密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

An optical surface plasmon resonance biosensor for determination of tetanus toxin

Surface plasmon resonance (SPR) has been successfully applied for the simple, rapid, and label-free assay of various biomolecules. This assay evaluates a novel wavelength modulation SPR biosensor for the detection of tetanus toxin. The wavelength modulation SPR biosensor is designed based on fixing the incident angle of light and measuring the reflected intensities in the resonance wavelength range spanning 400-800 nm simultaneously. Tetanus toxin (TeNT), one of the most potent toxins known, is synthesized as a 150 kDa single polypeptide chain. The SPR biosensor has been shown to be capable of directly detecting concentration of tetanus toxin as low as 0.028 Lf ml⁻¹. Under selected experimental conditions, the SPR biosensor has a good reproducibility, sensitivity and reversibility. The results illustrate how wavelength modulation SPR biosensor can be used to detect biomolecular interactions.     

超临界流体萃取仪器的研制

本文报道了以国产原配件为基础，成功地研制了分析规模的超临界流体萃取仪器、并对仪器性能进行了全面考察，仪器性能稳定，重现性良好（ＲＳＤ＜３．１％），定量线性关系可靠，可满足定量萃取的要求。     

Simultaneous determination of traces of heavy metals by solid-phase spectrophotometry

A coupling sensitive solid phase spectrophotometric (SPS) procedure for determination of traces of heavy metals (Me-SPS) and multicomponent analysis by multiple linear regressions (MA), a simple methodology for simultaneous determination of metals in mixtures was inaugurated. The Me-SPS procedure is based on sorption of heavy metals on PAN-resin and direct absorbance measurements of colour product Me-PAN sorbed on a solid carrier in a 1-mm cell. This methodology (Me-SPS-MA) was checked by simultaneous determination of metals in synthetic mixtures with different compositions and contents of metals important in pharmaceutical practice: Zn, Pb, Cd, Cu, Co, and Ni. Good agreement between experimental and theoretical amounts of heavy metals is obtained from the recovery test (78.3–110.0%). The proposed method enables determination of particular metal ion at the ng mL⁻¹ level and it was successfully applied to the determination impurities from heavy metal traces in pharmaceutical substances (Cu in ascorbic acid, Pb in glucose, and Zn in insulin). The proposed procedure could be possible contribution to the development of pharmacopoeial methodology for a heavy metals test.     

微量元素锌在治疗Bell麻痹中的作用

为探讨急性早期应用补锌和综合疗法治疗Bell麻痹 ,将 1 5 8例Bell麻痹患者 ,随机分成两组 :(1 )补锌组 (补锌 +综合疗法 ) ;(2 )对照组 (单纯综合疗法 )。对其进行了观察对比治疗 ,同时检测了所有患者治疗前后自身对照发锌值 ,还对所有患者进行了定位诊断、面神经电反应测试、并对面肌功能进行评分。结果表明 ,对定位诊断其病变在D段、面肌功能评分在 1 1分以下、面神经无电反应患者 ,即使给予早期综合治疗 ,效果仍较差 ,而早期给予补锌加综合治疗效果优于对照组 ,其它段内患者治疗次数和治愈天数也均优于对照组。可见微量元素锌在发挥免疫应答、免疫调控中的重要作用     

Bayesian sequential reliability for Weibull and related distributions

Assume that the probability density function for the lifetime of a newly designed product has the form: [H(t)/Q()] exp{–H(t)/Q()}. The Exponential(), Rayleigh, WeibullW(, ) and Pareto pdf's are special cases.Q() will be assumed to have an inverse Gamma prior. Assume thatm independent products are to be tested with replacement. A Bayesian Sequential Reliability Demonstration Testing plan is used to eigher accept the product and start formal production, or reject the product for reengineering. The test criterion is the intersection of two goals, a minimal goal to begin production and a mature product goal. The exact values of various risks and the distribution of total number of failures are evaluated. Based on a result about a Poisson process, the expected stopping time for the exponential failure time is also found. Included in these risks and expected stopping times are frequentist versions, thereof, so that the results also provide frequentist answers for a class of interesting stopping rules.This research was supported by NSF grants DMS-8703620 and DMS-8923071, and forms part of the Ph.D. Thesis of the first author, the development of which was supported in part by a David Ross grant at Purdue University. The authors thank the editors and a referee for insightful comments and suggestions.     

