaction of CuSO₄·5H₂O with reductive sugar at 70 °C gives cuprous oxide and copper particles, then as-prepared mixture and nickelous hydroxide were reduced by hydrazine hydrate, and nickel-copper powder having excellent dispersibility was prepared. Influences of nickel added on composition and dispersibility of powder were studied. TG/DTG/DTA of nickel-copper powder, which is stable in room temperature, were discussed with thermal analyzer. Relation of nickel content to oxidation temperature was investigated. Ni-Cu bimetallic powder particles have a fully coated structure when nickel content is up to 30%. As-prepared nickel-copper powder was applied in base metal electrode-multilayer ceramic capacitor (BME-MLCC). The end termination has high adhesion force, fairly good densification, low resistivity, excellent solderibility behavior and resistance behavior to soldering.     

Dual reaction capacity of hydrogenated nanodiamond

High temperature hydrogen stream treatment of nanodiamond was shown to produce nanodiamond with bifunctional surface. OH- and different CH-groups were shown to be the main functional groups on the surface. In this article we proposed two main strategies for further chemical modification of hydrogenated nanodiamond. OH-groups were shown to react with different types of acylating agents: anhydrides and chloranhydrides. Chlorination of hydrogenated nanodiamond with molecular chlorine and its subsequent treatment with alkyllithium reagents resulted in formation of alkyl-nanodiamonds. Chlorination was shown to reduce the size of nanodiamonds aggregates. We have also applied suspension-state NMR-H1 spectroscopy to study suspensions of alkyl-nanodiamonds for the first time.     

The 2006 summary of scientific productivity of chemical engineers in Taiwan

In this report, the scientific productivity of Year 2006 of chemical engineering professionals in Taiwan was analyzed carefully with information retrieved from the database of the ISI Web of Science. The distributions of number of authors with x publication versus the number of publication x follows a general power-law trend, which coincidently comply with the Pareto distribution. The power-law indices found ranges from −1.64 to −2.22, which is consistent with values reported in the literature investigated for periods of 1907–1916 and 1969–2004.     

等离子体化学气相法沉积金刚石薄膜

本文介绍和评述了化学气相沉积法制备人造金刚石薄膜及其进展。重点评述了反应机理、发展历史、沉积方法、补底材料、检测手段。论述了有利于形成立方晶系金刚石材料的沉积条件。     

混凝土抗硫酸盐侵蚀试验的一种新方法

提出了一个测定混凝土抗硫酸盐侵蚀能力的新方法。采用这种方法对超高强混凝土的抗化学腐蚀性能进行了试验，并和普通混凝土进行了对比。发现用一般硅酸盐水泥配制的超高强混凝土虽然在抵抗化学侵蚀能力方面比普通混凝土有所提高，但由于化学组成上的原因，它对高浓度的(NH4)2SO4等化学介质也难以抵抗。     

Mobile learning in chemical engineering: An outlook based on case studies

In the context of the electronic learning (E-learning) methodology, mobile learning (M-learning) focuses on the use of portable technology (such as mobiles or tablets) and the mobility of students. E-learning, and particularly M-learning, can be implemented in combination with other pedagogical methodologies for chemical engineering teaching and learning. We can consider that the vast majority of undergraduates own personal mobile devices nowadays. Moreover, many case studies have shown that M-learning is an effective methodology to capture students’ attention and to actively engage them in the learning process. In most cases, lecturers have reported an improvement in both academic performance and qualifications and have expressed a favourable opinion towards this type of initiative in surveys. In line with the increasing interest in the incorporation of E-learning, this review discusses cases studies based on M-learning within the field of chemical engineering teaching through different technological platforms and apps which can be installed or directly used on mobile devices. All the platforms described in this work offer a free version, emphasizing the possibility of extending this methodology within the university with no need for additional economic resources.     

Developing a talent training model related to chemical process safety based on interdisciplinary education in China

While chemical industrial development in China is growing rapidly, the corresponding safety training resources remain inadequate, which may often lead to increased risk of chemical accidents. These accidents are often associated with the negligence of safety management, poor safety hazard awareness, and lack of safety practice. In order to alleviate these prominent risk factors in chemical industries in China, our study develops a talent training model related to chemical process safety. First, we propose an approach for establishing the “talent training model” related to chemical process safety, consisting of three steps: analyzing the current status and existing problems of talent training related to chemical process safety, determining the theoretical basis and training objectives for developing interdisciplinary talents, and designing a new talent training model. Second, we establish a talent training model using the proposed method, which includes a comprehensive curriculum system, a diversified teaching pattern, and a quintuple evaluation method. Furtherly, we determine the expected outcomes of the talent training model. The research results provide an innovative chemical process safety training method that is applicable nationwide, also it works as a reference for other rapidly developing countries in the chemical process industry to improve safety within the chemical industry.     

Simulation study on the gasification process of Ningdong coal with iron-based oxygen carrier

Chemical looping gasification (CLG) of Ningdong coal by using Fe₂O₃ as the oxygen carriers (OCs) was studied, and the gasification characteristics were obtained. A computation fluid dynamics (CFD) model based on Eulerian‐-Lagrangian multiphase framework was established, and a numerical simulation the coal chemical looping gasification processes in fuel reactor (FR) was investigated. In addition, the heterogeneous reactions, homogeneous reactions and Fe₂O₃ oxygen carriers' reduction reactions were considered in the gasification process. The characteristics of gas flow and gasification in the FR were analyzed and it was found that the experiment results were consistent with the simulation values. The results show that when the O/C mole rate was 0.5:1, the gasification temperature was 900 ℃ and the water vapor volume flow rate was 2.2 ml·min^-1, the mole fraction of syngas reached a maximum value of the experimental result and simulation value were 71.5% and 70.2%, respectively. When the O/C mole rate was 0.5:1, the gasification temperature was 900 ℃, and the water vapor volume flow was 1.8 ml·min^-1; the gasification efficiency reached the maximum value was 62.2%, and the maximum carbon conversion rate was 84.0%.