Influence of a Jump in the Power of Laser Radiation on Its Measurement

Simulation and investigation of the effect of an isolated jump on realization of the unit of power of laser radiation and dissemination of the size of the unit are considered. Results are obtained by means of a newly developed algorithm that characterizes the behavior of the mean value of a signal and the standard deviation of a system as functions of the parameters of a jump in the power of laser radiation and the length and amplitude of the jump. If information concerning the time when a jump occurs is available, the proposed algorithm makes it possible to take into account how a jump affects the ultimate result of a measurement.     

电荷耦合图像传感器在细线直径测控系统中的应用

文中给出了一个以氟化氪固体激光器做光源，以电荷耦合图像传感器为光屏，应用夫朗禾费衍射原理，实现对细丝直径在线检测自动控制。该方案对相关企业质量控制的自动化是有意义的。     

YAG：Nd激光照射犬气管粘膜的实验研究

An experimental study for the pathologic changes of the canine tracheal mucosa under YAG:Nd laser ablation was performed in order to master the appropriate parameters for the clinical treatment of YAG:Nd laser. 6 male and female Mongolia dogs weighing 13-18 kg were received 20W YAG:Nd laser treatment and their pathologic changes were examined instantly and 3, 7, 14 and 28 days after ablation.     

高功率固体激光器

本文详细讨论了设计高平均功率固体激光器的有关问题,包括激光材料性质、棒状和板条状几何结构,聚光器和光学谐振腔等。分析表明,板条状几何结构固体激光器提供了达到千瓦级功率水平同时又保持良好光束质量的可能性。     

自成像列阵共振腔的分析——Ⅰ.Talbot共振腔

利用自成像效应进行半导体列阵激光器锁相是一种重要的外腔锁相技术,所构成的共振腔可分为Talbot腔和带相位补偿板的Lau腔。我们用Fox-Li方法计算了共振模式。本文给出了Talbot腔的计算结果和分析,表明同相和反相模的损耗随腔长变化存在临界点。     

铸造铝合金(ZL109)激光表面处理

采用功率为2kW级CO_2连续可调式横流激光光源,对不同涂层的ZL109试样表面进行了激光熔凝的实验研究。     

激光对生产β-胡萝卜素的藻种——盐生杜氏藻(Dunaliella salina)诱变的研究

用激光(335nm,0.014MW/mm~2)对产生6-胡萝卜素的盐生杜氏藻(Dunaliella Salina)进行了诱变研究,藻的存活率为90％。诱导后筛选到三个盐生杜氏藻的品系。生长速度较原藻最高增加20％,长度增加7.5％,萨-胡萝卜素生产能力为0.48mg·100ml~(-1)天~-1),比原藻增加19％。     

四倍频Nd：YAG激光在高压氢气中的喇曼频移研究

利用Nd:YAG固体激光器四倍频输出(266nm)在高压H₂中的受激喇曼散射获得多波长的激光输出。当泵浦能量一定时,通过改变H₂压力得到了最佳的能量输出,299nm波长的激光能量为3mJ,341nm波长的激光能量输出为6.1mJ,398nm波长的激光能量输出为2.8mJ,239nm波长的激光能量输出为0.8mJ,同时在477nm,595nm,218nm,200nm波段也有能量输出。     

红外半导体激光光镊的实验研究

激光光镊技术是一项在许多科学领域有广阔应用前景的技术。本文详细给出构建一台红外半导体激光光镊的设计思想及实例。由于采用了独特的对大功率多模红外激光选模整形和双透镜陷阱操纵技术等性能价格最优化选择 ,该系统易于构建 ,陷阱操作方便 ,其构建价格仅一般光镊的几十分之一 ,非常适合光镊技术的推广和一般实验室构建     

Filler-induced failure mechanism in plastic-encapsulated microelectronic packages

Based on empirical data, the present work provides a model to prevent filler-induced reliability degradation in plastic-encapsulated LOC (lead-on-chip) packages. According to the model, the maximum size of the silica fillers included in the plastic package body should be smaller than one half of the inter-distance between the device and its overlying lead-frame. In particular, it is shown in the model that the spherical silica particles, which are sometimes trapped in the space between the top surface of the device and the bottom of the lead-frame during the encapsulating process, can induce huge compressive stress on a specific site of the integrated circuit pattern due to the thermal shrinkage of the plastic package body. Further, the present model suggests that tiny fillers squeezed beneath a large trapping filler might directly attack the brittle layer of the device pattern because the compressive force from the large filler particle can develop into huge compressive stress due to the reduced load-carrying area.