Densities and Excess Molar Volumes of Binary and Ternary Mixtures of Aqueous Solutions of 2,2,2-Trifluoroethanol with Acetone and Alcohols at the Temperature of 298.15 K and Pressure of 101 kPa

Excess molar volumes V_m^E of the binary mixtures of (trifluoroethanol + 1-propanol), (trifluoroethanol + 2-propanol), (acetone + water), (methanol + water), (ethanol + water), (1-propanol + water), (2-propanol + water), and the ternary mixtures of (trifluoroethanol + methanol + water), (trifluoroethanol + ethanol + water), (trifluoroethanol~+ 1-propanol + water), (trifluoroethanol + 2-propanol + water) and (trifluoroethanol + acetone + water) were measured with a vibrating tube densimeter at the temperature of 298.15 K and the pressure 101 kPa. The extrema in V_m^E of trifluoroethanol mixtures occur at –0.690 cm³-mol^–1 for (trifluoroethanol + 1-propanol), at –0.990~cm³-mol^–1 for (trifluoroethanol + 2-propanol); at 0.562 and –0.973 cm³-mol^–1 for (trifluoroethanol + methanol + water), at 0.629 and –0.973 cm³-mol^–1 for (trifluoroethanol + ethanol + water), at 1.082 and –0.659 cm³-mol^–1 for (trifluoroethanol~+ 1-propanol + water), at 0.998 and –0.991 cm³-mol^–1 for (trifluoroethanol~+ 2-propanol + water), and at 0.515 and –1.472 cm³-mol^–1 for (trifluoroethanol + acetone + water). The experimental ternary V_m^E values were predicted by empirical expressions using binary solution data.     

Phase study of the system Li2Se-In2Se3

The binary system Li₂Se-In₂Se₃ was investigated in the range of 40 to 100 mol% In₂Se₃ by thermoanalytical and X-ray methods. The system is characterized by two eutectic points. Beside the two binary components and the known ternary compound LiInSe2 another ternary compound crystallizes in this binary system at 83.3 mol% In₂Se₃. This compound was identified as LiIn₅Se₈. In contrast to (Cu, Ag)^IB₅ ^IIIC₈ ^VI compounds such as CuIn₅S₈ [1] it does not crystallize in the spinel structure. LiIn₅Se₈ shows a stratified structure. The melting point was determined to be at 810°C. Starting from room temperature up to the melting point no phase transitions were observed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Binary and Ternary Complexes Between Lauryl Hexaoxyethylene, Benzoate and Cyclodextrin. Part II. β-CD

The characterization of binary and ternary complexes of benzoate, lauryl hexaoxyethylene (C₁₂E₆) and -CD is presented. The complexation equilibrium was characterized by UV-Vis spectrophotometry, titration microcalorimetry, capillary electrophoresis, and 2D ROESY ¹H-NMR. Results suggested that -CD forms one complex with C₁₂E₆in the stoichiometric ratio of -CD : C₁₂E₆1.5 : 1, with a stability constant 1.3 × 10⁵ M^-1.5. The 2-D ROESY ¹H-NMR spectrum indicated that C₁₂E₆is included inside the -CD cavity. The primary binding site of C₁₂E₆ is on the lauryl subunit of this molecule. Analogous to a previously reported study of -CD, the combination of -CD and C₁₂E₆precipitated from the solution. Addition of benzoate seemed to dissolve the precipitate and nearly doubled the apparent stability constant of the complex. Results from the various techniques supported formation of ternary complexes between -CD, C₁₂E₆, and benzoate.     

H-, C-NMR and ethylene polymerization studies of zirconocene/MAO catalysts: effect of the ligand structure on the formation of active intermediates and polymerization kinetics

Using ¹H- and ¹³C-NMR spectroscopies, cationic intermediates formed by activation of L₂ZrCl₂ with methylaluminoxane (MAO) in toluene were monitored at Al/Zr ratios from 50 to 1000 (L₂ are various cyclopentadienyl (Cp), indenyl (Ind) and fluorenyl (Flu) ligands). The following catalysts were studied: (Cp-R)₂ZrCl₂ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu), rac-ethanediyl(Ind)₂ZrCl₂, rac-Me₂Si(Ind)₂ZrCl₂, rac-Me₂Si(1-Ind-2-Me)₂ZrCl₂, rac-ethanediyl(1-Ind-4,5,6,7-H₄)₂ZrCl₂, (Ind-2-Me)₂ZrCl₂, Me₂C(Cp)(Flu)ZrCl₂, Me₂C(Cp-3-Me)(Flu)ZrCl₂ and Me₂Si(Flu)₂ZrCl₂. Correlations between spectroscopic and ethene polymerization data for catalysts (Cp-R)₂ZrCl₂/MAO (R=H, Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu) and rac-Me₂Si(Ind)₂ZrCl₂ were established. The catalysts (Cp-R)₂ZrCl₂/AlMe₃/CPh₃⁺B(C₆F₅)₄⁻ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, n-Bu, t-Bu) were also studied for comparison of spectroscopic and polymerization data with MAO-based systems. Complexes of type (Cp-R)₂ZrMe⁺←Me⁻-Al≡MAO (IV) with different [Me-MAO]⁻ counteranions have been identified in the (Cp-R)₂ZrCl₂/MAO (R=n-Bu, t-Bu) systems at low Al/Zr ratios (50-200). At Al/Zr ratios of 500-1000, the complex [L₂Zr(μ-Me)₂AlMe₂]⁺[Me-MAO]⁻ (III) dominates in all MAO-based reaction systems studied. Ethene polymerization activity strongly depends on the Al/Zr ratio (Al/Zr=200-1000) for the systems (Cp-R)₂ZrCl₂/MAO (R=H, Me, n-Bu, t-Bu), while it is virtually constant in the same range of Al/Zr ratios for the catalytic systems (Cp-R)₂ZrCl₂/MAO (R=1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄) and rac-Me₂Si(Ind)₂ZrCl₂/MAO. The data obtained are interpreted on assumption that complex III is the main precursor of the active centers of polymerization in MAO-based systems.     

