Three-dimensional quantum dynamics study of vibrational predissociation of HeI_2 van der Waals molecule for low vibrational excitation using the time-dependent wave packet method

Three-dimensional quantum mechanical calculations for vibrational predissociation of HeI2(B) van der Waals molecules are presented using the time-dependent wave packet technique within the golden rule approxima tion.The total and partial decay widths,lifetimes,rates and their dependence on initial vibrational states were obtained for HeI2 at low initial vibrational excited levels.Our calculations show that the calculated tota decay widths,lifetimes and rates agree well with those extrapolated from experimental data available The predicted total decay widths as a function of initial vibrational states exhibit highly nonlinear behavior.The very short propagation time (less.than 1 ps) required in the golden rule wave packet calculation is determined by the duration time of the final state inter-action between the fragments on the vibrationally deexcited adiabatic potential surface.The final state interaction between the fragments is shown to play an important role in determining the final rotational distri     

Correlation between repeated measurements: bane and boon of the GUM approach to the uncertainty of measurement

With measurement uncertainty estimation accounting for all relevant uncertainty contributions, the results of measurements using the same procedure on different objects or samples may no longer be considered as being independent, and correlations have to be taken into account. For this purpose, a simple approximation for the estimation of covariances is derived and applied to the estimation of uncertainty for some basic combinations of two measurement results. This covariance estimate is also applied to the estimation of uncertainty for the mean value of the results of replicate measurements on the same object or sample.

Ionization thresholds and positions of avoided crossing of potassium Stark Rydberg states: a Stark-adapted quantum defect orbital treatment

We have calculated the positions of the avoided level crossings between (n+2)s, np states and nd, k Stark states in the Rydberg Stark states of the potassium atom with principal quantum number n comprised between 12 and 17. We have also studied the adiabatic electric field ionization thresholds for the above Rydberg states. Both the ionization thresholds and the positions of avoided crossings have been calculated using the recently developed Stark-adapted quantum defect orbital (SQDO) formalism. The presently reported values appear to be in very good agreement with the available theoretical and experimental data.     

Using a process-centered approach to minimize the effort of compliance

 The complexity of different quality standards can, in principle, be covered by different approaches and strategies. In-depth process mapping of quality control (QC) work streams was used by the analytical laboratories of Lonza AG to show up the principle differences in being compliant to different quality systems. The results identified two main drivers for all necessary actions: process-related activities and infrastructure-related activities. In addition, a clear indication of the economic impact of these driving forces was gained, which led the laboratories to decide on a process-oriented approach. This approach has the advantage of being able to reflect the different demands of different quality assurance (QA) regulations within the same QC organizational structure. Following the process helps avoid unnecessary efforts in analytical work and represents a very economical approach, at the same time, providing high flexibility to react to different QA or customer demands. Received: 5 July 2002 Accepted: 12 November 2002 Acknowledgements The process-oriented approach resulted from many, very challenging discussions for which I would like to thank the staff of my organization (Analytics & QC), especially, the QA staff and the LIMS team. Presented at Analytica Conference, 23–26 April 2002, Munich, Germany Correspondence to B. Ciommer     

Implementation of a general multireference configuration interaction procedure with analytic gradients in a semiempirical context using the graphical unitary group approach

The graphical unitary group approach has been applied in an efficient implementation of a general multireference configuration interaction (MRCI) method for use with small active molecular orbital spaces in a semiempirical framework. Gradients can be computed analytically for molecular orbitals from a closed-shell or a half-electron open-shell Hartree-Fock calculation. CPU times for single point energy and gradient calculations are reported. The code allows MRCI geometry optimizations of large molecules, as illustrated for the singlet ground state and the four lowest triplet states of fullerene C(76).     

