Analytic computation of the photocurrent density in a n-6H-SiC/p-Si/n-Si/p-Si0.8Ge0.2 multilayer solar cell

In this work we conceived a model of a multilayer solar cell composed by four layers of opposite conductivities: an n-type 6H-SiC used as a frontal layer to absorb high energy photons (energy gap equals 2.9 eV), a p-type Si layer, an n-type Si layer and a p-type SiGe back layer to absorb low energy photons (Si_0.8Ge_0.2 with an energy gap equal to 0.8 eV). The impurity concentration in every layer of the model is taken equal to 10¹⁷ cm⁻³ to ensure abrupt junctions inside the cell. The optical properties of the separate layers have been fitted and tabulated to be used for thin films devices numerical simulation. We developed the equations giving the minority carrier concentration and the photocurrent density in each abscissa of the model. We used Matlab software to simulate and optimize the layers thicknesses to achieve the maximum photocurrent generated under AM0 solar spectrum. The results of simulation showed that the optimized structure could deliver, assuming 10⁵ cm/s surface recombination velocity, a photocurrent density of more than 53 mA/cm², which represents 88.3% of the ideal photocurrent (59.99 mA/cm²) that can be generated under AM0 solar spectrum.     

Cover Picture: Light‐Emitting Organic Solar Cells Based on a 3D Conjugated System with Internal Charge Transfer (Adv. Mater. 22/2006)

The cover image illustrates the dual photovoltaic and electroluminescence function of a single‐layer device based on a thienylenevinylene–triphenylamine with internal charge transfer (ICT), as reported by Cravino, Roncali, and co‐workers on p. 3033. The material forms an organic glass with isotropic electronic properties while ICT leads simultaneously to an extension of the photoresponse to the red and to an increase of the open circuit voltage. The use of an additional layer of C₆₀ further improves the photovoltaic. Images of the sun and moon courtesy NASA/JPL–Caltech.     

小剂量辐照小鼠胸腺细胞膜流动性的变化

报道了以茈为荧光探针,探讨小剂量~(60)Co γ射线照射后小鼠胸腺细胞膜流动性的变化。结果表明,剂量在0.25-1.00Gy范围,胸腺细胞膜流动性降低与剂量之间呈明显线性关系。从0.50Gy起,辐照组荧光强度比值I_1/I_2与I_3/I_2与对照组的比较存有显著差异(P<0.05)。提示淋巴细胞膜流动性的变化可作为小剂量辐照早期效应的敏感指标。     

浅论太阳电池在通信工程中的应用

介绍了太阳电池应用的一般要求和太阳能供电系统的组成及运行，给出了工程设计个常用的太阳电池容量计算方法，并提出太阳能供电系统运行维护注意事项。     

An Electron Spin Resonance Study of Evolution of Organic Free Radicals in Irradiated Pepper During Heat Treatment

ABSTRACT: The thermal evolution behavior of the organic free radicals induced in irradiated black pepper was studied by electron spin resonance spectroscopy. To analyze the time-dependent evolution process, we used the theory of transient phenomena, that is, an ordinal differential equation, as well as the nonlinear least squares numerical method. We found that the radical evolution that occurred in the irradiated pepper obeys a single exponential function and yields a unique time constant. The evolution of the organic free radical undergoes a simple reaction process of a single radical species.     

太阳电池板结构应力-应变状态分析

多层胶接是太阳电池板的结构特点,由于不同材料的弹性模量、热膨胀系数和泊松比不同,在温度场 作用下会产生热应力应变,在多次热交变过程中热应力．应变累积最后导致结构层间剥离,因此研究温度场作用 下太阳电池板结构应力应变状态具有非常重要的实际意义。本文推导了模拟太阳电池板结构应力-应变状态的一 维模型,该模型同样适用于分析多层胶接结构应力应变状态。     

Diffusion and influence of Cu on properties of CdTe thin films and CdTe/CdS cells

The effective diffusion coefficients of Cu for thermal and photodiffusion in the CdTe films have been estimated from resistivity versus duration of thermal or photoannealing curves. In the temperature range 60–200°C the effective coefficient of thermal diffusion (D_t) and photodiffusion (D_ph) are described as D_t=7.3×10⁻⁷exp(−0.33/kT) and D_ph=4.7×10⁻⁸exp(−0.20/kT).It is found that the diffusion doping of CdTe thin films by Cu at 400°C results in a sharp decrease of resistivity up to 7 orders of magnitude of p-type material, depending on thickness of Cu film. The comparative study of performance of CdTe(Cu)/CdS and CdTe/CdS cells has been studied. It is shown that the diffusion doping of CdTe film by Cu increases efficiency of CdTe(Cu)/CdS cells from 0.9% to 6.8%. The degradation of photovoltaic parameters of CdTe(Cu)/CdS cell, during testing under forward and reverse bias at room temperature, proceeds at a larger rate than those of CdTe/CdS cell without Cu. The degradation of performance of CdTe(Cu)/CdS cells is tentatively assigned to electrodiffusion of Cu in CdTe, resulting in redistribution of concentration of Cu-related centers in CdTe film and heterojunction region.     

液晶分子附着能和盒间隙对响应时间的影响

通过理论分析和实验研究液晶分子附着能和液晶盒间隙对响应时间(τ0)的影响。用液晶盒有效间隙法和表面动力学方程法两种方法推出分析公式,由这两种方法推出的结果是一致的。实验数据与简化方程τ0-dx基本拟合(其中d是液晶盒的间隙,x是指数)。在两种极端的(极大或极小)附着能极限下,指数x分别接近2和1。这个结论有助于优化液晶显示器件的应用。