RB40钢结硬质合金热镦模复合强化处理的研究

选用RB40钢结硬质合金新型工程材料制造热镦螺栓开式镦模,进行了锻造和复合强化热处理,试验表明,采用RB40钢结硬质合金代替3Cr2W8V,模具寿命提高20～25倍.     

硅钨酸在催化合成酯类和缩醛(酮)中应用研究进展

介绍了硅钨酸及固载硅钨酸在酯化反应和缩醛(酮)反应中的应用情况，并对硅钨酸固载前后催化剂在同一酯化反应和缩醛(酮)反应中的催化活性进行了比较，结果表明固载硅钨酸催化剂的重复使用性能好，具有良好的应用前景。     

磷钨钼杂多酸掺杂聚苯胺催化合成丁醛乙二醇缩醛

报道了以磷钨钼杂多酸掺杂聚苯胺为催化剂,通过丁醛和乙二醇反应合成了丁醛乙二醇缩醛。系统考察了醛醇物质的量比、催化剂用量以及反应时间诸因素对产品收率的影响。确定适宜的工艺条件为n(丁醛)∶n(乙二醇)=1∶1.5,催化剂的质量为反应物料总质量的0.8%,反应时间1.0 h。在此反应条件下,丁醛乙二醇缩醛的收率可达71.1%。     

LHRH-PE40的免疫原性及其抗体对细胞毒作用的影响

目的观察连续静脉注射重组毒素LHRH-PE40所引起的家兔抗LHRH-PE40抗体产生的规律以及该抗体对细胞毒作用的影响。方法将家兔分为3组,第1组隔日连续静脉注射LHRHPE40,第2组用弗氏佐剂乳化的LHRHPE40皮下注射为阳性对照组,第3组静脉注射人血白蛋白为阴性对照组。用ELISA检测血清中的抗体水平,XTT检测LHRH-PE40与血清中和后对Hela细胞的细胞毒作用。结果抗LHRHPE40抗体水平随静脉注射时间的延长而升高,8d可以检测到抗LHRH-PE40抗体,在24d基本达到最高水平。血清中和后LHRHPE40对Hela细胞的半数抑制量较阴性血清提高1～2倍,而阳性血清较阴性血清提高14倍。结论连续静脉注射LHRH-PE40产生较低水平的抗体,这种抗体未造成LHRHPE40对Hela细胞半数抑制量产生严重影响,这为临床连续使用LHRH-PE40提供了依据。     

H4SiW12O40-PAn催化剂催化合成苯甲醛乙二醇缩醛

报道了以自制的H4SiW12 O40 (硅钨酸 ) -PAn (聚苯胺 )为催化剂 ,通过苯甲醛和乙二醇为原料合成了苯甲醛乙二醇缩醛。实验表明 :合成苯甲醛乙二醇缩醛适宜反应条件为 :n(苯甲醛 ) /n(乙二醇 ) =1 /2 .0 ,催化剂用量为反应物料总质量的 1 .0 % ,环己烷为带水剂 ,反应时间 1 .0h。上述条件下 ,苯甲醛乙二醇缩醛的收率可达 86.7% .     

Properties of palm-oil-in-water emulsions: Effect of mixed emulsifiers

Palm-oil-in-water emulsions were prepared with mixtures of Tween 40 and Span 40 in various proportions. Stability and droplet-size distribution of the emulsions were monitored. Interfacial tensions of the palm oil/water interface were also determined in the presence of these emulsifier mixtures. Emulsifying efficiency of the emulsifier mixtures was assessed. No synergistic effect of Tween 40 (sorbitan monopalmitate with 18–22 moles of ethylene oxide) and Span 40 (sorbitan monopalmitate) was found on interfacial tension. Tween 40 alone (hydrophilic-lipophilic balance value 15.6) at 1.0% w/w gave palm oil emulsions that were stable for more than 30 d at 60°C. Emulsifier mixtures of Tween 40 and Span 40 with hydrophilic-lipophilic balance values in the range of 8.0–8.6 produced stable emulsions only at much higher emulsifier-mixture concentrations. The inherent nature of the oil and the accompanying natural surface-active materials present in the oil can influence the prevailing conditions at the oil/water interface and alter composition of the interfacial film and hence its stability.     

Advancements in the design and validation of an air pollution integrated assessment model for Spain

This paper describes the design and application of the Atmospheric Evaluation and Research Integrated model for Spain (AERIS). Currently, AERIS can provide concentration profiles of NO₂, O₃, SO₂, NH₃, PM, as a response to emission variations of relevant sectors in Spain. Results are calculated using transfer matrices based on an air quality modelling system (AQMS) composed by the WRF (meteorology), SMOKE (emissions) and CMAQ (atmospheric-chemical processes) models. The AERIS outputs were statistically tested against the conventional AQMS and observations, revealing a good agreement in both cases. At the moment, integrated assessment in AERIS focuses only on the link between emissions and concentrations. The quantification of deposition, impacts (health, ecosystems) and costs will be introduced in the future. In conclusion, the main asset of AERIS is its accuracy in predicting air quality outcomes for different scenarios through a simple yet robust modelling framework, avoiding complex programming and long computing times.     

17O MAS NMR study of 12-molybdophosphoric acid

¹⁷O MAS NMR spectra for¹⁷O enriched solid heteropoly acid H₃PMo₁₂O₄₀ are reported. The oxygen exchange between solid H₃PMo₁₂ ¹⁷O₄₀ and H₂ ¹⁶O vapor at 200–250°C is shown to be accompanied by fast mixing of terminal Mo=O and bridging Mo-O-Mo oxygens in the Keggin unit. The oxygen exchange in H₃PMo₁₂ ¹⁷O₄₀ is much faster than in H₃PW₁₂ ¹⁷O₄₀ in solution as well as in the gas phase.     

磷钨钼杂多酸催化合成环己酮乙二醇缩酮

以H3PW6Mo6O40为催化剂，对以环己酮与乙二醇为原料合成环己酮乙二醇缩酮的反应条件进行了研究，较系统地研究了酮醇物质的量比、催化剂用量、反应时间对收率的影响。实验结果表明，在n（环己酮）：n（乙二醇）=1．0：1．5，催化剂用量占反应物料总质量的0．8％，反应时间0．75h，带水剂环己烷8mL的条件下，环己酮乙二醇缩酮的收率为84.9％。     

葡聚糖修饰漆酶的制备及其催化特性和稳定性

将经NaIO₄氧化处理的葡聚糖（500×10³）连接在漆酶分子上以提高漆酶在酸性溶液环境中的稳定性。HPLC和SDS-PAGE分析表明葡聚糖修饰漆酶的分子量在200×10³以上。荧光光谱和圆二色性光谱分析表明修饰漆酶保持了天然漆酶的三级和二级结构。酶催化反应显示修饰漆酶与天然漆酶具有类似的底物亲和性和催化活性，而其在酸性条件下的稳定性显著提高。通过葡聚糖修饰使得漆酶在pH 3,50℃下的酶活半衰期从0. 07 h提高到17. 1 h，在含30%（体积）乙腈, pH 3下的酶活半衰期从0. 11 h提高到10. 3 h。在不同pH下测定修饰漆酶在216 nm处的圆二色性光谱，结果显示偶联葡聚糖增强了漆酶分子的结构稳定性，提高了其在高温及有机溶剂存在下的催化活性。