Dynamic stability of modified strain gradient theory sinusoidal viscoelastic piezoelectric polymeric functionally graded single-walled carbon nanotubes reinforced nanocomposite plate considering surface stress and agglomeration effects under hydro-thermo-electro-magneto-mechanical loadings

In this article, dynamic stability analysis of the viscoelastic piezoelectric polymeric nanocomposite plate reinforced by functionally graded single-walled carbon nanotubes (FG-SWCNTs) based on modified strain gradient theory (MSGT) is explored. The viscoelastic piezoelectric polymeric nanocomposite plate reinforced is subjected to hydrothermal and electro-magneto-mechanical loadings. The viscoelastic piezoelectric polymeric nanocomposite plate is rested on viscoelastic foundation. Uniform distribution (UD), various functionally graded (FG) distribution types such as FG-V, FG-X, and FG-O are considered for single-walled carbon nanotubes (SWCNTs). The extended mixture approach is applied to estimation of the elastic properties. The equations of motion are derived by Hamilton's principle. The resonance frequency or the parametric resonance is obtained then dynamic stability region is specified. There is a good agreement between the present work and the literature result. Various parametric investigations are performed for the influences of the small scale parameters, direct and alternating applied voltage, magnetic field, viscoelastic foundation coefficients, and aspect ratios on the dynamic stability region of the viscoelastic piezoelectric polymeric nanocomposite plate. The results indicated that SWCNT agglomeration and surface stress have significant effects on the dynamic stability region and the parametric resonance. Dynamic stability region increases with increasing of thickness to width ratio, magnetic field, applied voltage, static load factor, viscoelastic foundation parameters, and surface density constant, and decreasing of length to width ratio and residual surface stress constant. Also, the dynamic stability region shifts to lower parameter resonance with increasing of temperature and moisture changes. The results can be employed for design of micro-electro-mechanical systems and nano-electro-mechanical systems.     

MgO/Pd底层对CoSiB/Pd多层膜垂直磁各向异性及热稳定性的影响EI北大核心CSCD

采用磁控溅射方法在玻璃基片上制备以MgO/Pd为底层的CoSiB/Pd多层膜样品,研究MgO底层厚度t对CoSiB/Pd多层膜垂直磁各向异性(perpendicular magnetic anisotropy,PMA)的影响,分析具有MgO/Pd底层的多层膜的热稳定性。通过对样品的反常霍尔效应的测试分析发现,底层中引入MgO层能够提高其PMA性能,当t为3.5 nm时,样品的矩形度最好。对最佳样品MgO(3.5 nm)/Pd(3 nm)/[CoSiB(0.5 nm)/Pd(0.8 nm)]2/Ta(2 nm)的磁滞回线进行测试,其有效磁各向异性常数K eff达到2.0×10^5 J/m^3。热稳定性分析发现,当退火温度为200℃时,样品的K eff达到最大值2.6×10^5 J/m^3;当退火温度达到400℃时,样品仍能保持良好的PMA性能。     

城市高架复合道路交通噪声垂直面声场研究

采用Cadna/A 软件研究高架复合路在不同路况条件下交通噪声垂直面声场的分布规律和建设高架路声屏障的降噪规律。高架桥使高架复合道路垂直面声场发生较大变化,由此需要研究高架桥对不同路况交通噪声垂直面声场分布的影响规律。国内在高架路上建设大量声屏障,但在很多情况下,这种声屏障的降噪效果并不理想。为了研究产生这种现象的原因,计算并分析不同路况下建设高架路声屏障的降噪效果,提出可以根据不同路况来决定是否应建造声屏障,以避免建造无效声屏障造成的浪费。     

桩基非线性轴向受迫振动稳态幅频响应分析

用多时间尺度法得到了一端固定、另一端自由的桩基非线性轴向受迫振动系统主共振时的稳态幅频响应曲线。研究表明:桩基非线性轴向受迫振动的幅频响应曲线不仅与派生线性振动系统的固有频率、土刚度和阻尼系数有关,而且也与振幅、相位和非线性特征量有关。幅频响应曲线中会出现一种典型的振幅跳跃的非线性现象,当激励频率接近线性系统固有频率时,系统产生共振从而响应幅值增大,而且同一激励频率可能会对应于振幅的多个不同值,运动状态具有不稳定性。随着非线性系数的增大,响应曲线峰值侧向弯曲;粘性阻尼会抑制响应振幅的增大;激励振幅增大会导致响应振幅增大。     

