钨系延期药预点火反应机理研究

通过程控升温模拟点火条件，根据ＤＳＣ图谱分析，找出主要反应区的温度范围。研究结果表明，钨系延期药预点火反应是一个真正的固－固反应。     

Geochemical approach to the Bou Hadjar hydrothermal system (NE Algeria)

The Bou Hadjar low-temperature hydrothermal system is located in northeast Algeria. The four main thermal springs that are the subject of the study emerge ith temperatures between 32 and 60°C from allochthonous formations. The reservoir temperature has been estimated from chemical compositions by utilizing simultaneously the silica, gas and sulfate-water oxygen isotope geothermometers, fluid-mineral equilibrium calculations, and a mixing model. According to these thermometric methods, the most probable subsurface temperature is in the range 75–106°C. The mixing model suggests a temperature of 125°C for the parent water.     

化学镀SiCp／Ni－P复合镀层与基体结合强度及其影响因素

论述了ＳｉＣｐ／Ｎｉ－Ｐ复合镀层与钢基体的结合强度及其影响因素。复合镀层中离界面５μｍ厚度以内区域的组成及应力状态对镀层／基体的界面结合有决定性作用，在该区域以外ＳｉＣ粒径变化不影响镀层的结合强度。适当的热处理可提高界面结合力。     

Analysis of adhesive bonded composite lap joints with transverse stitching

The effect of transverse stitching on the stresses in the adhesive is investigated using an adhesive sandwich model with nonlinear adhesive properties and a transverse stitching model for adhesive bonded composite single-lap and double-lap joints. Numerical results indicate that, among all stitching parameters, thread pretension and stitch density have significant effect on the peel stresses in the adhesive; increase in the thread pretension and the stitch density leads to a decrease in peel stress in the adhesive, while an increase in other parameters generally results in a negligible reduction in peel stress. The effect of stitching was found to be negligible on the shear stresses in the adhesive. Thus it is concluded that stitching is effective for the joints where peel stresses are critical and ineffective for those where shear stresses are critical.     

Early detection of ageing in solder joints through laser probe thermal analysis of the peltier effect

We have recently developed an optical contactless method for testing the quality of solder joints during accelerated thermal cycling ageing processes.¹ The method was based upon the measurement of the dynamic thermal behaviour of the joint to short bursts of Joule heating. It has proved to be efficient in revealing the formation of cracks at the lead-solder interface. We present a method to evaluate ageing at a much earlier stage in the cycling process. We have observed in earlier work,¹ that before cracks appear, structural changes occur in the solder at the lead-solder interface. The thermal response of the solder joint is recorded over time to a Peltier heat perturbation produced by flowing a current pulse through the interface where structural changes occur. The key point in this method is to discriminate the Peltier effect from the Joule thermal response because both effects generate heat. The variation of the early Peltier response in the thermal cycling ageing tests is seen as a quantitative signature of the structural changes in the lead-solder interface.     

热力系统节能技术改造方案介绍

针对热电厂热力系统存在的浪费能源和设计不合理现象作了浅析 ,介绍了几种对热力系统进行改造的方案 ,并对取得的经济效益进行了计算。     

Optical measurements of thermal diffusivity of a material

The measurement of thermal diffusivity of a material (in particular, a thin film) is important for various reasons, e.g., to predict the heat transfer in the solid subjected to a thermal process, to monitor surface composition or morphology, or to detect invisible subsurface defects like delaminations. This measurement can be done in a noncontact manner using various photothermal methods. Such methods typically involve pulsed heating of the surface by small amounts using a laser source; the decay of the surface temperature after this pulsed photothermal heating is then probed to provide the thermal diffusivity. Various probing methods have been developed in the literature, including the probing of reflection, refraction, and diffraction from the pulsed heated area, infrared thermal radiometry, and surface deformation. This paper provides an overview of such techniques and some examples of their applications.     

提高热采注汽系统热效率的研究

为了降低热采成本和提高经济效益 ,建立了热采注汽系统热效率的数学模型。根据实测数据计算了 9个注汽系统的热效率。提出了改进注汽系统热效率的行之有效的措施。根据排烟的氧含量的大小 ,可以确定注汽锅炉热效率改进程度 ;按管线允许热损失量和保温材料种类 ,设计保温层厚度 ,可大大提高输汽管线热效率。仅此两项 ,即可使大部分注汽系统热效率提高 7%以上 ,井底蒸汽干度提高 10 %以上。     

火电机组运行优化系统的现状与展望

简单回顾了国内外在火电机组运行优化领域的研究历程，列举了目前国内外市场上针对火电机组的各种主流运行优化产品的功能特点和应用情况，分析了国外引进产品和国内自主研发产品在中国当前市场环境下各自的优势和劣势。介绍了当前运行优化系统在国内电站机组的应用现状，阐述了国内外运行优化系统在实际应用中存在的问题，并提出了相应的改进意见。对机组运行优化系统的未来发展进行了展望，指出机组运行优化系统将利用先进技术设备和信息平台，与电站管理紧密结合，在日益规范的市场中不断发展完善，为提高电站经济性发挥更大的作用。     

稠油井注汽系统的热效率分析

建立了热采注汽系统热效率的计算模型。根据XX油田数据计算了2个注汽系统的热效率。提出了提高注汽系统热效率的三项措施：（1）降低锅炉的过剩空气系数；（2）按最大允许热损失设计地面输汽管线的保温层厚度；（3）使用视导热系数小的隔热油管，按箍增加隔热结构，防止热封隔器的泄漏等。