高性能纳米碳材料改性Cu/ZnO/Al2O3甲醇水蒸汽重整制氢催化剂

由铜基催化剂催化甲醇水蒸汽重整制氢是有效解决车载燃料电池等制氢需求的潜在途径．但传统铜基催化剂对该反应的低温催化活性及制氢选择性均不理想．近年来碳纳米管及活性碳纤维等因具有独特的纳米孔结构、高比表面积和优异的吸附性能作为潜在的新型催化材料而备受关注．     

Tb3+离子发光探针研究Ca2+,La3+和Al3+与拟南芥钙调素的竞争结合

利用Tb3 离子的发光, 研究了Tb3 与拟南芥钙调素 (CaM)结合的荧光光谱及荧光滴定曲线特点, 然后利用Tb3 4*CaM系统在221 nm直接激发和280 nm敏化激发的光谱变化研究了Ca2 , La3 和Al3 与拟南芥钙调素 (CaM) 的竞争结合作用. 结果表明: Tb3 , La3 与钙调素的竞争结合能力强于Ca2 , 而Tb3 的竞争结合力又大于La3 , Ca2 与钙调素的结合力远大于Al3 . 竞争实验的结果从分子水平上揭示了Tb3 , La3 和Al3 等金属离子生物效应可能的分子机制.     

Investigation of eutectic transformation of Zn−Al alloy by DTA

The paper discusses the investigation of crystallization of metals and alloys by differential thermal analysis (DTA). It was assumed that this method allows determination of the mechanism and kinetics of volumetric crystallization underiso conditions (e.g. anisothermal) on the basis of the parameters of the equation expressing an integral form of the DTA curve. From DTA, a course of eutectic transformation was determined for a technical Zn?Al alloy containing 4wt% Al. Investigations were carried out under continuous cooling at various rates and the kinetics parameters were determined with the KEKAM equation:-ln(1-x)=kl _n     

Multicomponent analysis with a computerized flow injection system using LED photometric detection

An original computer-controlled solid-state photometer has been developed and its potential for simultaneous multicomponent flow-injection analysis of binary and ternary mixtures is demonstrated. The device is simple in construction. Its principle of operation is based on rapid sequential measurements of the absorbance of the complexes formed by the analytes with chromogenic reagents at the wavelengths corresponding to the emission maxima of three light emitting diodes (563, 580 and 638 nm).     

27Al和29Si MAS-NMR对Mo/HZSM-5催化剂的研究

使用＾２９Ａｌ固体离分辨核磁技术对甲烷无氧芳构化催化剂Ｍｏ／ＨＺＳＭ－５分子筛进行了研究，发现ＨＺＳＭ－５分子筛本体中仅含有少量非骨架Ａｌ，Ｍｏ物种与分子筛骨架Ａｌ的相互作用随Ｍｏ担载量以及焙烧的温度的升高而增加，在高温焙烧下，Ｍｏ物种会使分子筛骨架严重脱铝，并且生成Ａｌ２（ＭｏＯ４）３新相，最终导致分子筛骨架塌陷，催化性能下降。     

Preparation and dehydration behaviour of thomsonite with ideal chemical composition

Thomsonite with ideal chemical composition and with an ordered framework structure was synthesised hydrothermally from zeolite Na?A, which was ground to X-ray amorphous, with 0.05 mol dm^?3 CaCl₂ solution at 200°C. The dehydration behaviour of the prepared thomsonite was examined by TG-DTA. It was revealed that thomsonite lost most of zeolitic water below 450°C in three steps at about 180°, 340° and 390°C. The peak profiles of, the two higher-temperature endotherms were sharp and similar, and the weight loss at each step was approximately equal.     

Molecular orbital study for Na, Mg, and Al adsorption on the Si (111) surface

We investigated the interactions between the Si(111) surface and the Na, Mg, and Al atoms using cluster model calculations. Calculations were performed at levels of complete-active-space self-consistent-field (CASSCF) and multi-reference singly and doubly excited configuration interaction (MRSDCI) calculations using the model core potential method. Our calculations revealed that the most favorable sites of Na, Mg, and Al adsorption on Si(111) are on top (T₁), bridge (B₂), and 3-fold filled (T₄) sites, respectively. The nature of chemical bonds between these metal atoms and the dangling bonds of the surface Si atoms are found to be essentially covalent.     

VOCl_3/Et_3Al_2Cl_3/CCl_4溶剂体系催化乙烯丙烯共聚

本文以VOCl_3/Et_3Al_2Cl_3为催化剂,在CCl_4溶剂中进行乙烯共聚反应。在聚合过程中,发生一异常的颜色突变现象。颜色突变后,体系催化聚合生成分子量很低的产物。从聚合物的结构表征及机理探讨表明:颜色突变后,体系产生了新的活性中心,催化机理发生了转变——由配位机理转变为阳离子机理。     

Scanning force microscopy and amplitude versus distance measurements on single‐crystal oxide surfaces

Dynamic mode imaging and investigations on amplitude versus distance measurements were carried out on surfaces of single‐crystal; SrTiO₃, Al₂O₃ and LaAlO₃. Experiments were performed to optimize the imaging parameters for surfaces having varying elastic properties. The dependence of the amplitude–distance curve on different materials and the amplitude of oscillation was investigated. For SrTiO₃, a low‐drive amplitude provided the linear region necessary for imaging. A large amplitude of oscillation, however, created dips in the amplitude–distance curves, presumably due to complications in the tip dynamics such as bifurcation, period doubling, etc. In the case of Al₂O₃ and LaAlO₃, amplitude–distance curves were characterized by oscillations for lower tip sample separations and step‐like discontinuities in the stiff region. The magnitude of the oscillations and discontinuities was found to decrease with amplitude and eventually could be eliminated. Thus, for these samples a large amplitude of the cantilever provided the linear region required for imaging. It was observed also that two different surfaces of Al₂O₃ (c‐cut and r‐cut) yield totally different amplitude–distance curves consistent with their standard differences. The results indicate the complex behaviour of amplitude–distance curves, which not only vary from one sample to another but from one surface to another for a given sample. Copyright © 2004 John Wiley & Sons, Ltd.