高性能水泥基材料及其精细制品的发展

高性能水泥基材料及其精细制品已成为当代胶凝亲的重要研究方向，本文介绍了该方向理论研究与技术研究取得的主要进展，并对其涵义、研究内容及发展进行了探讨。     

我国甲烷氯化物产品成本核算规程的探讨

从核算规程修改的原理、原则及内容等方面对甲烷氯化物产品成本核算规程的修改、规范和完善情况进行了介绍。     

Quantitation of volatile compounds in heated triolein by static headspace capillary gas chromatography/infrared spectroscopy-mass spectrometry

Static headspace and capillary gas chromatography/infrared spectroscopy-mass spectrometry were used to collect, separate, identify and quantitate the oxidative and thermal decomposition products in heated triolein. Approximately 4 L of triolein was heated in a deep-fat fryer at 190°C for 12 h each day for a total of 60 h, until it contained>-20% polymeric material. The concentration of heptane and octane increased after 12 h heating, then decreased upon further heating, while the concentration of volatile aldehydes decreased gradually during heating. After 12 h of heating, the concentrations of the major volatiles changed as follows: heptane (16.36 to 30.17 ppm), octane (24.48 to 40.77 ppm), heptanal (21.68 ppm to 9.11 ppm), octanal (35.53 to 36.64 ppm), nonanal (68.95 to 43.16 ppm), (E)-2-decenal (135.00 to 89.00 ppm) and (E)-2-undecenal (88.50 to 61.00 ppm). After 60 h of heating, when the oil contained over 20% polymeric material, the concentrations of heptane, octane, heptanal, octanol, nonanal, (E)-2-decenal and (E)-2-undecenal were 5.16, 4.39, 5.45, 7.02, 18.07, 12.50 and 6.00 ppm, respectively.     

中国聚氯乙烯下游应用现状及发展趋势

介绍了当前中国聚氯乙烯行业下游总体运行状况,并从PVC管道、异型材、地板、木塑墙板、软质膜等聚氯乙烯下游产品阐述了下游制品发展现状及特点。     

无水硫酸氢钾催化合成3-烷氧基噻吩

以CuBr为催化剂,N-甲基-2-吡咯烷酮为溶剂,在110℃用3-溴噻吩与过量的甲醇钠进行取代反应合成3-甲氧基噻吩,收率为82.3%。再以无水KHSO4为催化剂,3-甲氧基噻吩分别与乙醇、丙醇、丁醇、戊醇、己醇和辛醇在105~115℃反应2.5、2.5、3、3.5、3.5和3.5h,合成了3-乙氧基噻吩、3-丙氧基噻吩、3-丁氧基噻吩、3-戊氧基噻吩、3-己氧基噻吩和3-辛氧基噻吩,收率分别为75.8%、73.5%7、0.4%、68.7%、66.3%、55.3%。这些化合物结构都通过IR1、HNMR和MS进行了表征,还进行了初步香味评价。结果表明它们都具有基本肉香味的特征。     

乙烯的综合利用

乙烯是重要的有机化工原料，它广泛应用于树脂、纤维、有机化学品等领域，主要用于合成聚乙烯、乙苯、环氧乙烷、二氯乙烷、α-烯烃、直链伯醇、醋酸乙烯酯、乙醇、乙酸等。本文系统全面地论述了以乙烯为原料合成下游产品的技术路线及其最新技术进展，并详细介绍了乙烯下游产品的应用情况和发展趋势。     

Alkali release characteristics of blended cements

This paper presents results of an experimental program conducted to investigate the capacity of hydration products of different cementing materials to retain “bound” alkalis when the alkalinity of the surrounding solution drops. The study covered paste samples containing high-alkali Portland cement and various levels of silica fume and/or fly ash. The results showed that the ability of the hydration products of cement-fly ash systems to bind alkalis is a function of the CaO content of the fly ash, the binding increasing as the calcium content decreases. High-alkali fly ashes (Na₂O_e > 5.0% and CaO in the range of 15% to 20%) showed considerable amounts of alkali contributed to the test solutions. Silica fume does not have a high capacity to retain alkalis in its hydration products; however, ternary blends containing silica fume and fly ash have excellent capacity to bind and retain alkalis.     

汽车用橡胶制品的发展

介绍了橡胶制品应用于汽车中的现状，统计了各种汽车中的橡胶用量、汽车橡胶制品使用的胶种及比例、世界汽车年产量，橡胶消耗量，轮胎生产量及世界前30名橡胶制品企业销售额。对汽车用橡胶制品的特点及发展趋势作了较系统的介绍。     

Reaction products of ammonium nitrate phosphate fertilizers of varying water-soluble phosphorus content in different Indian soils

Studies were undertaken on the isolation and identification of reaction products of ammonium nitrate phosphate (ANP) fertilizers containing 30, 50 and 70 per cent water-soluble phosphorus (WSP) of total phosphorus in representative soils of the vertisol, oxisol, alfisol, entisol, mollisol and aridisol groups of India. ANP fertilizers were applied in solid form to soil, and reaction products formed at and around the site of ANP fertilizer placement were identified after six weeks incubation in moist soils by X-ray diffraction technique. DCPD (dicalcium phosphate dihydrate- CaHPO₄ · 2H₂O) was the major reaction product of ANP fertilizers containing 30 and 50 per cent WSP in vertisol, entisol, aridisol, mollisol, oxisol and alfisol, and of ANP containing 70 per cent WSP in vertisol, entisol, alfisol, aridisol and mollisol. DCP (dicalcium phosphate-CaHPO₄) was detected with ANP of 30 and 50 per cent WSP in the vertisol, alfisol, entisol, mollisol and aridisol groups of soils. In addition to DCPD, FePO₄ · 2H₂O (metastrengite) and AlPO₄ · 2H₂ O-monoclinic (metavariscite) were formed in alfisol and oxisol soils with ANP of 30 and 50 per cent WSP. FePO₄ · 2H₂O and AlPO₄ · 2H₂O (metavariscite) were identified in alfisol and oxisol soils while AlPO₄ · 2H₂O-orthorhombic (variscite) was formed in alfisol soils with ANP of 70 per cent WSP.     

Direct Ink-Jet Printing of Vertical Walls

Direct jet printing can assemble ceramic powder into a three dimensional shape by firing droplets of ink through a nozzle to build a multiple layered structure. As with stereolithography and selective laser sintering, the surface texture is expected to witness the layered assembly. The ability to create vertical walls by direct ink-jet printing was explored using a test piece based on a maze. The structure and topography are discussed in terms of droplet spreading and drying.