Cleavage of a DNA fragment by a binary oligonucleotide reagent

The possibility of specific cleavage of a single-stranded DNA fragment due to cooperative action of two oligonucleotide derivatives bearing chemical groups (at the 3"-phosphate and 5"-thiophosphate ends, respectively) located close to each other in a complementary complex is demonstrated.     

Subsolidus phase relations and crystal structures of R-Ca-Cu-O (R=Nd, Sm, Gd, Tm) systems

The subsolidus phase relations of R₂O₃-CaO-CuO ternary systems (R=Nd, Sm, Gd, Tm) have been investigated by X-ray powder diffraction. All samples were synthesized at about 950° in air. There exists a ternary compound Ca_14−xR_xCu₂₄O₄₁ (x = 4 for R=Nd, Gd and x = 5 for R = Sm) and a ternary solid solution Ca_2+xR_2−xCu₅O₁₀ (R=Nd, Sm, Gd, Tm) with a wide composition range Δx of about 0.6. The compound Ca_14−xR_xCu₂₄O₄₁ possesses a layered orthorhombic structure and is isostructural to Sr_14−xCa_xCu₂₄O₄₁. The lattice parameters a and c of the compound are basically independent of the ionic radius of R, while the lattice parameter b and unit-cell volume V decrease substantially with the decrease of the ionic radii of R. The Ca_2+xR_2−xCu₅O₁₀ solid solution is isostructural to Ca_2+xY_2−xCu₅O₁₀, the structure of which is based on an orthorhombic “NaCuO₂-type” subcell containing infinite one-dimensional chains of edge-shared square planar cuprate groups crosslinked by the layered cations Ca and R that locate in the inter-chain tunnels.     

Subsolidus phase relations and crystal structure of compounds in the PrOx-CaO-CuO system

The subsolidus phase relations of the PrO_x-CaO-CuO pseudo-ternary system sintered at 950-1000°C have been investigated by X-ray powder diffraction. In this system, there exist one compound Ca₁₀Pr₄Cu₂₄O₄₁, one Ca₂Pr₂Cu₅O₁₀-based solid solution, seven three-phase regions and two two-phase regions. The crystal structures of Ca₁₀Pr₄Cu₂₄O₄₁ and Ca₂Pr₂Cu₅O₁₀-based solid solution have been determined. Compound Ca₁₀Pr₄Cu₂₄O₄₁ crystallizes in an orthorhombic cell with space group D_2h²⁰−Cccm, Z=4. Its lattice parameters are a=11.278(2) Å, b=12.448(3) Å and c=27.486(8) Å. The crystal structure of Ca₂Pr₂Cu₅O₁₀-based solid solution is an incommensurate phase based on the orthorhombic NaCuO₂ type subcell. The lattice parameters of the subcell of the Ca_2.4Pr_1.6Cu₅O₁₀ are a₀=2.8246(7) Å, b₀=6.3693(5) Å, c₀=10.679(1) Å, and those of the orthorhombic superstructure are with a=5a₀, b=b₀, c=5c₀. The Ca_2.4Pr_1.6Cu₅O₁₀ structure can also be determined by using a monoclinic supercell with space group C_2h⁵−P2₁/c, Z=4, a=5a₀, b=b₀, and β=104.79(1)° or 136.60(1)°, V=5a₀b₀c₀.     

Rumer's transformation,in biology,as the negation,in classical logic

In this article, we make a connection between the Rumer transformation, used in the study of the genetic code‐doublets, and the negation of classic logic. A unified classification is given, relying on two Klein's 4‐groups describing the symmetries of the 16 doublets of nitrogenous bases and those of the 16 binary connectives of classic logic, both groups being subgroups of a larger noncommutative group with eight elements we identify as the dihedral group D₄. Also, some connections with other works are briefly considered. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

Kinetic analysis of thermogravimetric data

Four many curves methods, viz. calculation techniques based on Eqs (30), (31), (34) and (36), respectively, for deriving kinetic parameters from several TG curves recorded with different heating rates are tested on two sets of theoretical TG curves. The maximum reaction rate temperature and conversion, as well as the approximate formulae used for their calculation are discussed. Some aspects of the kinetic compensation effect are analysed. The final conclusion is that the use of the many curves methods is not reasonable.     

Correlation between excess adsorption data measured for solvent mixture/adsorbent systems and RM values obtained for different solutes chromatographed in binary mobile phases

This paper concerns the application of excess adsorption isotherms, measured for solvent mixture/adsorbent systems, to the characterization of TLC data. For this purpose the excess adsorption isotherms for three liquid mixtures: cyclohexane/ benzene, benzene/acetone, and carbon tetrachloride/ethyl acetate on silica gel at 20°C have been measured. These mixtures have been used as binary mobile phases in TLC measurements. It has been shown for a given solute in binary mobile phase that the quantity R_M is a simple function of the excess adsorption. Parameters of this function have been used to characterize chromatographic systems with binary mobile phases.