掺染料激光介质的研究

以PMMA为基质，在助溶剂的作用下掺杂激光染料Rh6G制备出了塑料激光介质样品，采用YAG激光器作为泵浦源测试了塑料激光介质的发射光谱，讨论了其激光发射机理。     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

纳米碳管阵列

在概括纳米碳管阵列特异的场发射效应及在场发射器方面应用前景的基础上，介绍了合成纳米碳管阵列的研究历程以及化学气相沉积法在纳米碳管阵列合成方面的重要意义，就当前纳米碳管阵列的快速合成与低温合成两个发展方向进行了概述，并指出等离子体化学气相沉积法能有效地用于纳米碳管阵列的低温合成。     

叶绿素衍生物─CPD_4在人血清中的激发和发射荧光谱

叶绿素衍生物４号（ＣＰＤ４）是一种新型中药光敏剂，本文研究了不同浓度的ＣＰＤ４分别在含１０％不同血型人血清的生理盐水中以及纯生理盐水中的激发和发射荧光光谱，并对结果进行了分析，结论对ＣＰＤ４在光动力诊断恶性肿瘤的临床应用具有一定的指导意义．     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

Advances in ALCHEMI analysis

The ALCHEMI method for locating the sites of foreign atoms within crystals is known to be sensitive to the delocalized emission of X-rays. This can result in large errors in some cases through differences in delocalization for different excitations or by error amplification in the ratio method of analysis. An alternative approach to the analysis of ALCHEMI data, using multivariate statistical analysis, is extended to the case of multiple impurities. Initial results from zone-axis channelling experiments for a Yb-doped zirconolite (CaZrTi₂O₇) are shown to confirm the improved accuracy of this method, especially for axial orientations. Data were collected using a 400-keV analytical electron microscope fitted with an intrinsic Ge X-ray detector. The potential advantages for ALCHEMI analysis of Ge detectors are considered.     

铁电材料用于阴极发射的研究

铁电材料作为一种新型的阴极材料，具有真空要求低、制作简单、功函数低、响应速度快等特点。本文讨论了铁电阴极发射的机理，回顾了主要铁电阴极材料的发射实验，包括低电压铁电发射实验，最后对铁电阴极材料的应用做了讨论和展望。     

汽车排放控制系统中的氧传感器现状及展望

介绍了浓差型(Nernst型)、极限电流型和半导体电阻型等汽车排放控制系统中的氧传感器原理及结构。在综合该领域国内外研究现状的基础上,对氧传感器的发展进行了展望。     

伴随内转换电子发射的俄歇电子能量及强度计算

简要介绍了伴随内转换电子发射产生的俄歇电子能量与强度的计算方法、计算程序及工作流程，并以^129Iβ^-衰变为例说明其具体应用。     

New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.