AOI技术在激光微孔产品检查中的应用

在过去几年里,小型PCB诸如硅芯片级以及便携式移动电话的生产者和设计者们已经发现:如果要保持自己的竞争力并具备生产高密度封装板能力,就必须采用微孔技术。微孔技术的出现要求针对微孔缺陷的有效检测手段对工艺进行过程控制。本文对激光微孔的自动光学检测进行了详细介绍。     

Metal oxide photoelectrodes for hydrogen generation using solar radiation-driven water splitting

Metal oxide semiconductors are today the most promising materials for photoelectrochemical production of hydrogen by the method of the photoelectrolysis of water as the problems of the stability of photoelectrodes are basically solved only for such materials. The aim of this short review paper is the presentation of results in this field obtained both worldwide and by the authors of this paper. The factors determining the efficiency of photoelectrolysis and possible ways to increase the photocatalytic activity of semiconductor photoelectrodes are analyzed. It is shown that the development of new photoelectrodes made of solid solutions and more complicated multicomponent compositions are most promising. Possibilities to use porous and nanocrystalline oxide photoelectrodes in photoelectrochemistry are also discussed. Photoelectrolysis setups for the photoelectrochemical conversion of solar energy into hydrogen are briefly described.     

Influence of the deposition atmosphere on the characteristics of Pd–Mg thin films prepared by pulsed laser deposition

Bilayered palladium (30 nm thick)–magnesium (350 nm thick) thin films were prepared using the pulsed laser deposition technique in the presence of various background gases (Ar, He and a mixture He + H₂) under different partial pressures (47 and 27 Pa). According to the deposition atmosphere, the Pd/Mg interface shows either a sharp or an extended transition. The electrochemical hydriding properties and the mechanical stability upon cycling of the Pd/Mg film are greatly improved when an extended «intermixing» zone between the Pd and Mg layers is present. The Pd–Mg films prepared under pure helium fulfill these conditions.     

Laser irradiation of oligosiloxane copolymer thin films functionalized with side chain bulky carbosilane moieties

Linear oligosiloxanes functionalized with bulky side chain tris(trimethylsilyl)hexyl (TTSH) substituents were transformed into cross-linked materials by UV 193 nm excimer pulsed laser ablation. The process occurred without any catalyst, by reactions of radicals formed in UV laser induced photolysis of side tris(trimethylsilyl)hexyl groups. Chemical changes were monitored by FTIR, LC/UV, GC/MS and solubility tests.     

短脉冲激光与岩石相互作用机理初探

石油开采过程中，为增大原始岩体的渗流速度，一般采用水压致裂或射孔弹的方法来加以实现，但两种方法都存在一定缺陷。为探索一种新概念石油开采技术，即采用激光技术增大原始岩体的渗透率，对短脉冲激光辐照自然、饱水和饱油状态的花岗岩、大理岩和红砂岩的响应作了初步研究。得到了激光辐照下，岩石试样内烧蚀坑的三维形态以及烧蚀状态与脉冲数的初步关系。结果表明：脉冲激光可以在试样局部产生一定的裂纹；饱油试样的烧蚀情况较饱水和自然状态更严重。但对于产生的裂纹数量，尺寸以及方向等方面的控制尚需进一步的工作。     

激光角膜矫正术中所用激光波长的选择

用分光光度计测定了12例兔角膜和1例人角膜的吸收光谱,结果表明波长小于300nm的准分子激光和波长在1.88μm～2.64μm,2.36μm～40μm的激光,均可对角膜进行切割并可望用于激光角膜矫正术。     

激光束偏转法检测金属表面层的缺陷

本文编程计算了由激光光热应产业的金属表面的温度分布和泵浦光的调制频率、金属层厚度等的关系，预言检测浓度缺陷的能力。用激光光束偏转法检测到表面下不同深处的缺陷，并把面扫描幅值信号以三维象和灰度象显示。     

T(x) phase diagram of the Cu2Se-Al2Se3 system

Twenty alloys of various compositions in the Cu₂Se-Al₂Se₃ system were prepared and investigated. The T(x) phase diagram of the Cu₂Se-Al₂Se₃ system was obtained from x-ray diffraction, differential thermal analysis, and microstructure investigation for the first time. The homogeneity region of the CuAlSe₂ semiconducting compound was established. Previous articles by this author were presented with the spelling of his name as B.V. Korzun.     

铸铝激光熔融处理后的组织与性能

应用光学和电子显微镜及显微硬度计研究了铸造Al-Si合金经激光表面熔融处理后的组织和性能。指出,组织分熔化区、过度区和基体三层。在熔化区中树枝状先共晶α相的平均宽度由原始组织的20～40μm细化到2～3μm,同时共晶组织也被大大细化。这些变化使显微硬度值由67.4提高至109～115.     

自聚焦光纤对半导体激光束的准直研究

介绍了一种新颖的利用自聚焦光纤对半导体激光束的准直技术。该方法结构简单、调整方便。实验研究表明其可使大发散角的半导体激光束压缩到0.01º的数量级,适合作半导体激光器的准直元件而运用于精密测试领域。