基于浏览器 /服务器的橡胶加工网络测控系统

通过对客户机／服务器模式和浏览器／服务器模式的比较，选择浏览器／服务器模式组建了基于Internt/Intranet的远程橡胶加工网络测控系统，并介绍了系统的开发模式、方法和注意事项。     

Molecular dynamics model structures for the molten globule state of {alpha}-lactalbumin: aromatic residue clusters I and II

To model the molten globule structure of -lactalbumin, moleculardynamics (MD) simulations were carried out for the protein inexplicit water at high temperature. In these simulations, long-rangeCoulomb interactions were evaluated explicitly with an originalmethod (particle–particle and particle–cell: PPPC)to avoid artifacts caused by the cut-off. The MD simulationswere started from two initial conditions to verify that similarresults would be obtained. From the last 150 ps trajectoriesof the two MD simulations, two partially unfolded average structureswere obtained. These structures had the following common structuralfeatures which are characteristic of the molten globule state.The radii of gyration for these conformations were 7.4 and 9.6%larger than that of the native state. These values were almostthe same as the experimental value (9.6%) observed recentlyby small-angle X-ray scattering (Kataoka,M., Kuwajima,K., Tokunaga,F.and Goto,Y., 1997, Protein Sci., 6, 422–430). Furthermore,aromatic residues of clusters I and II in these structures werefar apart from each other except for Try103–Trp104. Thisresult is in good agreement with NMR experimental results forthe acid-denatured molten globule state (Alexandrescu et al.,1992, 1993); that is, NOE signals between the aromatic residueswere not observed, except for that of Try103–Trp104 inthe molten globule state. Other structural features of thesemodels for the molten globule state are discussed with referenceto native state structures.     

Effects of prior knowledge on learning from different compositions of representations in a mobile learning environment

Two experiments examined the effects of prior knowledge on learning from different compositions of multiple representations in a mobile learning environment on plant leaf morphology for primary school students. Experiment 1 compared the learning effects of a mobile learning environment presenting text and photos of plants on a tablet PC, either in combination with or without real plants in the physical environment. Results indicated that there were no interactions between prior knowledge and experimental condition. Students who learned with tablet PCs only outperformed students who additionally learned with real plants on a comprehension and an application test. In addition, high prior knowledge students outperformed low prior knowledge students on both tests. To investigate whether these effects were caused by the specific characteristics of the combination of photos of real plants and real plants, Experiment 2 compared the differential effects of prior knowledge on learning with the combination of texts, photos and real plants to a combination in which the photos were replaced by schematic hand drawings. Results indicated that both low and high prior knowledge students, who learned with the combination of texts, schematic hand drawings and real plants performed better on a comprehension and an application test. High prior knowledge students performed better on both tests. It is concluded that the number and type of representations used is critical for the effectiveness of mobile learning environments.     

有机改性蒙脱土／木粉／PVC复合材料的阻燃性研究

将有机改性蒙脱土（OMMT）加入PVC木塑体系，制备了有机蒙脱土／木粉／聚氯乙烯（OMMT／WF／PVC）纳米复合材料。采用锥形扫描量热测试法研究了OMMT用量对WF／PVC复合材料阻燃性能的影响。结果表明，添加OMMT可明显降低木塑的初始热失重率，但使快速热分解的开始时间提前，大大提高样品的燃烧残余率，显著延迟木塑的点燃时间和燃烧热峰值产生时间，OMMT起到了有效的阻燃作用。OMMT的加入还降低了总燃烧热，但燃烧热峰值有所增加，并使发烟量有所增加，CO和CO2产率也随之提高，增加了木塑燃烧的烟气危害性。     

乙醇对溶胶-凝胶法制备SiO_2溶胶性能的影响

以HNO3为催化剂,用正硅酸乙酯(TEOS)溶胶-凝胶工艺制备纳米多孔二氧化硅薄膜。较详细地研究了工艺参数乙醇/TEOS摩尔比对溶胶性能的影响.结果表明,随着乙醇/TEOS摩尔比的增大,溶胶粘度减小,凝胶时间变长,胶体粒径有变小趋势。     