On the influence of nuclear fluctuations on calculated NMR shieldings of benzene and ethylene: a Feynman path integral–ab initio investigation*

The absolute magnetic shieldings of benzene and ethylene have been theoretically studied under the conditions of thermal equilibrium, i.e., under explicit consideration of the nuclear degrees of freedom. For this purpose we have combined the Feynman path integral quantum Monte Carlo (PIMC) formalism with the gauge‐including atomic orbital (GIAO) approach in the Hartree–Fock (HF) approximation. The HF operator has been employed to derive the NMR parameters of the two hydrocarbons via an ensemble averaging over large sets of molecular configurations that are populated in thermal equilibrium. The nuclear fluctuations are responsible for a deshielding of the nuclei relative to the shieldings at the vibrationless minimum of the potential energy surface (PES). The influence of the nuclear degrees of freedom is largest for the isotropic part of the ¹³C shielding tensor. The theoretical results can be explained on the basis of simple geometrical considerations. The bond lengths in thermal equilibrium are larger than the bond lengths at the minimum of the PES. This length enhancement is the prerequisite for a deshielding of the nuclei in thermal equilibrium. The vibrational corrections of the nuclear magnetic resonance (NMR) parameters of benzene and ethylene are quantum driven; classical thermal degrees of freedom of the nuclei are of minor importance. Conceptual problems of theoretical studies of NMR parameters on the basis of a single molecular geometry are emphasized. The influence of the spatial uncertainty of the nuclei becomes decisive in molecules with light atoms. It is pointed out that the combination of the PIMC formalism with electronic Hamiltonians of state‐of‐the‐art quality renders possible accurate determinations of NMR parameters. © 2002 John Wiley & Sons, Inc. Int J Quantum Chem 86: 280–296, 2002     

Osmotic coefficients of vinylic polyelectrolyte solutions without added salt

 The osmotic pressures of –polyelectrolyte solutions without added salt was measured in the concentration ranges 0.001–0.02 and 0.2–1.9 mol kg^-1. Our results show that the osmotic coefficients φ_p were strongly dependent on the chemical structures of polyelectrolyte through the polyion radius and the interaction between the ionic moiety and counterions. The osmotic pressures in polyelectrolyte solutions without added salt, calculated on the basis of the counterion contribution, are in agreement with the experimental results. We conclude that the counterion contribution is dominant in the osmotic pressures and thus, the polymer contribution is negligible in the examined concentration range 0.2–1.9 mol kg^-1. The P–B approach gave a fair prediction of the absolute values of the osmotic pressures with λ=4.5, where λ is the charge density parameter, except for NaPA. In other words, the concentration dependence of the φ_p values can be explained in terms of the counterion contribution. Received: 11 June 1997 Accepted: 19 August 1997     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

Flow over rectangular porous block in a fixed width channel: influence of porosity and aspect ratio

Flow over a rectangular porous block placed in a fixed width channel is considered and the influence of block aspect ratio on the heat transfer rate from the block is examined. A non-porous solid block is also accommodated to compare the effect of porosity on the flow field and heat transfer characteristics. Aspect ratio and the porosity of the block are varied in the simulations. A numerical scheme employing a control volume approach is considered when predicting the flow and temperature fields. The Reynolds number is selected to yield the mix convection situation in the flow field. It is found that the aspect ratio significantly influences Nu and Gr numbers, in which case increasing the aspect ratio enhances Nu while lowering Gr. Increasing porosity improves the heat transfer rates from the porous block, provided that at high aspect ratios, this situation ceases due to blockage effect of the body in the channel.     

Equivalent nonlinear beam model for the 3-D analysis of shear-type buildings: Application to aeroelastic instability

Tower buildings can be very sensitive to dynamic actions and their dynamic analysis is usually carried out numerically through sophisticated finite element models. In this paper, an equivalent nonlinear one-dimensional shear–shear–torsional beam model immersed in a three-dimensional space is introduced to reproduce, in an approximate way, the dynamic behavior of tower buildings. It represents an extension of a linear beam model recently introduced by the authors, accounting for nonlinearities generated by the stretching of the columns. The constitutive law of the beam is identified from a discrete model of a 3D-frame, via a homogenization process, which accounts for the rotation of the floors around the tower axis. The macroscopic shear strain in the equivalent beam is produced by the bending of columns, accompanied by negligible rotation of the floors. A coupled nonlinear shear–torsional mechanical model is thus obtained. The coupling between shear and torsion is related to a non-symmetric layout of the columns, while mechanical nonlinearities are proportional to the slenderness of the columns. The model can be used for the analysis of the response of tower buildings to any kind of dynamic and static excitation. A first application is here presented to investigate the effect of mechanical and aerodynamic coupling on the critical galloping conditions and on the postcritical behavior of tower buildings, based on a quasi-steady model of aerodynamic forces.