基于射频隐身的相控阵雷达搜索控制参量优化设计

机载雷达射频隐身技术对提高飞行器生存能力具有重要意义。 本文研究了机载相控阵雷达基于射频隐身的搜索控制参量优化设计。通过分析截获概率原理 ,给出了目标特征和雷达系统性能对驻留时间和波位间隔等搜索控制参量的影响关系,构建 了目标探测性能与隐身性能约束下的优化模型。仿真获得了满足隐身要求下相控阵雷达的最 优搜索控制参数。     

Self-aligned fabrication of single crystal diamond gated field emitter array

This paper describes a self-aligned fabrication process for diamond gated field emitter array (FEA). Utilizing the non-conformal coverage sputtering conditions of silicon oxide, an interesting “sphere on cone” structure is formed on diamond nano tip array, which is the key point of gate hole opening process. This structure causes shadowing at certain regions of side-wall during Ti / Au gate metal deposition. Removal of “sphere” by wet etching leads to the successful fabrication of a single crystalline diamond gated FEA. Scanning electron microscope observations reveal the fabrication of a uniform emitter array with tip radius of curvature (20 nm) and gate hole (1.4 μm). We also confirmed that no noticeable physical damage exists on tip. In field emission characteristics of the fabricated single crystal diamond gated FEA, gate voltage control of field emission current is realized.     

Pattern synthesis of time‐modulated conformal arrays by an improved differential evolution algorithm

In this article, an improved differential evolution algorithm (IDE) based on two different colonies is proposed and applied to time‐modulated conformal arrays syntheses. The whole population of IDE is divided into two parts. The one part searches the solution globally while the other searches the neighborhood of the solution provided by the previous one. Benchmark functions are provided to testify IDE. Furthermore, IDE is applied to synthetize sum‐difference patterns with a 1 × 16 elements time‐modulated circular array and low sidelobe level (SLL) patterns with an 8 × 12 elements time‐modulated cone array. After optimization, the sideband level (SBL) of the circular array at the first sideband frequency is ?1.00 dB. The SLL and SBL at the first sideband frequency of the cone array are lower than ?30.00 and ?20.00 dB, respectively. Experiment results verify the superior performance of IDE. Moreover, to accelerate the computation speed, graphics processing unit parallel computing technique is introduced into pattern synthesis and the acceleration ratios of more than 23 times can be achieved. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:697–705, 2014.     

Synthesis of antenna arrays with an efficient multiobjective differential evolution algorithm

An efficient multiobjective differential evolution algorithm for array synthesis is proposed in this article. By introducing novel strategies in the generalized differential evolution (GDE3), the proposed algorithm can generate a better converged and distributed Pareto front than the standard GDE3. Five typical benchmark functions are optimized by the proposed improved GDE3 (IGDE) to verify its effectiveness. Furthermore, the proposed algorithm is applied in two‐pattern synthesis problems, including an unequal spaced linear array and a conformal array. The superior performance of the proposed IGDE demonstrates that it is an efficient and competitive algorithm in the function optimization, pattern synthesis, and other electromagnetic problems. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:161–169, 2014.     

Preparation of phenolic resin derived 3-D ordered macroporous carbon

Three-dimensionally ordered long-range macroporous carbon structures were prepared using commercially available phenolic resin by utilizing sacrificial colloidal silica crystalline arrays as templates that were subsequently removed by HF etching after pyrolysis in an argon atmosphere. SEM, TEM, and BET were employed to characterize the morphology and the surface area of the porous carbon structures. The pore size (150–1000 nm) and BET surface area, which reflect pore volume (298.6 m²/g (1.32 cm³/g) ∼ 93.7 m²/g (0.12 cm³/g)), of the macroporous carbon structures produced were approximately proportional to the size (150–1000 nm) of the sacrificial silica sphere templates used (annealing temp. 550°C). The achieved 550 nm porous carbon structures were examined to function as potential catalyst carriers and were successfully impregnated with Ag or Pt-Ru on their inner walls after borohydride reduction at room temperature. In addition, porous carbon patterns were fabricated using the ‘micromolding in capillary’ technique, which has potential applications in the microreaction technology.     

局部表面改性紫铜方柱阵列池沸腾传热特性和机理

以局部表面改性的紫铜直方柱和梯度方柱阵列为研究对象，实验研究了表面润湿性、表面形貌和表面活性剂对池沸腾换热性能和气泡生长特性的影响。实验工质为去离子水，浓度分别为100、200、400、800 mg·L^-1的异丙醇溶液和正庚醇溶液。实验结果表明：方柱阵列表面镀银之后润湿性变差，表面产生的气泡数量减少。向去离子水中添加异丙醇或正庚醇后，在热通量为66.1～202 kW·m^-2时，气泡脱离直径变小、数目减少，而当热通量增至413 kW·m^-2时，活性剂能够有效阻碍气泡合并，故池沸腾传热系数随着浓度增加先减小后增大。上下层宽分别0.5 mm和1 mm、间距为2 mm的梯度方柱阵列结构有助于气泡的合并，但由于促进了固体表面气膜的形成，从而降低了沸腾换热性能。     

纳米ZnO传感阵列对多组份气体的智能识别

采用物理热蒸发法制备纯ZnO纳米线及Al,Ag,Ni掺杂的ZnO纳米线.以纯ZnO纳米线及Al,Ag,Ni掺杂的ZnO纳米线为基料分别制成气敏传感器;利用气体敏感的差异性,构建纳米ZnO基气敏传感器阵列,结合BP人工神经网络来实现纳米ZnO基气敏元件对目标混合气体组分和相对浓度的识别.结果表明:将传感器阵列输出灵敏度值进行处理后,输入BP神经网络完成训练,能够准确识别混合气体(CO,H2,CH4)的组分与相对浓度。     

基于SIMD PE阵列的图像同态滤波并行算法

为了满足G级像素帧实时处理的要求,提出图像同态滤波的数据并行实现方法.讨论了图像帧和滤波器在SIMD PE阵列中的预置及数据并行的滤波处理实现方法,其处理方式规则性强、并行度高,提高了处理速度.由于SIMD PE阵列具有可裁减性,可以适合不同规模图像帧的处理需求,满足不同的嵌入式应用环境.     

TD-SCDMA系统下行波束赋形技术研究

TD-SCDMA系统最重要的技术特征是智能天线技术,智能天线技术的核心是下行波束赋形。综合考虑了干扰和噪声对移动台的影响,模拟了在不同信道环境下的基于最小均方误差准则的理想波束赋形算法及其实现方法,并对算法进行了性能仿真,分析结论并说明系统性能的改善。     

运用硬件提高计算全息运算速度综述

计算全息技术的快速发展使得全息电视、全息电影成为可能.许多研究者正在致力于开发的电子全息三维显示系统的最关键的技术之一就是提高计算全息技术的运算速度.由于计算全息技术所需要的计算量很大,使用一般计算机无法以帧频速率实现全息图的计算,因此研究者们在提高全息图的计算速度方面进行了大量的研究工作.在主要调查研究使用硬件加速的方法来提高全息图计算速度的基础上,论述了其研究现状以及未来的发展动态.