基于Pro／E参数化斜齿轮建模技术

应用Pro／E软件的参数化造型功能，不需要二次开发，直接创建渐开线斜齿圆柱齿轮模型，对直齿、人字齿齿轮的建模具有借鉴作用。     

PA6/SANMAH/GF复合材料的制备及其性能研究

采用双螺杆挤出机通过熔融共混制备了尼龙6／（苯乙烯／丙烯腈／顺丁烯二酸酐）共聚物／玻璃纤维（PA6／SANMAH／GF）复合材料，测试了材料的拉伸强度、弯曲强度、弯曲弹性模量、缺口冲击强度、热变形温度、吸水率、熔点和熔融焓，并与GF增强PA6（PA6／GF）复合材料和GF增强PA6／（苯乙烯／丙烯腈）共聚物（PA6／SAN／GF）复合材料进行了性能对比。结果表明，在PA6与SANMAH的质量比为100：3—30时，PA6／SANMAH／GF复合材料的拉伸强度与PA6／GF复合材料相当，但高于PA6／SAN／GF复合材料，弯曲强度和弯曲弹性模量高于PA6／GF和PA6／SAN／GF复合材料．缺口冲击强度高于PA6／GF复合材料，但低于PA6／SAN／GF复合材料；在PA6与SANMAH的质量比为100：40时，PA6／SANMAH／GF复合材料的拉伸强度、弯曲强度和缺口冲击强度明显降低；在整个试验范围内，PA6／SANMAH／GF复合材料的热变形温度比PA6／GF和PA6／SAN／GF复合材料低4～7℃；吸水率随着SAN-MAH用量的增加而逐渐减小。     

New Process for the Preparation of Monodispersed, Spherical Silica Particles

A new method is presented for preparing highly monodispersed silica particles using a two-stage semibatch/batch hydrolysis reaction of Si(OC₂H₅)₄. The slower rate of hydrolysis of the tetraethylorthosilicate (TEOS) that occurred during the semibatch process resulted in larger silica particles with a higher yield and narrower size distribution. This was in direct contrast to the batch process. In addition, the ability of four different mixed processes to produce silica particles with good packing density, narrower particle-size distribution, and higher yield were evaluated. These were batch/batch (B-B), batch/semibatch (B-S), semibatch/batch (S-B), and semibatch/semibatch (S-S) processes. The S-S system produced the largest particles with the highest yields. The size of the silica particles obtained by the S-B method decreased with increasing reaction time, while the particles obtained by the B-S process had the best particle-size distribution and packing density. In conclusion, a mixed batch/semibatch system was the best way to produce an extremely narrow particle-size distribution and a good packing density.     

Premodification of Pt/γAl2O3 with Cinchonidine for the Enantioselective Hydrogenation of Ethyl Pyruvate: Effect of Premodification Conditions on Reaction Rate and Enantioselection

The premodification of a 5 wt% Pt/-Al₂O₃ catalyst with cinchonidine (0.01 and 0.2 g g^-1 _catalyst) is described and discussed. Premodification is carried out by treating the catalyst with a solution of cinchonidine followed by solvent removal. Catalysts premodified in this way give the same ee and initial rate of reaction for the enantioselective hydrogenation of ethyl pyruvate as those using the standard in situ modification procedure. Investigations of different solvents for premodification and reaction (dichloromethane, ethanol) show that it is the solvent used for the reaction that controls the observed enantioselection. Premodified catalysts also display the initial transient behavior typically observed with in situ modified catalysts in which the ee increases with conversion in the early part of the reaction. Premodified catalysts show an enhanced rate of reaction when ethanol is used as the reaction solvent compared with in situ modified catalysts under the same conditions. Premodification using aerobic conditions gives the best results and premodified catalysts can be stored prior to use for up to a week without loss of catalytic performance.     

固体超强酸SO2-4/TiO2-SiO2催化合成马来酸二辛酯

用H2SO4浸渍钛硅复合氧化物，制得固体超强酸SO4^2-/TiO2-SiO2，考察了催化剂对马来酸酐与正辛醇的酯化反应的催化作用及其制备条件对催化剂活性的影响，并与硫酸，对甲苯磺酸的催化效果比较，结果表明，对于给定反应，当n(Ti):n(Si)为15：1，用浓度0．6mol/L的硫酸浸渍8h，在550℃下焙烧3h时制得的催化剂SO4^2-/TiO2-SiO2具有最高的催化活性，用以催化马来酸酐和正辛醇的酯化反应，可得无色透明的酯化产物，3h内酯化率达99．1％，较SO4^2-/TiO2催化剂的酯化率提高了约6％。