International legislation on trace elements as contaminants in food: a review

Environmental contaminants such as trace elements may be present in all foods. Foods, raw materials and ingredients for food production are to an increasing extent traded across borders. Hence, there is a need for international legislation on trace elements as contaminants in food. In 1961, the FAO and WHO established the Codex Alimentarius to elaborate international food legislation. Contaminants in food are handled by the Codex Committee for Food Additives and Contaminants (CCFAC). The Codex Alimentarius system for developing legislation concerning trace elements as contaminants in food is based upon the Codex General Standard for Contaminants and Toxins in Food (GSCTF). By October 2001, the principles for setting maximum limits (MLs) for contaminants in food are agreed, and work is in progress on MLs for trace elements such as lead and cadmium in the various food categories. The status for the proposals is presented and discussed. The EU Regulation 466/2001 of 8 March 2001 sets MLs for lead and cadmium in various foods. This regulation will apply from 5 April 2002. The EU regulation is more detailed but similar to the Codex draft standards for lead and cadmium in food. In future, legislators and administrators in the Codex and EU and analytical chemists will discuss how to use more and better analytical data as risk-management tools to protect public health. Trace elements' speciation is an important aspect of this discussion.     

Validation of a Method of Determination of Apparent Diffusivity Versus Composition in Solids

A method is presented for computing the values of apparent diffusivity in solids with respect to the concentration of the diffusing substance (water or sodium chloride). This method does not require any assumption upon the mathematical relationship between diffusivity and concentration. It can be applied to experimental measurements of local concentration versus position within the solid (profiles) with relatively few measurements (circa 10) and a mathematical smoothing of the experimental data by using an artificial neural network model. The method was first validated on simulated data obtained by using a constant diffusivity value and on experimental profiles when the relation between diffusivity and concentration was given. It was then applied to original experimental moisture profiles obtained by putting gelatin gels with different initial moisture contents into contact for up to 14 days. The method was also successfully applied to five sets of experimental moisture and sodium chloride profiles taken from the literature and obtained from different food products. Apparent diffusivities calculated by our method were found in agreement with those obtained by authors using different numerical methods to compute the diffusivity values.     

The use of natural essential oils as antimicrobial solutions in paper packaging. Part II

We have assessed the antimicrobial, vapor-phase activity of the following natural essential oils (EOs) when used in paraffin-based “active coatings” for paper packaging materials intended to come into contact with foods: clove (Sygzium aromaticum), cinnamon (Cinnamomum zeylanicum), and oregano (Origanum vulgare) EOs, and cinnamaldehyde-enriched cinnamon EO. To our knowledge, this is the first time that such an approach has been presented for consideration by the scientific community.     

Stickiness, Functionality, and Microstructure of Food Powders

Three major aspects of food powder are described and discussed. Stickiness is one issue that can cause production and product handling difficulties. Stickiness has been interpreted in a number of ways and thus measured differently. Functionality of the primary (single) particles or agglomerated powders is of practical interest to the consumers. The desired quality will have to be matched or exceeded by the powder manufacturers. Finally, microstructure provides a key linkage between the production and the functionality. Its formation has impacts on both the stickiness and functionality.     

Process optimisation in sunflower oil extraction by supercritical CO2

A continuous process for the extraction of sunflower oil using supercritical CO₂, featuring multiple extractors, one oil separator and three cascaded CO₂ recovery vessels operating at different pressures, was devised and studied. For every single equipment of the plant making up the process a mathematical model was built. Experimental tests—consisting in measurements of oil solubility in supercritical CO₂—were carried out in a laboratory-scale apparatus to characterise the behaviour of sunflower oil in the separation from the supercritical fluid. The mathematical model of the whole process was coded in the commercial gPROMS process modelling environment where both its simulation and optimisation—this latter assuming the overall oil production cost as the objective function—were carried out. The process- and economics-related results are discussed and compared with those obtained with traditional and cold-pressing extraction.     

Drying of Probiotics: Optimization of Formulation and Process to Enhance Storage Survival

This work describes how probiotic bacteria can be dried at low temperature in two steps, combining spray drying and vacuum drying, in order to enhance their survival during storage. A sufficient number of dried probiotics survived storage for more than 3 months at 30°C, if an appropriate combination of protein and carbohydrate was selected as carrier and storage conditions were maintained optimal. The use of soy protein and maltodextrin or skim milk and arabic gum resulted in the best survival rates of probiotics during storage. No evident difference was found between different spray dryer configurations, although a cocurrent flow was preferred.     

Effect of precooking time and drying temperature on the physico-chemical characteristics and in-vitro carbohydrate digestibility of taro flour

Achu is a thick porridge obtained by cooking and pounding taro (Colocasia esculenta) corms and cormels in a mortar. This study was undertaken with the objective of producing precooked taro flour that can be used in the preparation of achu. Taro slices were precooked to times of 0, 20, 45 and 90 min and dried in an air convection oven at varying temperatures of 50, 60, 70 or 80 °C before milling into flour which was then analysed for its water absorption capacity (WAC), water solubility index, emulsion activity and stability, bulk density, foam capacity and least gelation concentration (LGC). Achu made from the flours were equally analysed for their relative penetrometric index, bulk density and colour. The results showed that precooking induced significant (P<0.05) decrease in foam capacity, penetrometric index, and increase in LGC, emulsion stability and WAC. The drying temperature also induces significant reduction in emulsion capacity and stability, penetrometric index, and increase in LGC, WAC. Long precooking time (>45 min) and drying temperature (>60 °C) induced significant reduction of the in-vitro carbohydrate digestibility of taro achu.     

Transparency in complex dynamic food supply chains

Food supply chains are increasingly complex and dynamic due to (i) increasing product proliferation to serve ever diversifying and globalising markets as a form of mass customisation with resulting global flows of raw materials, ingredients and products, and (ii) the need to satisfy changing and variable consumer and governmental demands with respect to food safety, animal welfare, and environmental impact. Transparency in the food supply chain is essential to guarantee food quality and provenance to all users of food and food products. Intensified information exchange and integrated information systems involving all chain actors are needed to achieve transparency with respect to a multitude of food properties.In this paper, specific challenges of food supply chains are highlighted. Major elements are addressed that support transparency to consumers, the government and food companies, which are considered the claimants of transparency. Elements considered to be enablers of transparency are governance mechanisms, quality and safety standards and information exchange. The paper specifies these transparency claimants and enablers for food supply chains and identifies major information system functions and information technology applications needed to comply with transparency demands. It thereby provides a framework for transparency analysis in food supply chains.     

Shear rates investigation in a scraped surface heat exchanger

The electrodiffusion technique was performed in order to investigate the shear rate on a scraped surface heat exchanger. Microelectrodes were placed inside: the walls of the outer cylinder; the inlet and outlet bowls; the rotor and the blades. Highly viscous Newtonian fluid (Emkarox HV45 solutions) and non-Newtonian model fluid (aqueous solutions of CMC) were used. The electrodiffusion method allowed us to measure wall shear rates. Maximum shear rate was observed at the scraping surface and caused by blades scraping, high shear rate was also measured on the leading edge of the blades. In the other parts of the exchanger, shear rate remained low but the development of Taylor vortices completely modified the scraped surface heat exchangers behaviour inside the surface of the bowls. A dimensionless representation of the friction factor was established for the inner and outer wall surface of the exchanger.