离子液体催化C_5馏分中二烯烃的聚合反应

合成了多种基于1-丁基-3-甲基咪唑阳离子的离子液体,并作为裂解C5馏分中混合二烯烃聚合反应的介质。考察了离子液体种类、反应温度、反应时间和添加Lew is酸对混合二烯烃聚合反应的影响。实验结果表明,以硝酸根为阴离子的离子液体对混合二烯烃的聚合反应具有一定的阻聚作用;以六氟磷酸根为阴离子的离子液体能明显促进混合二烯烃的聚合反应,提高二聚物的含量;添加Lew is酸(质量分数为1%的ZnCl2)的离子液体对混合二烯烃的聚合反应具有更明显的促进作用,其效果仅次于酸性氯铝酸类离子液体,反应温度以30℃以下为宜,温度过高将促使二聚物进一步聚合,形成三聚物乃至多聚物,降低二聚物的含量。     

中国第一口超千米深水钻井液技术

LW3-1-1探井位于中国南海珠江口盆地，作业水深1480m，完钻井深为3843m，地层以大套灰色泥岩和页岩为主，具有强水敏性．要求钻井液具有良好的流变性、润滑性、抑制性，良好的抗盐、抗钙、抗高温和抗低温能力，以及强的天然气水合物抑制能力。该井采用了PFMX钻井液体系，钻井周期为49d，介绍了钻井液工艺及现场应用情况。PFMX体系表现出很多油基钻井液的优点，如好的润滑性、高的钻进速率、膜效应、强的井眼稳定及页岩抑制性，解决了强水敏性地层的井壁稳定等问题，还解决了深水钻井中遇到的挑战，如低的破裂压力梯度、天然气永合物、浅层水流、深水低温等问题，满足了该区块作业需要。     

Low-cycle fatigue behavior of Sn-Ag, Sn-Ag-Cu, and Sn-Ag-Cu-Bi lead-free solders

Low-cycle fatigue (LCF) tests on as-cast Sn-3.5Ag, Sn-3Ag-0.5Cu, Sn-3Ag-0.5Cu-1Bi, and Sn-3Ag-0.5Cu-3Bi solders was carried out using a noncontact strain-controlled system at 20°C with a constant frequency of 0.1 Hz. The addition of Cu does not significantly affect the fatigue life of eutectic Sn-Ag solder. However, the fatigue life was significantly reduced with the addition of Bi. The LCF behavior of all solders followed the Coffin-Manson relationship. The fatigue life of the present solders is dominated by the fracture ductility and can be described by the ductility-modified Coffin-Manson’s relationship. Steps at the boundaries of dendrite phases were the initiation sites for microcracks for Sn-3.5Ag, Sn-3Ag-0.5Cu, and Sn-3Ag-0.5Cu-1Bi solders, while for Sn-3Ag-0.5Cu-3Bi solder, cracks initiated along both the dendrite boundaries and subgrain boundaries in the dendrite phases. The linking of these cracks and the propagation of cracks inside the specimen occurred both transgranularly through eutectic phases and intergranularly along dendrite boundaries or subgrain boundaries.     

5ZV25J-10160窄V胶带失效原因及改进措施

对川南矿区使用的5ZV25J－10160联组窄V胶带的损坏情况进行了观察分析，主要损坏原因有：胶带V形夹角与带轮轮槽夹角不一致，胶带顶部宽度与带轮轮槽开口宽度不符合要求，在传递动力中造成带轮顶部与胶带联结层接触而单根胶带悬空；胶带硫化质量差、配组不当；胶带及带轮安装、调校未达到要求。对此提出如下改进措施：规定胶带V形夹角和带轮轮槽夹角均为40°，单根胶带顶部宽25mm，带轮轮槽开口宽23．4mm；胶带必须严格按规定配组、安装、调校。实践证明，经改进后胶带传动平稳，无异常损坏。     

高能超声处理Al-1Si合金凝固组织分析

采用高能超声处理Al-1Si合金熔体,借助金相显微镜和电子探针进行组织分析,并测定合金的熔化潜热,分析了熔体中超声空化效应和声流效应影响凝固过程的机理。结果表明,试样晶粒平均尺寸由超声处理前的94μm减小到超声处理后的34μm;合金试样的熔化吸热量由263.90J/g降低为159.81J/g,在熔体中施加高能超声显著改善了合金成分的均匀性并细化了晶粒。     

Mobilfunkanlage; (Wartungs-)Container; Anwendungsbereich der BauO; anzeigepflichtige Baumaßnahmen; Bauanzeigeverfahren; subjektiv-öffentliche Nachbarrechte

Dem Nachbarn kommt im Bauanzeigeverfahren keine Parteistellung zu. Die Errichtung eines (hier: 18 m hohen) Stahlrohrgittermastes mit Paneel- und Richtfunkantennen ist bauanzeigepflichtig. Die Errichtung eines (hier: 4,5 m × 2,4 m × 2,9 m gro?en Wartungs-) Containers für eine Mobilfunkanlage unterliegt nicht dem Anwendungsbereich der tir BauO.     

Explosive Random‐Coefficient AR(1) Processes and Related Asymptotics for Least‐Squares Estimation

Abstract. Large sample properties of the least‐squares and weighted least‐squares estimates of the autoregressive parameter of the explosive random‐coefficient AR(1) process are discussed. It is shown that, contrary to the standard AR(1) case, the least‐squares estimator is inconsistent whereas the weighted least‐squares estimator is consistent and asymptotically normal even when the error process is not necessarily Gaussian. Conditional asymptotics on the event that a certain limiting random variable is non‐zero is also discussed.     

A polynomial factorization approach to the discrete time GI/G/1/(N) queue size distribution

The queue of a single server is considered with independent and identically distributed interarrivai and service times and an infinite (GI/G/1) or finite (GI/G/1/N) waiting room. The queue discipline is non-preemptive and independent of the service times.

A discrete time version of the system is analyzed, using a two-component state model at the arrival and departure instants of customers. The equilibrium equations are solved by a polynomial factorization method. The steady state distribution of the queue size is then represented as a linear combination of geometrical series, whose parameters are evaluated by closed formulae depending on the roots of a characteristic polynomial.

Considering modified boundary constraints, systems with finite waiting room or with an exceptional first service in each busy period are included.     

双噁唑啉化合物对PBT的增粘作用

以２．２＇－双（２－唑啉）和双（２－唑啉基）苯作扩链剂，用焙融挤出的方法，对聚对苯二甲酸丁二酯（ＰＢＴ）进行扩链，考察扩链剂的用量、反应时间和反应温度对ＰＢＴ的特性粘度及端羧基含量（ＣＶ）的影响。结果表明，当用２，２＇－双（２－唑啉）作扩链剂时，ＰＢＴ的特性粘度［η］从０．７９９提高到０．９２６ｄＬ／ｇ，ＣＶ降至５ｅｑ／１０￣６ｇ以下；当用双（２－　唑啉基）苯作扩链剂，［η］从０．７６３增至０．９２５ｄＬ／ｇ，ＣＶ降至１０ｅｑ／１０￣６ｇ以下，达到了较满意的扩链效果。     

Comparison among feature extraction methods for HIV-1 protease cleavage site prediction

Recently, several works have approached the HIV-1 protease specificity problem by applying a number of methods from the field of machine learning. However, it is still difficult for researchers to choose the best method due to the lack of an effective comparison. For the first time we have made an extensive study on methods for feature extraction for the problem of HIV-1 protease. We show that a fusion of classifiers trained in different feature spaces permits to obtain a drastically error reduction with respect to the performance of the state-of-the-art.