油煤浆的管道输送特性与管路设计原则

通过理论分析和管道实验，探讨了油煤浆在工业管道输送中的流变特性、流动状态和阻力特性，得出了油煤浆的物性参数、表观参数、管道阻力参数的测定值和计算公式，并在此基础上探讨了油煤浆管道输送的设计原则，为油煤浆管路的设计提供基础数据、计算方法和一般原则。     

三探测器密度测井数据处理方法研究

数据处理方法研究是三探测器岩性密度测井研究的一个重要方面。在Monte Carlo模拟的基础上，提出了2种三探测器岩性密度测井求取地层光电吸收指数Pe和进行泥饼校正求取地层密度ρb的方法；就三探测器岩性密度测井仪DTLD—2的围岩补偿功能进行了研究。结果显示了用计算机模拟方法研究核测井问题可以节省建造实体物理模型的费用和人力，具有广泛的应用前景。     

地层测试对油层改造选井选层的重要性及改造措施有效性评价

经对胜利油田近三年来典型井例测试资料分析评价及其增产措施效果分析认为，有三类地层压裂增油效果很好：地层物性相对较好的常压系统且存在严重堵塞的储层；物性较好的常压地层；高压低渗透储层。有两类地层酸化效果很好：灰岩、白云岩裂缝、低产低渗透储层；物性较好且存在严重污染堵塞的储层。其它地层压裂、酸化一般是无效的。     

Characteristic Investigation of Nano-Crystal Hydrogen Storage Alloys

A Ml (NiCoMnA1)5 hydrogen storage alloys was prepared by double-roller rapid quenching.Its microstructure, electrochemically and kinetic characteristic were studied.A uniform crystal phase with CaCu5 structure could be detected by XRD analyses, whose average grain size is 30 ～ 50 nm and the ratio of c/a of nano-crystal hydrogen storage alloy is larger.The hydrogen absorption/desertion p - C isotherms of alloy show that its fiat-performance is perfect and the magnetic stagnant effect is very little.An simulate cell is used for electrochemical measurement.Electrode is 10C, the capacity decreasing rate via the 450 cycles at 7C is less than 20%.     

超低渗广谱油层保护技术在板深51区块的应用

板深51区块存在压力敏感地层，在非目的层井段存在大段高渗低压砂岩，而目的层又属于高压低渗地层，属于难采油气田。室内进行的砂床滤失量、砂床封堵带承压能力、岩心封堵带的承压能力及油气层保护效果实验表明，在超低渗钻井液中增加固相含量，能够提高超低渗透膜结构强度，提高地层承压能力，降低砂床侵入深度，增强保护油气层效果，而且有选择性地增加有用固相效果更佳。基于这一理论，研究成功了超低渗广谱屏蔽暂堵油层保护技术，并在板深51区块长22—15井和长23—17K井进行了试验应用。该技术的关键是依据地层特性确定复配暂堵剂。长22-15井和长23-17K井射孔后未经过压裂、酸化、排液处理，获自喷高产，尤其是长22-15井形成自喷油流，创油田单井试采产量最高记录。应用结果表明，超低渗广谱保护油气层钻井液技术封堵隔层的承压能力强，很大程度地提高了漏失层的承压能力和破裂压力，较好地解决了含多套压力层系长裸眼段钻井过程中发生的漏失、井喷、卡钻、油气层保护等技术难题。     

利用Love波特性计算地基动力响应

本文利用Love波弥散特性在频域上对地基出平面振动及扭振问题进行了研究。在计算区域内结构将采用有限单元划分,而在边界上则根据Love 面波特性使用传递边界有限单元。本文同时讨论了不同模态波对结构动力响应的贡献。本文方法也适合于静力分析。     

On modeling the design of cellular manufacturing systems

A new optimization model is discussed for the design of cellular manufacturing systems. It is based on an integer programming formulation that updates some other models by eliminating redundant machine assignment and cost coefficients dependent on cell configuration. To reduce computational burdens, a simplified integer programming model and a decomposition algorithm are proposed. Several computer solutions were performed to evaluate the performance of the new model. The computational results are discussed.     

用常规电阻率测井资料确定水淹层的剩余油饱和度

油田综合含水越来越高，利用电阻率测井资料确定地层的剩余油饱和度变得非常困难。针对这一问题，提出了确定地层水民阻率和含油饱和度的方法。（１）利用已知的地怪水分析资料，采用井下自然电位刻度，井间对经和双自然电位一方法来示准地层水混合电阻率，然后利用相邻井相同地层的电阻率对比方法求含水饱和度。（２）利用电阻率的横向探测特性，避开阿尔奇公式中ｍ、ａ选择上的困难，采用横向法计算水淹层目前的含水饱和度。利用以     

东海西湖凹陷探井钻井完井液技术

介绍了东海西湖凹陷的储层特征。在分析探井储层损害原因的基础上，提出了优化的海水钻井完井液体系。两口井应用表明，储层保护效果明显。     

Ammoxidation of methylaromatics over vanadium phosphate catalysts II. Catalyst formation, active sites and reaction mechanism

The interactions of VOHPO₄· 0.5H₂O and (VO)₂P₂O₇ with the ammoxidation feed and the single components such as ammonia, oxygen, water and component mixtures were studied in detail using XRD and temperature-programmed reaction spectroscopy. The aim of this work was to improve the knowledge of the formation of the active phases or active sites of the catalysts from their precursors under the condition of the ammoxidation reaction. Similar catalytic properties of various applied VPO materials were discussed in terms of the presence of similar structure elements (domains of adjacent edge-sharing VO₆ octahedra-units and P-O-NH₄ groups).