Functional and sensory properties of chicken meat from spent-hen carcasses deboned manually or mechanically in Jordan

Samples of chicken meat from spent laying hens were obtained by four different methods: (1) manual deboning of whole carcasses; (2) manual deboning of skinned carcasses; (3) mechanical deboning of whole carcasses; and (4) mechanical deboning of skinned carcasses. The meat was packaged, frozen and stored at ?18 °C for up to 3 months. Functional properties studied were pH, emulsifying capacity (EC) and water‐holding capacity (WHC) and, in addition, pigment concentration was investigated. Sensory properties included aroma, colour, texture and overall acceptability, as judged by a trained panel using a nine‐point hedonic scale. Removal of the skin prior to deboning by either method gave significantly higher values (P < 0.05) for EC, while WHC values were not significantly different among the experimental treatments, despite higher pH values for mechanically‐deboned meat, with and without skin. Pigment concentrations were highest in meat from Treatment 4 and lowest for Treatment 1, but values for both methods of deboning were affected by the presence of skin. There were no significant differences between treatments for any of the sensory properties studied. Changes occurring in the meat during frozen storage are described.     

Biosorption of heavy metals by Saccharomyces cerevisiae: Effects of nutrient conditions

Studies took place to investigate the effects of different nutrient conditions on the biosorption ability and selectivity of heavy metals by Saccharomyces cerevisiae. After having grown in media supplemented with additional glucose, ammonium, phosphate or cysteine, the yeast was exposed to an equimolar solution of lead, cadmium, zinc and copper. Lead removal from a mixed solution was significantly higher than that of copper, followed by zinc and cadmium. Generally, yeasts from cysteine-rich media showed greatest sorption capacity whereas phosphate addition influenced zinc selectivity. In addition, glucose, fructose and sucrose as carbon sources were examined. Cultures grown in glucose had a better uptake than those cultivated with fructose at an incubation time of 30 min.     

Evaluation of Serum Volume Losses During Long-Term Storage

Aliquots of serum collected in a large case-control study of cervical cancer were stored at −70°C for up to 4 years during implementation of the study. When 500 μL serum aliquots were thawed in preparation for carotenoid and vitamin A assays, volumes were noticeably variable and fell below 500 μL in the majority of the samples. We were concerned about evaporation/sublimation during storage of the samples because loss of water would concentrate the analytes of interest. We evaluated the use of density and sodium ion concentration measurements to confirm its occurrence. We found that serum density was an unreliable indicator of extent of volume loss since the anticipated increases in density due to evaporation were of the same magnitude as inter-individual variation in serum density. In contrast, Na⁺ concentration is tightly regulated and would rise if water had been lost from the samples. In a representative sample of serum aliquots from the case-control study, 24 of 25 vials contained less than 500 μL of serum. The mean sodium ion concentration (138.1 ± 3.6 mmol/L) was within the normal range for human serum of 136–145 mmol/L, and no correlation was observed between serum volume and Na⁺ concentration. These results strongly suggest that the observed low volumes were not due to evaporative losses. Instead, the variably low volumes of serum aliquots were probably due to pipetting errors in the initial aliquotting resulting from the use of air-displacement pipettes.     

Explosion risks during the confined storage of bituminous coals : Calculation of gaseous hydrogen accumulation in ship holds

Bituminous coal piles stored in the open air can undergo autocatalytic heating accompanied by the emission of small but appreciable amounts of molecular hydrogen. When the coal is contained in a confined space and the temperature reaches 40°C, accumulation of hydrogen is expected. This process has been observed for a wide variety of bituminous coals. The amount of hydrogen gas expected to accumulate in the air pocket above the coal cargo in ship holds (assuming that the coal's temperature approaches 40°C during the voyage) has been calculated. The results clearly indicate that in most cases the hydrogen concentration will be appreciably above the lower explosion limit in air. Hence when bituminous coals are stored in a confined space (e.g. a ship hold), the explosive risk of hydrogen should be taken into account.     

十万立方米储罐用高强钢SPV490Q的冬季焊接施工

通过对高强钢焊接性能的分析 ,提出了高强钢冬季焊接施工带来的问题及处理办法。可靠的焊前预热和焊后保温是确保冬季焊接施工质量的关键措施     

水泵水轮机的数值模拟及其应用

采用足够小的直线段拟合机组全特性曲线平直部分，采用二次多项式拟合机组全特性曲线弯曲部分，推导了有关方程，并对模拟的方程进行了处理，编制了较通用的计算机程序，利用该计算机程序对我国蒲石河抽水蓄能电站进行了计算分析，计算结果表明：该计算机程序计算速度较快、计算准确度较高，提出的水泵水轮机的数值模拟方法具有实用价值．     

皮革加油原理及注意事项

本文从乳液出发，阐述乳液形成，稳定，破乳以及皮革加油过程。要求使用最少的油剂达到最佳的目的。     

响洪甸电站引水隧洞进口水下岩塞爆破施工

响洪甸抽水蓄能电站水下岩塞爆破施工要求高,技术新,难度大.由于施工准备充分,并进行了一系列材料及施工试验,工程进展顺利,排孔造孔、导洞药室开挖、药管与起爆体加工、装药与堵塞、网络施工、充水补气等工程施工质量符合设计要求,岩塞爆破准时成功起爆.     

Thermal characteristics of packed bed storage system

The thermal behaviour of a packed bed storage system charged with hot air is modelled using two partial differential equations representing the energy conservation in the air and solid phases constituting the bed. These two equations are coupled through the heat exchange process between the two phases. A fully implicit numerical scheme based on forward, upwind and central differencing for the time, first and second space derivatives, respectively, is used to solve the modelling equations. Marching technique is used for the air equation and a tri-diagonal matrix solver is employed to solve the solid equation. The solution yields the thermal structure of the bed, namely the air and solid temperature distribution inside the bed at any particular time, and the variation of total energy stored in the bed with time. The effect of bed length, solid diameter and void fraction on the thermal characteristics of the packed bed is studied. Further, the performance of the bed under variable inlet air temperature and mass flow rate is investigated.