Effect of lower-body positive pressure on postural fluid shifts in men

Summary To quantify the effect of 60 mm Hg lower-body positive pressure (LBPP) on orthostatic blood-volume shifts, the mass densities (±0.1 g· l^–1) of antecubital venous blood and plasma were measured in five men (27–42 years) during combined tilt table/antigravity suit inflation and deflation experiments. The densities of erythrocytes, whole-body blood, and of the shifted fluid were computed and the magnitude of fluid and protein shifts were calculated during head-up tilt (60°) with and without application of LBPP. During 30-min head-up tilt with LBPP, blood density (BD) and plasma density (PD) increased by 1.6±0.3 g · l^–1, and by 0.8±0.2 g · l^–1 (±SD) (N=9), respectively. In the subsequent period of tilt without LBPP, BD and PD increased further to +3.6±0.9 g · l^–1, and to +2.0±0.7 g · l^–1 (N=7) compared to supine control. The density increases in both periods were significant (p<0.05). Erythrocyte density remained unaltered with changes in body position and pressure suit inflation/deflation. Calculated shifted-fluid densities (FD) during tilt with LBPP (1006.0±1.1 g · l^–1,N=9), and for subsequent tilt after deflation (1002.8±4.1 g · l^–1,N=7) were different from each other (p<0.03). The plasma volume decreased by 6.0±1.2% in the tilt-LBPP period, and by an additional 6.4±2.7% of the supine control level in the subsequent postdeflation tilt period. The corresponding blood volume changes were 3.7±0.7% (p<0.01), and 3.5±2.1% (p<0.05), respectively. Thus, about half of the postural hemoconcentration occurring during passive head-up tilt was prevented by application of 60 mm Hg LBPP.H. Hinghofer-Szalkay was a European Space Agency fellow on leave from the Physiological Institute, Karl-Franzens-University, A-8010 Graz, Austria.     

Computer-controlled mechanical lung model for application in pulmonary function studies

A computer controlled mechanical lung model has been developed for testing lung function equipment, validation of computer programs and simulation of impaired pulmonary mechanics. The construction, function and some applications are described. The physical model is constructed from two bellows and a pipe system representing the alveolar lung compartments of both lungs and airways, respectively. The bellows are surrounded by water simulating pleural and interstitial space. Volume changes of the bellows are accomplished via the fluid by a piston. The piston is driven by a servo-controlled electrical motor whose input is generated by a microcomputer. A wide range of breathing patterns can be simulated. The pipe system representing the trachea connects both bellows to the ambient air and is provided with exchangeable parts with known resistance. A compressible element (CE) can be inserted into the pipe system. The fluid-filled space around the CE is connected with the water compartment around the bellows; The CE is made from a stretched Penrose drain. The outlet of the pipe system can be interrupted at the command of an external microcomputer system. An automatic sequence of measurements can be programmed and is executed without the interaction of a technician.     

Effects of Creep and Cyclic Loading on the Mechanical Properties and Failure of Human Achilles Tendons

The Achilles tendon is one of the most frequently injured tendons in humans, and yet the mechanisms underlying its injury are not well understood. This study examines the ex vivo mechanical behavior of excised human Achilles tendons to elucidate the relationships between mechanical loading and Achilles tendon injury. Eighteen tendons underwent creep testing at constant stresses from 35 to 75 MPa. Another 25 tendons underwent sinusoidal cyclic loading at 1 Hz between a minimum stress of 10 MPa and maximum stresses of 30–80 MPa. For the creep specimens, there was no significant relationship between applied stress and time to failure, but time to failure decreased exponentially with increasing initial strain (strain when target stress is first reached) and decreasing failure strain. For the cyclically loaded specimens, secant modulus decreased and cyclic energy dissipation increased over time. Time and cycles to failure decreased exponentially with increasing applied stress, increasing initial strain (peak strain from first loading cycle), and decreasing failure strain. For both creep and cyclic loading, initial strain was the best predictor of time or cycles to failure, supporting the hypothesis that strain is the primary mechanical parameter governing tendon damage accumulation and injury. The cyclically loaded specimens failed faster than would be expected if only time-dependent damage occurred, suggesting that repetitive loading also contributes to Achilles tendon injuries. © 2003 Biomedical Engineering Society. PAC2003: 8719Rr     

一种测量牙松动度的新方法

本文是出了一种客观确定牙松动的新方法。用瞬态碰撞激震测定牙固有振动半周期Ｔ／２和减幅系数η。以Ｔ／２为主，η为辅，度量牙齿的松动度。对依据的原理从牙周动力学模型出发进行了严密的数学推导；讨论了测试方案；介绍了牙模型测试实验；最后给出实际状态下测试的初步结果。     

Sensitivity to mechanical stimuli and the role of general sensory and perceptual processes in heartbeat detection

Sensitivity to heartbeat sensations is commonly assessed using tasks that require individuals to judge the simultaneity of heartbeats and tones. In two experiments, we investigated the suitability of this paradigm for examining cardioception. In the first experiment, participants judged the simultaneity of near–threshold vibrations and suprathreshold tones. Precision in judging vibration–tone simultaneity was directly related to the detectability of the mechanical stimuli, thereby supporting use of the simultaneity paradigm to assess heartbeat detection. In the second experiment, we examined the influences of sensitivity to mechanical stimuli and the ability to make intermodality simultaneity judgments on the precision of heartbeat detection. We measured participants' vibrotactile thresholds, precision in judging light–tone simultaneity, and precision in judging heartbeat–tone simultaneity. The ability to judge the simultaneity of lights and tones accounted for 24.3% of the variance in precision of heartbeat detection, and mechanical sensitivity accounted for a further 8.5%.     