Bahadur efficiency and robustness of studentized score tests

We derive the exact Bahadur slopes of studentized score tests for a simple null hypothesis in a one-parameter family of distributions. The Student's t-test is included as a special case for which a recent result of Rukhin (1993, Sankhy Ser. A, 55, 159–163) was improved upon. It is shown that locally optimal Bahadur efficiency for one-sample location models with a known or estimated scale parameter is attained within the class of studentized score tests. The studentized test has an asymptotic null distribution free of the scale parameter, and the optimality of likelihood scores does not depend on the existence of a moment generating function. We also consider the influence function and breakdown point of such tests as part of our robustness investigation. The influence of any studentized score test is bounded from above, indicating certain degree of robustness of validity, but a bounded score function is needed to cap the influence from below and to ensure a high power breakdown point. We find that the standard Huber-type score tests are not only locally minimax in Bahadur efficiency, but also very competitive in global efficiency at a variety of location models.     

Whitehead test modules

A (right -) module is said to be a Whitehead test module for projectivity (shortly: a p-test module) provided for each module , implies is projective. Dually, i-test modules are defined. For example, is a p-test abelian group iff each Whitehead group is free. Our first main result says that if is a right hereditary non-right perfect ring, then the existence of p-test modules is independent of ZFC + GCH. On the other hand, for any ring , there is a proper class of i-test modules. Dually, there is a proper class of p-test modules over any right perfect ring.

A non-semisimple ring is said to be fully saturated (-saturated) provided that all non-projective (-generated non-projective) modules are i-test. We show that classification of saturated rings can be reduced to the indecomposable ones. Indecomposable 1-saturated rings fall into two classes: type I, where all simple modules are isomorphic, and type II, the others. Our second main result gives a complete characterization of rings of type II as certain generalized upper triangular matrix rings, . The four parameters involved here are skew-fields and , and natural numbers . For rings of type I, we have several partial results: e.g. using a generalization of Bongartz Lemma, we show that it is consistent that each fully saturated ring of type I is a full matrix ring over a local quasi-Frobenius ring. In several recent papers, our results have been applied to Tilting Theory and to the Theory of -modules.

     

Wiener's test for space-time random walks and its applications

This paper establishes a criterion for whether a -dimensional random walk on the integer lattice visits a space-time subset infinitely often or not. It is a precise analogue of Wiener's test for regularity of a boundary point with respect to the classical Dirichlet problem. The test obtained is applied to strengthen the harder half of Kolmogorov's test for the random walk.

     

A predictive model for impact response of viscoelastic polymers in drop tests

We show for the first time that a classical Hookean viscoelastic constitutive law for rubbery materials can predict the impact forces and deflections measured with a commercial drop tester when a mass, or tup with a flat impacting surface is dropped onto a flat pad of commercial impact-absorbing rubber. The viscoelastic properties of the rubber, namely the relaxation times and strengths, are obtained by a standard rheological linear-oscillatory test, and the equation of momentum transfer is then solved, using these measured parameters, assuming a uniaxial deflection of the pad during the impact. Good agreement between measured and predicted forces and deflections is obtained for a series of various drop heights, tup masses, impact areas, and pad thicknesses, as long as the deflection of the pad relative to its thickness is small or modest (<50% or so), and as long as the area of the pad is less than or equal to that of the tup. When the pad area is greater than the tup, forces are higher than predicted, unless an empirical factor is introduced to account for the nonuniaxial stretching of the ring of material that extends outside of the impact area. These results imply that the impact-absorbing properties of a rubbery polymeric material can be assessed by simply examining the material's linear viscoelastic spectrum.