一种将DVD高清素材应用到PPT中的无损转换方法

文中给出了一种DVD高清素材到PPT的无损转换方法,该方法具有转换速度快、素材清晰度高、PPT播放方式灵活等优点。     

以太网中双绞线超长布线的论证和实践

在IEEE802．3系列标准以太网的布线中,五类双绞线的长度限制在100米内,当距离超长时,会造成网络故障。为了解决这个问题,本文主要分析CSMA／CD和双绞线的性能,对超出传输长度的限制进行分析。最后还通过实测证明在一定环境距离内,超长使用廉价双绞线替代高成本光缆设备的可行性。     

An LMI approach to synthesis subject to almost asymptotic regulation constraints

A multi-objective controller synthesis problem is considered in which an output is to be regulated approximately by assuring a bound on the steady-state peak amplification in response to an infinite-energy disturbance, while also guaranteeing a desired level of performance measured in terms of the worst-case energy gain from a finite-energy input to a performance output. Relying on a characterization of the controllers with which almost asymptotic regulation is accomplished, the problem of guaranteeing the desired level of performance is reduced to solving a system of linear matrix inequalities subject to a set of linear equality constraints. Based on the solution of this system, a procedure is outlined for the construction of a suitable controller whose order is equal to the order of the plant plus the order of the exogenous system.     

control with limited communication and message losses

We propose an H^∞ approach to a remote control problem where the communication is constrained due to the use of a shared channel. The controller employs a periodic time sequencing scheme for message transmissions from multiple sensors and to multiple actuators of the system. It further takes into account the information on the random message losses that occur in the channel. An exact characterization for controller synthesis is obtained and is stated in terms of linear matrix inequalities. Furthermore, an analysis on the loss probabilities of the messages to accomplish stabilization is carried out. The results are illustrated through a numerical example.     

数字校园PKI／CA认证体系的规划和建设

文章首先简单分析了PKI／CA认证技术;接着分析了PKI／CA目前主流的三种建设模式,并结合校园的实际情况,提出了校园PKI／CA采用完全自建的模式,并采用层次信用体系结构,给出了具体的结构模型。最后对校园PKI／CA认证体系建设中会遇到的主要问题进行了简要分析。     

基于TMS320F2812 DSP的Focus控制器设计

借用原有DVD-ROM的机械机构、驱动单元、光学单元,以TMS320F2812 DSP芯片为核心控制器,搭建了DVD的Focus控制实验平台;分别从硬件和软件两方面进行设计,从而对前期采用PID算法设计的Focus控制器进行了可行性验证。     

海明码在视频水印中的应用

通过分析海明码的实现原理,设计一个基于海明码的视频7K印模型,并对诙模型进行程序验证。实验结果表明：基于海明码的视频水印方案能够有效提高7R印的可恢复性、顽健性、可升级性、适用性,但对视频面质有一定的影响。     

超声波测距在汽车停车泊位中的应用

本系统的硬件基于ARM7,软件基于μC／OS—Ⅱ实时多任务操作系统。本文介绍了以ARM7为控制核心的超声波汽车停车泊位检测报警系统,重点分析了超声波测距的原理、超声波收发器与ARM7的连接与实现以及系统的软件流程设计。该系统在汽车电子方面有一定的实用价值。     

基于DEVS/CD++的抢险救灾物资保障仿真建模研究

突发自然灾害条件下的抢险救灾行动是典型的离散事件系统,在分析离散事件系统规范(DEVS)模型描述的基础上,构建了抢险救灾物资保障DEVS仿真模型,分析了仿真实体,设计了仿真流程,给出了耦合模型和主要原子模型结构。并在CD++中对该模型进行了仿真试验,得到了较为合理的仿真结果,为开展抢险救灾应急保障模拟训练奠定了基础。     

On mesh restrictions to satisfy comparison principles,maximum principles,and the non-negative constraint: Recent developments and new results

This article concerns mesh restrictions that are needed to satisfy several important mathematical properties—maximum principles, comparison principles, and the nonnegative constraint—for a general linear second-order elliptic partial differential equation. We critically review some recent developments in the field of discrete maximum principles, derive new results, and discuss some possible future research directions in this area. In particular, we derive restrictions for a three-node triangular (T3) element and a four-node quadrilateral (Q4) element to satisfy comparison principles, maximum principles, and the nonnegative constraint under the standard single-field Galerkin formulation. Analysis is restricted to uniformly elliptic linear differential operators in divergence form with Dirichlet boundary conditions specified on the entire boundary of the domain. Various versions of maximum principles and comparison principles are discussed in both continuous and discrete settings. In the literature, it is well-known that an acute-angled triangle is sufficient to satisfy the discrete weak maximum principle for pure isotropic diffusion. Herein, we show that this condition can be either too restrictive or not sufficient to satisfy various discrete principles when one considers anisotropic diffusivity, advection velocity field, or linear reaction coefficient. Subsequently, we derive appropriate restrictions on the mesh for simplicial (e.g., T3 element) and nonsimplicial (e.g., Q4 element) elements. Based on these conditions, an iterative algorithm is developed to construct simplicial meshes that preserve discrete maximum principles using existing open source mesh generators. Various numerical examples based on different types of triangulations are presented to show the pros and cons of placing restrictions on a computational mesh. We also quantify local and global mass conservation errors using representative numerical examples and illustrate the performance of metric.