Thermo economic evaluation of oxy fuel combustion cycle in Kazeroon power plant considering enhanced oil recovery revenues简

Oxy fuel combustion and conventional cycle （currently working cycle） in Kazeroon plant are modeled using commercial thermodynamic modeling software. Economic evaluation of the two models regarding the resources of transport and injection of carbon dioxide into oil fields at Gachsaran for enhanced oil recovery in the various oil price indices is conducted and indices net present value （NPV） and internal rate of return on investment （IRR） are calculated. The results of the two models reveal that gross efficiency of the oxy fuel cycle is more than reference cycle （62% compared to 49.03%）, but the net efficiency is less （41.85% compared to 47.92%） because of the high-energy consumption of the components, particularly air separation unit （ASU） in the oxy fuel cycle. In this model, pure carbon dioxide with pressure of 20~ 105 Pa and purity of 96.84% was captured. NOx emissions also decrease by 4289.7 tons per year due to separation of nitrogen in ASU. In this model, none of the components of oxy fuel cycle is a major engineering challenge. With increasing oil price, economic justification of oxy fuel combustion model increases. With the price of oil at $ 80 per barrel in mind and $ 31 per ton fines for emissions of carbon dioxide in the atmosphere, IRR is the same for both models.     

Nutlins类似物诱导TCA-8113细胞凋亡的研究

目的:研究新型小分子化合物Nutlins类似物在体外对舌癌TCA-8113细胞的凋亡作用.方法:采用MTT法检测新型小分子化合物Nutlins类似物对TCA-8113细胞增殖的影响;用流式细胞仪(FCM)检测Nutlins类似物诱导TCA-8113细胞凋亡情况和周期阻滞情况;用DAPI染色法观察细胞核变化.结果:Nutlins类似物NL-11和NL19以浓度依赖的方式抑制TCA-8113细胞增殖并诱导其凋亡,而且能引起TCA-8113细胞发生G2期周期阻滞.结论:NL-11和NL-19化合物能够有效地在体外抑制TCA-8113细胞增殖,并诱导细胞凋亡.     

M701F燃气-蒸汽联合循环机组旁路系统的运行特性

针对三菱M701F单轴燃气-蒸汽联合循环机组的汽轮机旁路系统的运行方式,分析了影响旁路系统工作的因素,提出正确地干预旁路系统的措施,以提高运行的安全性。     

数控机床循环程序的应用

通过实例介绍循环程序在数控铣床和数控车床中的应用。     

Ni9钢焊接热影响区低温韧性的研究

采用焊接热模拟技术、-196℃示波冲击试验、金相显微分析、透射电镜分析技术考察了Ni9钢焊接热影响区粗晶区（CGHAZ）的低温韧性及其与焊接热循环的关系。结果表明，焊接热循环次数以及二次焊接热循环的峰值温度是影响其CGHAZ低温韧性的主要工艺因素；二次热循环在适当的峰值温度作用下促使钢原焊接粗晶区组织分解，并在晶界位置获得部分富Ni回转奥氏体，是原焊接粗晶区低温韧性得以改善和提高的组织成因。     

Life cycle analysis of sanitary landfill and incineration of municipal solid waste

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｒａｐｉｄｅｃｏｎｏｍｉｃｄｅｖｅｌｏｐｍｅｎｔａｎｄｕｒｂａｎｉｚａ ｔｉｏｎｉｎＣｈｉｎａｉｎｒｅｃｅｎｔｙｅａｒｓｈａｓｒｅｓｕｌｔｅｄｉｎｓｕｂｓｔａｎ ｔｉａｌｉｎｃｒｅａｓｅｏｆｓｏｌｉｄｗａｓｔｅ .Ｉｔｗａｓｅ     

薄板焊接型机车齿轮罩加工工艺的改进

通过实例分析，得出薄板焊接结构件自然时效周期远远小于实心件周期，并对其机理进行了分析。     

铸造铝合金在多轴非比例载荷下的低周疲劳行为研究

主要研究了356铸造铝合金在多轴非比例载荷下的低周疲劳性能。结果表明，合金在循环变形过程中表现为循环硬化特征，循环硬化的程度表现出对非比例加载路径的依赖性；在相同等效应变幅值下，合金的非比例加载低周疲劳寿命小于比例加载，且非比例加载低周疲劳寿命也表现出对非比例加载路径的依赖性；在多轴疲劳寿命预测模型中考虑非比例加载路径对疲劳寿命的影响可以大大提高寿命模型预测的精确度。     

LOW CYCLE FATIGUE OF Cr-Mn-N STAINLESS STEEL

An investigation was conducted to examine the low cycle symmetric push-pull fatiguebehaviour of the Cr-Mn-N dual-phase stainless steel.Two groups of specimens,A and B,were used,they were solution treated at 1050 and 1250℃,respectively.The.fatigue life ofgroup A is almost twice as long as that of group B under the same total strain amplitude.Theenergy loss during the fatigue tests and the mophology of the fracture surfaces have been stu-died and discussed.     

高温形变循环热处理对TiNi合金组织细化的影响

利用热机械模拟系统，对铸态Ti-50．3at％Ni合金进行高温形变循环热处理，研究不同热处理工艺对其组织细化的影响。结果表明：经过高温形变循环热处理，可以获得晶粒尺度在10μm以下的均匀单相显微组织。试样分别在55012和60012进行塑性变形，然后继续加热到80012短时保温进行不同的循环热处理，发现在55012变形后晶粒细化效果更加明显。还探讨了铸态Ti-50．3at％Ni合金高温形变循环热处理中组织的细化机理及其影响因素。