一种抗振的小型化中子探测器研究

主要介绍了一种可靠性高、小型化的抗振型的中子探测器．它由双套独立探测系统组成,内部采用非刚性连接结构,体积小,能够在一定振级的环境中正常工作,并且能满足其他的一些较恶劣的环境条件要求。     

超高频天线宽带小型化技术的新进展

阐述当前超高频天线宽带小型化的几种主要技术,具体介绍了三种新型机栽超高频合成孔径雷达天线的结构和电参数,指出了超高频天线宽带小型化的发展方向。     

小型化水质改善技术在海上油田的应用

针对海上某油田注入水长期不达标的问题,在生产水水质分析与认识的基础上,结合平台具体条件,制定了紧凑型旋流溶气气浮(CDFU)+两级精细过滤,并辅以水处理药剂的小型化水质改善工艺。CDFU具有结构简单、占地面积小、摆放灵活、抗波动性强等特点,可有效克服平台空间限制、来水波动大的难题;高效水处理药剂能够解决生产水中高含量H_2S导致的水质发黑问题。该工艺在现场应用中取得良好效果,出水水质平均ρ(油)4.25mg/L,平均ρ(悬浮物)0.45mg/L,平均粒径中值1.35μm,满足A2回注水指标要求,工艺可行性得到验证。该小型化水质改善技术的试验成功对于海上油田含硫生产水处理具有重要的借鉴意义。     

一种h形缝隙多频微带天线设计

通过对传统缝隙微带天线的分析,提出了一种h形缝隙微带天线.该天线具有多频带、小型化等特点,通过加载短路探针和在接地板挖槽的方法降低了天线的谐振频率,提高了带宽.利用基于有限元法的电磁仿真软件HFSS11.0对天线的特性进行了仿真,仿真结果表明,该天线在回波损耗S11＜-10 dB时,其工作频段为2.38～2.79 GHz,4.59～4.75 GHz和5.12～5.90 GHz,尺寸比普通微带天线降低了62.43％,从而验证了这种设计方案的有效性.该天线结构简单易于实现,能够满足无线局域网802.11a/b/g/n移动终端内置天线的多频带和小型化的要求.     

LED路灯照度测试系统设计与研究

着重介绍了一套低功耗、高性价比的小型化LED路灯照度测试系统的设计思路,该系统由基于LabVIEW的主控平台、SQL后台数据库、智能测试小车,以及小车上的各种传感系统和照度采集系统组成,可自动对LED路灯照度进行较精准的采集、精细化计算分析,并依照相关国家标准自动对测试结果进行量化评估.系统的设计形成了有效便捷的测试理论和方法,并可将测试和评估结果以数据分析报表形式直观易识地呈现,数据分析报表支持实时网络查询与共享功能.该系统产生的评估结果将为城市LED路灯改造工程提供全面的、客观科学的依据.     

多层小型化抗EMI滤波器的仿真与设计

采用低温共烧陶瓷(low temperature co-fired ceramics,LTCC)先进集成技术及异质材料的共烧匹配技术,并借助于三维电磁场仿真软件对滤波器进行建模和仿真,实现低截止频率多层抗EMI滤波器的小型化设计,得到截止频率为12MHz(3dB),带外抑制≥30dB(200～2500MHz),尺寸为2.00mm×1.25mm×0.85mm的抗EMI滤波器样品。     

提高小型化交流接触器分断能力的探讨

本文在分析了交流接触器的分断和灭弧过程的基础上，结合我们开发的具体产品，提出了提高小型化小容量交换接触器能力的具体措施，通过对触头回路，灭弧室和触头材料的改进，将接触器的约定操作性能接通分断能力从Ic=72A提高到Ic=108A。     

微通道内乙醇胺吸收CO2的过程特征（英文）

Process characteristics of CO2 absorption using aqueous monoethanolamine(MEA) in a microchannel reactor were investigated experimentally in this work.A T-type rectangular microchannel with a hydraulic diameter of 408 μm was used.Operating parameters,i.e.temperature,pressure and molar ratio of MEA to CO2 were studied.Under 3 MPa pressure,the mole fraction of CO2 in gas phase could decrease from 32.3% to 300×10?6 at least when gas hourly space velocity ranged from 14400 to 68600 h?1 and molar ratio of MEA to CO2 was kept at 2.2.In particular,the effects of temperature on CO2 absorption flux,mass transfer driving force,gas-liquid contact time and en-hancement factor were analyzed in detail and found that mass transfer enhancement by chemical reaction was a crucial factor for the process of CO2 absorption.     

Development of enhanced three-dimensional printed packings for scale-up of distillation columns: A successful case study

This publication presents a general approach for the enhancement of packings regarding scalability, separation efficiency, and fluid dynamic properties using three-dimensional (3D) printing. The methodology is used to develop miniaturized, scalable packings for process development, and scale-up applications. For this purpose, a 3D printable computer-aided design version of the Rombopak 9M industrial packing (RP9M-3D), which is known for its positive scalability properties, was created. An initial characterization by means of computational fluid dynamics simulations and mass transfer measurements reveals positive but also negative design properties. These findings are used to create a more advanced, miniaturized packing structure, the XW-Pak. The evolved structure is compared to the RP9M-3D. The simulation and experimental results show that the enhanced packing, which is still in the early stages of development, exhibits higher separation efficiencies with improved scalability properties at the same void fraction and surface area than the RP9M-3D.     

面向气象探空的微型热敏电阻设计及性能研究

针对高空气象探测用温度传感器存在响应时间长、测温精度差以及辐射误差大等现状,研制了一种封装体积小、响应速度快、抗辐照能力强的温度传感器。采用固相法制备了Mn-Ni-Cu-Fe-O基片状热敏电阻,尺寸分别为0.4 mm×0.4 mm×0.25 mm与0.6 mm×0.6 mm×0.25 mm。在片状热敏电阻敏感元表面依次沉积绝缘膜和铝金属反射薄膜。结果表明,研制的热敏电阻在-80℃～60℃范围内,其阻值范围分别为1 000 kΩ～4.2 kΩ与375 kΩ～1.6 kΩ;热耗散系数为1.034 mW/℃,响应时间为0.63 s。利用太阳光模拟器对热敏电阻进行太阳辐射测温误差研究,在100 W/m²的辐照强度下测温误差最小为0.22℃。该热敏电阻有望应用在高空气象探测的探空仪中。