Methods of Modifying the Brittle Behavior of Cementitious Composites

We put forward effective methods of increasing the tensile strain of cementitious composites with 2% PVA fiber and high fly ash content. The test results show that curing condition has a significantly effect on the tensile performance. It is approved that the specimens incorporated appropriate volume fraction rubber powder and lightweight aggregate greatly increase the tensile strain of composites at medium-term age, but indefinitely at long-term age. To a certain extent, EVA can limitedly enhance the tensi...     

Effect of silica fume and fly ash on heat of hydration of Portland cement

Results of calorimeter tests on Portland cement-silica fume-fly ash mixtures are presented. Data indicate that silica fume accelerates cement hydration at high water/cementitious ratios and retards hydration at low water/cementitious ratios. On the other hand, fly ash retards cement hydration more significantly at high water/cementitious ratios. When silica fume and fly ash are added together with cement, the reactivity of the silica fume is hampered and the hydration of the cementitious system is significantly retarded.     

Efficiency of mineral admixtures in mortars: Quantification of the physical and chemical effects of fine admixtures in relation with compressive strength

This work is the fourth part of an overall project the aim of which was the development of general mix design rules for concrete containing different kinds of mineral admixtures. The two first parts presented the separation and quantification, by means of an empirical model based on semi-adiabatic calorimetry measurements, of the different physical effects responsible for changes in cement hydration (short terms) when chemically inert quartz powders were used in mortars. Part three dealt with an intensive experimental program, presenting and commenting more than 2000 compressive strength measurements. This program concerned 1 day to 6 months old mortars containing up to 75% of inert and pozzolanic admixtures. All these compressive strength results are analyzed in this fourth part and the influence of three effects, namely dilution, heterogeneous nucleation and the pozzolanic effect, are discriminated and quantitatively evaluated. An efficiency concept is proposed in order to take into account the effect of mineral admixture in mortars from both the physical and chemical points of view. It uses an efficiency function ξ(p) that has notable properties: it is independent of time, independent of fineness and independent of the type of mineral admixture.     

粉煤灰水泥基材料的水化产物

用热重仪-差示扫描量热仪、扫描电子显微镜、透射电子显微镜、X射线能量散射、高分辩电子显微镜、压汞仪,测定了粉煤灰水泥基材料水化产物的形貌特征、微观结构、化学组成及水泥石的孔结构,讨论了水化产物性质及水泥石孔结构随粉煤灰掺量的变化规律。结果表明：粉煤灰的大量掺加,可以改善凝胶的化学组成。水化后期,粉煤灰与Ca(OH)2及由熟料水化生成的高n(Ca)／n(Si)的水化硅酸钙(C—S—H)凝胶发生二次水化反应,生成低n(Ca)／n(Si)的C—S—H凝胶,此种凝胶的固碱能力强,可减少碱-集料反应的危害性。同时,二次水化产物能够填充那些对水泥石强度和耐久性极为不利的孔隙空洞,使水泥石的结构更加致密,优化水泥石的孔结构,对提高水泥基材料的耐久性作用极大,为进一步提高工业废渣利用的技术水平奠定了基础。     

ICP-AES法测定粉煤灰全组分化学元素的研究

采用偏硼酸锂熔样 ,电感耦合等离子体原子发射光谱 (ICPˉAES)法对粉煤灰实现一次熔样 ,全组分同时分析。对影响光谱测量的各种因素进行了较详细的研究 ,确定了最佳测定条件。该法的检出限为 0 .0 0 9～ 0 .83 1μg·ml-1,回收率为 91.5 4%～ 10 4.45 % ,RSD <3 .2 2 %。方法准确、快速、简便 ,用于粉煤灰中全组分测定 ,结果满意。     

面向动用计划的车辆装备备件预测研究

针对动用计划下的车辆装备备件的消耗特点,研究了车辆装备维修备件消耗量和库存控制两个预测优化问题。考虑动用计划期内车辆装备的预防性维修和修复性维修,实现定时定程维修和自然随机故障维修下装备维修备件的消耗量的预测。在此基础上,根据备件库存检查方式的特点,建立基于定期检查策略的联合补货库存控制模型,根据模型的结构特点确定决策变量界限,并利用多类种群位置更新方式改进了果蝇优化算法。仿真结果表明,改进的果蝇优化算法具有良好的求解效率,本文所提出的优化方法可为车辆维修保障资源优化提供决策依据。     

