Research and Design of Network Management Construction Based on Mobile AGENT

The technical characters of mobile agent （MA） originated in the distributional artificial intelligence domain is introduced. A network management construction based on agent （NMCA） is then proposed. The NMCA structure features are elaborated in detail. A prototype design of NMCA is given by using the jKQML programming. The establishment of NMCA platform will be helpful to reduce the correspondence load of network management and improves the efficiency and the expansion ability of network management systems.     

Synthesis and Evaluation of Blends Formed by Polymeric Crown Ethers and a Fullerene-Containing Primary Ammonium Salt in Organic Thin Films

The synthesis of a series of polymers and cyclopolymers bearing crown ethers of differing structure and affinities towards primary ammonium ions is discussed. These polymers have been tested in their efficiency to form structurally homogeneous thin films when blended with an amphiphilic C₆₀ compound containing a primary ammonium ion functional group. The X-ray reflectivity characterization of the films revealed that the polymer bearing the crown ether with the least affinity for primary ammonium ions, but having the highest degree of polymerization, is the most effective in forming structurally homogeneous thin films.     

酸化返出液中分离出的原油脱水时电脱水器跳闸原因及对策

海上油井酸化后,油井返排液沉降分离得到含酸原油,后者进入电脱水器后常引起电脱水器跳闸。其原因是含酸原油(油包水型乳状液)的电导率过高,超过了电脱水器的安全工作电导率κw。对于现场所用的电脱水器,由设计参数计算出κw=0.43μS/cm。从某海上油田3口油井酸化后不同时间的返排液共取样40份,随机选出13份,沉降分离后得到13份含酸原油样,测得电导率范围在0.03～10000μS/cm。认为原油的含水率(应<18%)不是引起跳闸的原因,跳闸的主因是含酸原油的高电导率。研制了一种油溶性的碱性添加剂,其化学成份是碱金属、碱土金属氧化物或氢氧化物,以浓溶液形式加入含酸原油中,可使电导率降至κw以下。加入量由实验确定。表2参2。     

真空钙热还原炉渣的综合利用研究

研究了从真空钙热还原炉渣中回收稀土的工艺条件；采用本工艺得到的合格稀土溶液，其回收率达65．41％；副产品氟化钙用作炼硅铁合金的助熔剂，使钙热还原炉渣得到综合利用。     

动力配煤高温复合固硫剂研究

分析了高温复合固硫剂各成分的作用，实验研究了在不同配比的燃烧试验下，各成分对燃煤着火和燃烧以及对炉渣固硫的影响，得出了该煤种高温复合固硫剂的最佳配方。     

Ideally selective diisocyanate building blocks: New perspectives for dendrimers and coating binders

Using zirconium (IV) salts as catalyst, the reaction of a diisocyanate carrying one tertiary and one primary isocyanate group (IMCI, DIMP) with alcohols can be conducted with complete regioselectivity. This unique selectivity enables the use of a diisocyanate building block in unprecedented ways. Incomplete regioselectivity of diisocyanates, as commonly encountered in currently commercial ones like IPDI and TDI, inevitably leads to polydisperse products in reaction with polyols. The ultimate monodisperse polymer architecture, dendrimers, can now be made in a facile, straightforward manner using IMCI as the ideal diisocyanate building block. Coating applications of this unique building block are not restricted to these perfect branching polymers, but also include isocyanate-functional coating resins. Without any increase in polydispersity, a hydroxyl-functional polyester can be end-capped with the IMCI diisocyanate and subsequently serve as a crosslinker in powder coatings.     

移动式数据挖掘平台模型

本文提出了一种移动式网络海量数据挖掘平台，给出了数据挖掘任务的形式化描述，详细讨论了平台的体系结构、工作原理与流程。该平台克服了传统网络计算模式的缺陷，支持对异质、分散数据源和知识源的挖掘和检索，具有开放性、可伸缩性、灵活性、可扩展性、健壮性。     

基于多代理技术的传感器管理系统

针对分布式对空监视网中混合式传感器管理结构存在的问题，提出了基于多代理技术的混合式传感器管理结构。该结构较好地克服了混合式管理结构中在融合中心存在的瓶颈问题，通过多个传感器代理、融合中心代理之间的相互协商来实现传感器任务的分配。传感器代理与传感器相结合使传感器的工作模式实现高度的自动化和模块化，便于传感器的灵活组网。     

In situ polymerization and characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nano‐silica composites were obtained via in situ polymerization and investigated by Fourier‐transform infrared spectroscopy (FTIR), or FTIR coupled with attenuated total reflectance (FTIR‐ATR), Transmission electron microscopy (TEM), atomic force microscopy (AFM), an Instron testing machine, dynamic mechanical analysis (DMA) and ultraviolet‐visible spectrophotometry (UV‐vis). FTIR analysis showed that in situ polymerization provoked some chemical reactions between polyester molecules and nano‐silica particles. FTIR‐ATR, TEM and AFM analyses showed that both surface and interface contained nano‐silica particles. Instron testing and DMA data showed that introducing nano‐silica particles into polyurethane enhanced the hardness, glass temperature and adhesion strength of polyurethane to the substrate, but also increased the resin viscosity. UV‐vis spectrophotometry showed that nano‐silica obtained by the fumed method did not shield UV radiation in polyurethane films. Copyright © 2003 Society of Chemical Industry     

Surface structural change of ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V cathode materials at elevated temperatures

LiNi_0.5Mn_1.5O₄ powder was synthesized via sol-gel method and coated with ZnO in order to test the electrochemical cyclability of the material as a cathode for the secondary Li battery in the 5 V range at 55 °C. The ZnO-coated LiNi_0.5Mn_1.5O₄ powder nearly maintained its initial capacity of 137 mA h g⁻¹ after 50 cycles whereas the uncoated powder was able to retain no more than 10% of the initial capacity after 30 cycles. TEM analysis of the cycled cathodes suggests that the formation of the graphitic surface phase, hindering the Li migration, may be responsible for the rapid capacity loss of the uncoated material while no such phase was observed on the surface of the ZnO coated LiNi_0.5Mn_1.5O₄ powder.