Effect of MoS2 morphology on the HDS activity of hydrotreating catalysts

We have applied near-edge X-ray absorption fine structure (NEXAFS) to characterize the surface and bulk properties of Li_xNi_1–xO catalysts. In our experimental set-up, NEXAFS spectra of powder materials could be obtained by measuring the intensity of either electron-yield or fluorescence-yield. While the electron-yield method is sensitive only to the top few atomic layers, the fluorescence-yield method can detect species up to a few thousands angstroms deep into the bulk structure. The ability to distinguish surface and bulk compositions is demonstrated in studies of a number of Li_0.5Ni_0.5O samples, of which the surface compositions vary as a function of preparation procedures. In addition, NEXAFS investigations following the reaction of Li_xNi_1–xO with CH₄ have also been carried out and the results indicate that the initial surface reaction intermediates are Li₂CO₃.     

四异丁氧基镍酞菁的合成及其溶剂效应

4 异丁氧基邻苯二腈与氯化镍在强有机碱 1 ,8 二氮杂双环 (5 ,4,0 )十一碳烯 7催化下反应 ,合成了四异丁氧基镍酞菁 ,产物经FT -IR、元素分析、UV -Vis吸收光谱和1 H NMR表征了结构 ;并研究了其溶剂效应 ,结果表明 :最大吸收峰波数ν与函数 f(n ,ε)存在一定的线性关系 ,线性相关系数为 0 940 2 ,而Bayliss函数项 (n2 - 1 ) /(2n2 +1 )决定了最大吸收波长 (λmax)的位移变化 ;化合物的λmax在不同溶剂中随聚集程度增加 ,发生一定程度的蓝移     

Magneto-sensitive nickel nanowires fabricated by electrodeposition into multi- and single-ion track templates

Polycarbonate templates of (30±1) μm thickness containing cylindrical etched-track nanochannels of (500±50) nm diameter were used for electrodeposition of Ni nanowires. Using 10⁴ channels per cm², the most favourable deposition potential of  − 1.0 V was determined in a potentiostatic mode by varying the deposition potential with respect to an Ag/AgCl reference electrode over a range between  − 0.1 V and  − 1.5 V. The deposition efficiency at  − 1.0 V was estimated around 10%. The resulting single wires had a resistance around 200 Ω and showed an anisotropic magnetoresistance (AMR) effect of 1%, applicable to directionally sensitive magnetic field sensors.     

Al2O3／TiB2／SiCW陶瓷刀具加工镍基合金时的磨损机理研究

研究了Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ陶瓷刀具加工Ｉｎｃｏｎｅｌ７１８镍基合金时的切削性能和磨损机理。结果表明；在低速切削条件下，Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ和硬质合金刀具的抗后刀面磨损的能力相差不大；而在高速切削条件下，前者的抗后刀面磨能力远高于后者。     

An evaluation of commercial nickel catalysts during hydrogenation of soybean oil

The activities of several commercial nickel catalysts were determined by measuring their activation energies. Among these catalysts, G95E, Resan 22, Nysosel 222 and 325, all with low activation energy, were more active than DM3 and G95H, which had higher activation energy. However, the less active catalysts increased the linoleate selectivity of soybean oil during hydrogenation. The yields of bothtrans isomers and winterized oil were higher for the more selectively hydrogenated oil catalyzed by the less active catalysts. In the sensory evaluation, the fractionated solid fat that contained moretrans isomers was lower in flavor scores than the fractionated liquid oil after hydrogenation and winterization of soybean oil.     

Electrodeposition of catalytically active nickel for the oxygen evolution reaction — effects of anionic composition

Nickel electrodes were prepared by electrodeposition in electrolytes of various anionic compositions. The deposition conditions and bath types were evaluated with special emphasis on the electrocatalytic properties for the oxygen evolution reaction (OER). Electrochemical characterizations in a 5 mol/L KOH solution at 25°C showed that the electrode deposited from the chloride bath, having a low Tafel slope of 50 mV/dec and an overpotential of 396 mV at 100 mA/cm², is the most catalytically active among electrodes prepared in electrolytes of various anionic compositions. The electrode activity for the OER is related to the real surface areas, which depend on the anion compositions in the deposition bath and the deposition conditions.     

光亮镀镍液pH值计算机控制系统

光亮镀镍液的ｐＨ值控制得稳定否，对于镀层质量有重要的影响，本文介绍了在电镀生产过程中，对镀镍液的ｐＨ值进行自动控制的一个计算机系统，该系统在广州五羊自行车厂电镀车间投入使用后，镀件质量有了明显的提高。     

适用于摩托车零件的多层镍电镀工艺

概括目前我国摩托车零件电镀所用镀层组合，对照有关金属覆盖层的国家标准，认为摩托车零件应用多层镍组合，并提供了工艺配方。     

纳米尺寸硫化镍化学增感剂

本文发现了硫化镍纳米粒子对卤化银乳剂的化学增感作用，采用水不溶性的硫化镍纳米粒子作为化学增感剂，与水溶性的硫代硫酸钠增感剂相比，可以在乳剂灰雾增加不大的条件下明显提高乳剂的感光度和反差。     

水扬酸镍的合成表征及结构分析

用流变相反应法合成了Ni(OH)Sal·H2 O和Ni2 (OH) 2 Sal2 ·H2 O。通过元素分析、TG、IR、XRD和磁矩对其结构进行了分析。结果表明两个配合物都属于单斜晶系 ,其晶胞参数为 ,Ni(OH)Sal·H2 O∶a =13.1179,b =11.36 41,c =9.5 6 0 5 ,β =92 .96 2 ,V =14 2 3.31(97) 3,Z =7,Dcalcd .=1.885 g/cm3,Dexpt=1.85 8g/cm3;Ni2 (OH) 2 Sal2 ·H2 O :a =13.12 17,b =11.35 80 ,c =9.5 5 2 2 ,β =92 .978 ,V =14 2 1.72 (95 ) 3,Z =4 ,Dcalc=2 .0 73g/cm3,Dexp=2 .0 0 0 g/cm3。