用水量对胶凝砂砾石抗压强度的影响

胶凝砂砾石材料是一新型筑坝材料,拥有广阔的发展前景。用水量是影响胶凝砂砾石强度的重要因素。通过抗压强度试验分析用水量对胶凝砂砾石抗压强度的影响,得出:最优用水量随胶凝材料掺量的增大而增大,随砂率的增大而增大,最优用水量为85~125 kg/m~3;最优水胶比随胶凝材料用量的增加而减小,随龄期的增加呈减小的趋势,最优水胶比为0.95~1.35。用水量对抗压强度的影响仅次于水泥用量,在施工过程中,应将其作为胶凝砂砾石材料的一项重要参数来控制,以保证胶凝砂砾石材料的性能。     

Comparisons of Fly Ash and Deposition Between Air and Oxy-FuelCombustion in Bench-Scale Fluidized Bed with Limestone Addition

In Oxy-fuel circulating fluidized bed, the residual CaO particles may react with high concentration of CO₂ in flue gas to form bonded deposit on heat transfer surfaces in backpass when limestone is used as a sorbent to capture SO₂.In this paper, experiments were designed on ash deposition in a bench-scale fluidized bed under oxy-fuel and air atmosphere. A novel ash deposit sampling probe was used to simulate the tubes of tail surfaces. The chemical composition of fly ash and ash deposit from both air-firing and oxy-fuel firing cases were analyzed by Inductively Coupled Plasma-Atomic Emission Spectrometry(ICP-AES) and Scanning Electron Microscopy(SEM), respectively. The degrees of carbonation reaction of ash deposits were measured by Thermo Gravimetric Analysis. The results showed that there are distinct differences in fly ash deposition rate between oxy-fuel and air firing cases, and oxy-fuel combustion with limestone addition can affect chemical composition of fly ash and ash deposit, especially for elements of Ca, Na, K, and S. However, the carbonation reaction degree of ash deposits is found weak, which is due to the relatively low CaO content in ash deposit or not long enough of the sampling time.[JP]     

粉煤灰悬浮胶体的悬浮稳定性实验研究

针对煤矿生产中粉煤灰防(灭)火材料管路输送的管路阻塞问题,选择SC1,SC2,SC3,SC4,SC5,SC6,SC7和SC8共8种悬浮剂,配制成4种质量分数分别为0.5%,1.0%,1.5%和2.0%的粉煤灰悬浮胶体,采用沉降分析方法,研究其悬浮稳定性。结果表明:各粉煤灰悬浮胶体沉降速率出现类似"L型"变化,沉降到一定时间均达到平衡状态;悬浮剂可以减小粉煤灰悬浮体沉降速率变化,质量分数越低,初始沉降速率越大,质量分数越高,沉降速率变化越小;同时也可增大粉煤灰悬浮率,增加悬浮胶体的稳定性。     

Effect of curing conditions on the hydration and performance of CFBC ash cementitious system

Circulating fluidized bed combustion （CFBC） ash can be used as supplementary cementitious material for concrete production for its high pozzolanic activity. We investigated the effect of curing conditions on the hydration and performance of CFBC ash-Portland cement system （30： 70, by mass） including hydration products, paste microstructure, linear expansion ratio, chemically combined water content and compressive strength. The results show that tobermorite rather than ettringite is generated under the condition of autoclaved curing. The expansion and mortar strength of the system cured in water is higher than those cured in air at a given age, and the strength and bulk volume may retract under the condition of air curing. In addition, autoclaved curing facilitates the increase of strength gain at early curing ages （the increase rate lowers down in the following ages） and the improvement of system volume stability. It is suggested that sufficient water is necessary for the curing of CFBC ash cementitious system, and autoclaved curing may be considered where volume stability is a primary concern.