超高密度磁记录的课题与展望

介绍了超高密度记录的研究开发状况 ,论述了垂直磁记录技术的课题以及采用TMR磁头的、记录密度为Subterabit in2 的记录 读出特性。作为高密度记录所必需的头 盘界面技术 ,提出了接触记录技术的课题 ,还就STM (Scanningtunnelingmicroscopy)存储器论述了未来超高密度技术     

Change of short-term memory effect in acute ischemic ventricular myocardium: A computational study

The ionic mechanism of change in short-term memory (STM) during acute myocardial ischemia has not been well understood. In this paper, an advanced guinea pig ventricular model developed by Luo and Rudy was used to investigate STM property of ischemic ventricular myocardium. STM response was calculated by testing the time to reach steady-state action potential duration (APD) after an abrupt shortening of basic cycling length (BCL) in the pacing protocol. Electrical restitution curves (RCs), which can simultaneously visualize multiple aspects of APD restitution and STM, were obtained from dynamic and local S1S2 restitution portrait (RP), which consist of a longer interval stimulus (S1) and a shorter interval stimulus (S2). The angle between dynamic RC and local S1S2 RC reflects the amount of STM. Our results indicated that compared with control (normal) condition, time constant of STM response in the ischemic condition decreased significantly. Meanwhile the angle which reflects STM amount is less in ischemic model than that in control model. By tracking the effect of ischemia on intracellular ion concentration and membrane currents, we declared that changes in membrane currents caused by ischemia exert subtle influences on STM; it is only the decline of intracellular calcium concentration that give rise to the most decrement of STM.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

ASYMPTOTIC PROPERTIES OF SOME PRELIMINARY ESTIMATORS FOR AUTOREGRESSIVE MOVING AVERAGE TIME SERIES MODELS

Abstract. Some simple preliminary estimators for the coefficients of mixed autoregressive moving average time series models are considered. As the first step the estimators require the fitting of a long autoregression to the data. The first two methods of the paper are non-iterative and generally inefficient. The estimators are Yule-Walker type modifications of the least squares estimators of the coefficients in auxiliary linear regression models derived, respectively, for the coefficients of the long autoregression and for the coefficients of the corresponding long moving average approximation of the model. Both of these estimators are shown to be strongly consistent and their asymptotic distributions are derived. The asymptotic distributions are used in studying the loss in efficiency and in constructing the third estimator of the paper which is an asymptotically efficient two-step estimator. A numerical illustration of the third estimator with real data is given.     

SIMULATION AND ESTIMATION OF LONG MEMORY CONTINUOUS TIME MODELS

Abstract. Some general properties of long memory continuous time processes are recalled or proved. Methods of simulation are studied. A comparison with the usual discrete time autoregressive fractionally integrated moving-average filter is made and illustrations are provided. Then, two methods of estimation of the parameters of such a model from a discrete sample are studied, both theoretically and empirically, with Monte Carlo experiments.     

宽带功率放大器PGSC建模方法及预失真研究

针对宽带功率放大器的强记忆效应特性,提出一种功放建模和数字预失真方法——PGSC模型。利用广义记忆多项式(GMP)、特定交叉项(SCT)及记忆时刻信号交叉项(CIMT)3个基函数来构造功放行为模型及数字预失真器,并搭建实际测试平台对模型的精度及线性化效果进行验证。测试结果表明,与PMEC方法相比,PGSC方法建模时的归一化均方误差减少了2.1 dB,数字预失真时输出信号的三阶邻信道功率比降低了4.94/2.03 dB;与GMP方法相比,PGSC方法仅利用73%的系数即可得到更高的模型精度和更好的线性化效果。     

Electrochemical anticorrosion performance evaluation of Al2O3 coatings deposited by MOCVD on an industrial brass substrate

Alumina (Al₂O₃) coatings of different thickness were deposited on OT59 brass substrate (BS) using the metal organic chemical vapour deposition (MOCVD) technique to evaluate the corrosion performance by EIS measurements. The used precursor was dimethyl-aluminium-isopropoxide. Electrochemical characterizations of the deposited films were performed in a standard very aggressive acidic solution (aerated 1N H₂SO₄ at 25 °C up to 168 h of immersion time) by means of direct current method (Tafel curves) and electrochemical impedance spectroscopy (EIS). The Rutherford backscattering spectroscopy (RBS) indicated that the films are very pure with the correct Al₂O₃ stoichiometry, while the IR absorption spectra showed that the films did not contain any OH groups. The surface film morphology was investigated by atomic force microscopy (AFM) and displayed a globular texture. The films were very smooth, with a maximum root mean square roughness, for example, of 14 nm for a 0.96 μm thick coating. The EIS data confirmed, as expected, that a 2.40 μm Al₂O₃ layer ensures the best corrosion protection after 168 h of immersion in the very acidic environment used.     

不同添加剂对SrAl2O4:(Eu,Dy)磷光体发光性能的影响

在较低的温度下用燃烧合成法快速合成了 Eu2 ,Dy3 掺杂的SrAl2O4长余辉磷光体发光材料.研究了P2O5,CaF2,H3BO3,NaF 几种添加剂对SrAl2O4:(Eu,Dy)粉体发光性能的影响.结果发现:H3BO3和P2O5的添加有利于改善磷光体的发光性能,而在配料中加入CaF2和NaF,磷光体发光效率降低.随着这几种添加剂的加入,SrAl2O4:(Eu,Dy)磷光体材料发射光谱的主发射峰不同程度的出现蓝移.根据实验结果分析了添加剂的作用机理.