掺钕聚甲基丙烯酸甲酯的光学特性

研究了制备的掺钕螯合物Nd(DBM)3Phen材料的吸收光谱、激发光谱、荧光光谱,应用Judd-Ofelt理论计算了该材料的强度参量．分析了钕离子激发态4F3／2的辐射寿命(631 μs)和4F3／2→4IJ′跃迁的受激发射截面和荧光分支比．     

两种方法制备ITO薄膜的红外特性分析

比较了用电束加热蒸发法和直流磁控溅射法制备的氧化锡铟(ITO)薄膜在红外波段的光学特性实验发现,通过直流磁控溅射在常温下制备的ITO薄膜在红外波段折射率稳定、消光系数小,比电子束加热蒸发制备的膜有较高的透过率在波长1550nm附近的透过率可达86%以上,消光系数约为004,方电阻最低为100Ω/□.     

纳米颗粒团聚物流化特性的数值研究

基于气固两相流体动力学理论,建立气体纳米颗粒团聚物两相流动双流体模型.模型中采用了Jung ＆ Gidaspow (2002)测量的固相应力模量和王垚等(2001)提出的聚团曳力系数计算模型.对纳米颗粒团聚物的流化过程进行了数值模拟,得到纳米颗粒团聚物的流化特性.模拟得出的床层膨胀比与文献中实验的结果较为接近.     

What Is Its Real Existing Form?——Theoretical and Experimental Studies on 2-Mercaptobenzothiazole

1 INTRODUCTION The study of heterocyclic molecules with aroma- tic rings and their absorptions on metals is of con- siderable importance from both theoretical and te- chnological points of view. These molecules are in- teresting because of their applications as corrosion inhibitors and flotation collectors, and their abilities to form self-assembly layers[1]. 2-Mercaptobenzo- thiazole (C7H5NS2, in the following MBT) is an important heterocyclic molecule, which can be used as corrosion …     

X射线衍射研究N2+注入Si

本文首先给出了180keV的N₂⁺注入Si的X射线衍射(XRD)分布,然后用Levenberg-Marquardt最优化方法模拟实验曲线。根据XRD运动学理论,在我们给出的试探胁变函数和多层模型的基础上,用自编程序计算给出了晶格胁变随注入深度、剂量和退火温度的变化。最后我们对实验和计算结果进行了初步的分析讨论。 关键词：     

双面加热环形通道内干涸点的确定

根据环形管通道内流体流动和换热的特点,以Kirillov和Smogalev提出的干涸点理论模型假设为基础,从最基本的质量守恒方程出发,并引入临界液膜厚度等相应的辅助模型,得到了双面加热环形通道内流动沸腾干涸点的理论模型。同时针对间隙为1.0mm和1.5mm的环形窄缝进行了低压低质量流速工况下干涸点的实验研究。比较发现理论模型预测值与实验结果基本相符。说明本文提出的理论模型适用于低压低流量条件下的窄环形通道。实验同时发现:环状流临界热流密度在系统压力为2.2MPa达到最大值,临界含汽量随质量流速的增大呈缓慢下降趋势。     

串联双环光微谐振器的滤波特性

详细研究了串联双环光微谐振器的光带通滤波特性，给出了其通带带宽的公式，分析了出／入环光耦合系数和环间光耦合系数对通带特性的影响，计算并特别强调了滤波通带的结构特点，也分析了微环中存在的光损耗对串联双环光微谐振器的滤波特性的影响。     

氢原子光谱实验研究

氢原子的结构简单，其光谱具有明显的规律，各种原子光谱线规律性的研究首先是在氢原子上得到突破。通过测量氢光谱可见谱线的波长，能较准确测定氢的里德伯常数，可使学生对近代物理测量有初步了解。     

Experimental Study of Effect of Medium Boundary on Light Distribution in Tissue Phantoms

An experimental method for investigating the effect of medium boundary on distributions of light in the biological tissue phantom intralipid is presented. Measurements of distributions of light in intralipid-10% suspensions at 633 nm are described, in which a narrow collimated beam is incident on the surface of the phantoms and into the different depths inside of the phantoms. The experimental results show that the effect of the boundary of the medium on the curves geometry of light distributions is trivial, but the effect on intensity of scattering light is obvious, the maximal relative change of the energy fluence reaches 53.8% and the position of the peak of the energy fluence curve has a shift of 1.1 mm in the reverse direction of incident light for the phantom with albedo a=0.998, and the effect of the boundary is decreased with the increase of the absorption coefficients of tissue phantoms. The experimental results were analysed by the diffusion theory. These studies will be helpful for further understandings of the relation between the boundary of biological tissue and the distribution of light in tissue.     

12kW二极管泵浦激光模块

二极管泵浦固体激光器（DPL）具有寿命长、热负载小、结构紧凑等优点，在工业加工、军事、通讯等领域都得到了广泛的应用。在高光束质量、高平均功率DPL激光器的研究中，目前普遍采用MOPA结构的光路布局——由谐振腔产生出低功率的单横模激光输出，经多路放大后达到满足需求的功率水平。而激光放大模块作为放大光路中的核心部件，其增益分布特性将直接影响到光束放大过程中的波前变化，因此如何在提高激光放大模块储能的同时提高模块增益分布的均匀性，从而减少光路放大过程的波前畸变，对于进一步研制高平均功率、高光束质量的半导体泵浦固体激光器具有非常重要的意义。