Organic Ferroelectric‐Based 1T1T Random Access Memory Cell Employing a Common Dielectric Layer Overcoming the Half‐Selection Problem

Organic electronics based on poly(vinylidenefluoride/trifluoroethylene) (P(VDF‐TrFE)) dielectric is facing great challenges in flexible circuits. As one indispensable part of integrated circuits, there is an urgent demand for low‐cost and easy‐fabrication nonvolatile memory devices. A breakthrough is made on a novel ferroelectric random access memory cell (1T1T FeRAM cell) consisting of one selection transistor and one ferroelectric memory transistor in order to overcome the half‐selection problem. Unlike complicated manufacturing using multiple dielectrics, this system simplifies 1T1T FeRAM cell fabrication using one common dielectric. To achieve this goal, a strategy for semiconductor/insulator (S/I) interface modulation is put forward and applied to nonhysteretic selection transistors with high performances for driving or addressing purposes. As a result, high hole mobility of 3.81 cm² V^?1 s^?1 (average) for 2,6‐diphenylanthracene (DPA) and electron mobility of 0.124 cm² V^?1 s^?1 (average) for N ,N ′‐1H,1H‐perfluorobutyl dicyanoperylenecarboxydiimide (PDI‐FCN₂) are obtained in selection transistors. In this work, we demonstrate this technology's potential for organic ferroelectric‐based pixelated memory module fabrication.     

基于DIC和热电偶实现高聚物力热响应特性研究

利用非接触式、高精度和全场实时观测的三维数字散斑动态变形测量分析方法,结合热电偶实现高聚物材料在单轴准静态实验中变形和表面温度变化的同步测量,并获得超高分子量聚乙烯(UHMWPE)和聚碳酸酯(PC)在准静态实验中的应变场和表面温度场.实验结果表明:高聚物表面在变形开始阶段会出现短暂的降温现象,或由于试件体积的膨胀,随着变形增大,应变率增大,温度升高,温升速率也随之增大,表面温度在实验结束后达到最大值,表现为大量放热现象,最终温度下降逐渐趋于稳定;在准静态实验中UHMWPE和PC具有一定的应变率敏感性,弹性模量和拉伸强度随应变率的增大而增大;且UHMWPE的压缩性能明显强于其拉伸性能.     

磁制冷材料的研究进展

本文简述了磁制冷的基本原理,分析磁制冷工质的熵特性,总结了近几年磁制冷材料的最新进展,对磁制冷材料未来的发展进行了展望。     

炸药小药卷性能的初步研究

试验得出了几种炸药在不同药卷直径下的性能结果，并２锥形装药测定了炸药的熄爆直径。论文安泡乳化炸药的小药卷最适用于煤矿井下岩巷掘进的全断面爆破作业。     

纳米陶瓷刀具材料的力学性能研究

纳米复相陶瓷刀具材料的研究成功有望从根本上解决陶瓷材料的脆性问题,比传统陶瓷刀具材料,它具有更高的抗弯强度、断裂韧度等力学性能。介绍纳米复相陶瓷的增韧补强机理,对研制高性能纳米陶瓷刀具材料需考虑的主要因素进行了探讨。     

钢筋混凝土纤维梁柱单元实用模拟平台

为精细化模拟钢筋混凝土结构的非线性滞回性能,建立了钢筋混凝土纤维梁柱单元的一种实用模拟平台FENAP,开发了相应的具有钢和混凝土多种单轴本构模型的材料库.FENAP平台可考虑构件刚度和强度退化等损伤效应、轴力和弯矩的多维耦合效应以及箍筋对混凝土的约束效应.分别运用FENAP平台和OpenSees软件模拟了圆形钢墩柱和矩...