Experimental investigation on large deflection response of a frame impacted by a moving body

This paper reports on the experimental investigation of the dynamic large deflection response of a portal frame impacted at its midspan by a body moving at a certain speed. Both the deflection and velocity vs. time curves of the midspan and the dynamic history of a number of desired locations were recorded during the process of response. On the basis of the test data, the momentum and kinetic energy conversion between the frame and the moving body in the impact process are realized, and the occurrence and expansion of plastic regions are described. Investigation results show that the initial collision is approximately ideally inelastic, and that the elastic deformation plays a considerable role in the response though the input energy is much larger than the maximum elastic energy capacity of the beam member; therefore, in a general impact, the energy ratio should not be regarded as a sufficient criterion for a rigid—plastic solution. The ratios of the impulse transferred to and the energy absorbed by the frame in the initial collision to that carried by the moving body before impact is only related to the ratiobetween the equivalent mass of the frame paticipating in the initial collision and the mass of the impacting body, having nothing to do with the impacting velocity to a certain extent.     

Study of the electronic and atomic structure of thermally treated SrTiO3(110) surfaces

The electronic structure of heated SrTiO₃(110) surfaces was investigated with metastable impact electron spectroscopy and ultraviolet photoelectron spectroscopy (He(I)). Scanning tunnelling microscopy and atomic force microscopy (AFM) were used to study the topology of the surface. The crystals were heated up to 1000°C under reducing conditions in ultrahigh vacuum or under oxidizing conditions in synthetic air for 1 h, respectively. Under both conditions microfacetting of the surface is observed. The experimental results are compared with ab initio Hartree–Fock calculations, also presented here, carried out for both ideal and reconstructed SrTiO₃(110) surfaces. The results give direct evidence for Ti termination of the faceted TiO₂ rows. Copyright © 2003 John Wiley & Sons, Ltd.     

4-氯-4''''-取代-苯丁酮的低能电子轰击质谱和取代基效应的研究

用离子动能谱探讨了9个苯环上不同取代基的4-氯-4′-取代-苯丁酮EI断裂的主要途径是:分子离子先进行Mclafferty重排,而后α-断裂。将电子能量降低至20e v,对Mclafferty重排的产物离子的α-断裂反应用Hammett方程处理,得回归线性方程lgZ/Z_0=-0.37σp-0.008,线性相关系数为0.9949。由此可明显地看出质谱中单分子断裂反应的取代基效应。     

Analysis of dinitrofluoranthenes by high resolution capillary gas chromatography/mass spectrometry

This paper reports the retention indices of eighteen of the possible twenty-five dinitrofluoranthene isomers.     

2-乙酰氨基-3-苯基-N-苯基-丙烯酰胺衍生物的电子轰击质谱研究

本文报道了6种新的丙烯酰胺衍生物的EI谱。在精确质量测量和B/E,B~2/E联动扫描亚稳离子测定的基础上,着重讨论了该类化合物的共同质谱特征:如分子离子失去H_2O的成环反应;产物离子的开环反应;分子内的氢重排反应等。同时,利用Hammett方程讨论了化合物中N-苯基端苯环上不同取代基对特定碎片离子强度的影响     

核／壳结构增韧剂对环氧树脂的抗冲改性

核／壳结构增韧剂对环氧树脂的抗冲改性张明耀，张会轩，杨海东，冯之榴（吉林工学院化学工程系长春１３００１２）（中国科学院长春应用化学研究所长春）关键词核／壳结构，增韧剂，环氧树脂，共混核／壳结构增韧剂是用分步乳液聚合技术制造的一种复合乳胶粒子，其核为橡...     

Effects of polystyrene-encapsulated magnesium hydroxide on rheological and flame-retarding properties of HIPS composites

In this study, polystyrene (PS)-encapsulated magnesium hydroxide (Mg(OH)₂) was successfully prepared by in situ polymerization of styrene on the surface of Mg(OH)₂ in a high-speed mixer. A large amount of PS chemically bonded on Mg(OH)₂ surface was confirmed by means of FT-IR, TGA and SEM. A series of composites of high impact polystyrene (HIPS) were prepared by melt blending in a co-rotating twin-screw extruder. The effects of PS-encapsulated filler on the properties of HIPS composites were studied by SEM, rheology and combustion tests (horizontal burning tests and cone calorimetry). The dispersion and adhesion patterns of PS-encapsulated Mg(OH)₂ in HIPS matrix were investigated through FT-IR and SEM. The experimental results demonstrated that comparing to the composites containing untreated filler, the rheological and flame retardant properties of those containing PS-encapsulated filler were found to be significantly improved. This improvement is mostly attributed to a better dispersion of the encapsulated filler and a strong adhesion between the filler and matrix.     

一类2(1H)-喹喔啉衍生物的电子轰击质谱分析

以邻苯二胺为原料合成表征了一类喹喔啉衍生物；1-烷基-3-甲基-2（1H）-喹喔啉-2-酮（1-alkyl-3-methly-2(1H)-quinoxalin-2-one，简称AMQ，其中alky=H、CH3、Et、n-C3H5、n-C5H11、n-C16H33)。用电子轰击电离质谱（EI-MS）和核磁共振谱图（^1H-NMR)鉴定了AMQ，研究了不同取代基对这类化合物EI-MS谱图的影响，分析得到一些裂解规律。结果表明：所有样品谱图中均有芳香化合物的特征CnHn^ 系列峰m/z78，65，52，39和（或）m/z77、76、64、63、51、50、38、37。对于末取代的样品及低级烷烃取代的样品，谱图中的基峰为分子离子峰，对于取代基中碳数大于等于3的样品。谱图中的基峰不是分子离子峰，分子离子峰强度随着碳数的增加而降低。这些样品一般容易发生骨架重排，丢失一分子CO，生成1-烷基-2-甲基苯并哒唑正离子。此外，还讨论了谱图中其它的一些碎片离子峰。这对于研究和指导喹喔啉衍生物 的合成，探讨它们在药效及结构特征与生理活性的关系等方面具有重要的应用价值和理论意义。     

HIPS／PP熔融反应共混及其动态力学性质

研究了高抗冲聚苯乙烯（HIPS）／聚丙烯（PP）共混物在过氧化二异丙苯（DCP）存在下的熔融反应过程及其动态力学性质．HIPS在DCP存在下以聚苯乙烯（PS）的降解为主，伴随着聚丁二烯（PB）的交联和接枝，PP在DCP存在下以降解为主，HIPS／PP在DCP存在下以PP同HIPS的反应接枝为主，这种原位生成的增容剂显著地改善了HIPS／PP两组份间的相容性，其分子运动特征较前两者发生明显变化，PS的Tg下降，PB和PP的Tg升高．     

Electron impact induced fragmentation of aromatic N-alkoxy-imines I. Ring closure in (M-CH2O)+• ions by intramolecular aromatic substitution

Summary N-Butoxy- and N-propoxy-imines derived fromo-,m-, andp-substituted benzaldehydes (X = F, Cl, Br, I) decompose upon electron impact to the respective aldoximes by loss of C _n H_2n and competitivelyvia 1,5-distonic radical cations by loss of CH₂O to 1,3-distonic ions which eliminate H and/or a halogen atom in the course of homolytic aromatic substitution, giving rise to cyclic (M-CH₂O-H)⁺ or (M-CH₂O-X )⁺ ions.Dedicated with warm regards to Prof. Dr.D. Seebach, Zürich, on the occasion of his 60^th birthday