Energy cost and mechanical efficiency of riding a four-wheeled, human-powered, recumbent vehicle

Oxygen consumption at steady state (V˙O ₂, l · min⁻¹) and mechanical power (W˙, W) were measured in five subjects riding a human-powered vehicle (HPV, the Karbyk, a four-wheeled recumbent cycle) on a flat concrete road at constant sub-maximal speeds. The external mechanical work spent per unit of distance (W, J · m⁻¹), as calculated from the ratio of W˙ to the speed (v, m · s⁻¹), was found to increase with the square of v: W˙=8.12+(0.262 ·v ²) (r=0.986, n=31), where the first term represents the mechanical energy wasted, over a unit of distance, against frictional forces (rolling resistance, R_r), and the second term (k · v ²) is the work performed, per unit distance, to overcome the air drag. The rolling coefficient (C_r, obtained dividing R_r by m · g, where m is the overall mass and g is the acceleration of gravity) amounted to [mean (SD)] 0.0084 (0.0008), that is about 60% higher than that of a racing bicycle. The drag coefficient was calculated from the measured values of k, air density (ρ) and frontal area (A) [C_x=k · (0.5 · A · ρ)⁻¹], and amounted to 1.067 (0.029), that is about 20% higher than that of a racing bicycle. The energy cost of riding the HPV (C_k, J · m⁻¹) was measured from the ratio of metabolic power above rest (net V˙O ₂, expressed in J · s⁻¹) to the speed (v, m · s⁻¹); the value of this parameter increased with the square of v, as described by: C_k=61.45 + (0.675 · v ²) (r=0.711, n=23). The net mechanical efficiency (η) was calculated from the ratio of W to C_k: over the investigated speed range this turned out to be 0.22 (0.021). Best performance times (BPTs) of a “typical”élite athlete riding the Karbyk were calculated over the distances of 1, 5 and 10 km: these were about 8% longer than the BPTs calculated, on the same subjects, when riding a conventional racing bicycle. Accepted: 7 August 2000     

Kappa Delta Award paper. Osteoregulatory nature of mechanical stimuli: function as a determinant for adaptive remodeling in bone

The capacity for functional adaptation within the skeleton was studied using the functionally isolated turkey ulna preparation. The results of this study would suggest that adaptive bone remodeling is extremely sensitive to alterations in both the magnitude and distribution of the strain generated within the bone tissue. At present, it appears that a loading regime can only influence bone remodeling when it is dynamic in nature. The full osteogenic potential of its influence is then achieved after only an extremely short exposure to this stimulus. The potency of the stimulus appears to be proportional to the magnitude of the strain engendered. As strain levels that are acceptable in one location induce adaptive remodeling in others, it would appear that each region of each bone is "genetically programmed" to accept a particular amount and pattern of intermittent strain as "normal." Deviation from this "optimal strain environment" will stimulate changes in the bone's remodeling balance, resulting in adaptive increases or decreases in its mass.     

机械通气下应用肺表面活性物质治疗新生儿肺炎合并呼吸衰竭的疗效

目的：探讨新生儿肺炎合并呼吸衰竭治疗中机械通气下应用肺表面活性物质的疗效。方法：回顾性选取2017年2月至2022年2月无锡市儿童医院新生儿科收治的新生儿肺炎合并呼吸衰竭患儿80例,依据治疗方法分为机械通气下应用肺表面活性物质治疗组(观察组)、机械通气治疗组(对照组)两组,各40例。分析两组患儿血气指标、平均动脉压(MAP)和呼吸力学指标、机械通气时间、总吸氧时间、住院时间、并发症发生情况之间的差异。结果：治疗前,两组患儿的动脉血氧分压(PaO₂)、氧合指数(PaO₂/FiO₂)、动脉血二氧化碳分压(PaCO₂)、氢离子浓度指数(pH)、MAP、呼气末正压(PEEP)、平台压(Pplat)、气道峰压(PIP)之间比较,差异均无统计学意义(P> 0.05);治疗后,两组患儿的PaO₂、PaO₂/FiO₂均高于治疗前,PaCO₂、MAP、PEEP均低于治疗前,差异均具有统计学意义(P <0.05),但治疗...     

Emergence of SARS-CoV-2 B.1.1.7 Lineage at Outpatient Testing Site,Berlin, Germany,January–March 2021

Within 5 weeks in 2021, B.1.1.7 became the dominant severe acute respiratory syndrome coronavirus 2 lineage at an outpatient testing site in Berlin, Germany. Compared with outpatients with wild-type virus infection, patients with B.1.1.7 had similar cycle threshold values, more frequent sore throat and travel history, and less frequent anosmia/ageusia.     

生物安全实验室通风空调系统节能措施探讨

以某生物安全实验室典型核心工作间为例,阐述了其负荷情况。并结合笔者单位近两年检测的28个生物安全三级实验室项目中的98间核心工作间,分析了换气次数的分布频次与室内洁净度的关系,探讨了高等级生物安全实验室的节能措施。