一种3V CMOS音乐集成电路的设计原理

介绍了一种数字式全定制音乐集成电路设计原理。对伪音阶发生器、节拍发生器等子电路作了较详细的叙述。采用这种原理可设计出单芯片驱动压电陶瓷和发光二极管的音乐集成电路，该电路无须外接电阻、电容，可存储数首歌曲；另外，还可设计出一种数字音频程控频率合成器，时钟为ｆ０时，可控频率范围为ｆ０２～ｆ０２Ｎ。     

煤矿许用毫秒延期电雷管研究

文中对影响煤矿许用毫秒延期电雷管沼气安全性与延期时间精度的因素进行了研究。应用正交设计研制了新的延期药配方，确定了合理的雷管结构及装配工艺参数，产品性能达到ＧＢ８０３１《工业电雷管》的规定。     

Identification of gaps in mangrove forests with airborne LIDAR

Mangrove forests change frequently due to disturbances from tropical storms, frost, lightning, and insects. It has been suggested that the death and regeneration of trees in small gaps due to lightning may play a critical role in mangrove forest turnover; however, the large-scale quantification of spatial pattern and areas of gaps is lacking for investigating this issue. Airborne light detection and ranging (LIDAR) technology provides an effective way for identifying gaps by remotely obtaining direct measurements of ground and canopy elevations. A method based on an alternative sequential filter and black top-hat mathematical morphological transformation was developed to extract gap features. Comparison of identified gap polygons with raw LIDAR measurements and field surveys shows that the proposed method successfully extracted gap features in mangrove forests in Everglades National Park. There are 400–500 lightning gaps per square kilometer in mangrove forests at the study sites. The distribution of gap sizes follows an exponential form and the area of gaps with sizes larger than 100 m² account for 55–61% of the total area of gaps. The area of gaps in the mangrove forest in Everglades National Park is about 4–5% of the total forest area and the average gap formation rate is about 0.3% of the total forest area per year, indicating that lightning gaps play an important role in mangrove forest dynamics.     

Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

Ensuring primary realization of pressure unit in the vacuum range without typically utilized static expansion system

After the break-up of Czechoslovakia in 1993 the primary metrological standards authority almost fully remained in Slovakia. So we had to build our primary vacuum metrology anew. But we could do it using uptodate techniques that are more effective and they enable us to fulfil our task more effectively and in a shorter time.The steady demand to widen the lower pressure range and a steady demand for maximal accuracy collide with the financial possibilities open to a small country. So it is impossible to follow the classical pattern for the vacuum standards: liquid columns, static expansion system and dynamic expansion system. But it is possible to utilize contemporary progress in construction of piston manometers. This enables us to discard liquid column and static expansion techniques in favour of piston technique [Tesar J, Prazak D. Vacuum 2002; 67: 311, Tesar J, Prazak D, Krajicek Z. In:Proceedings of international symposium on Pressure and Vacuum, 2003. p. 169, Tesar J, Repa P, Prazak D, Krajicek Z, Peksa L. Vacuum 2004; 76: 491.]. Such system fulfils all the needs of a little industrial country and is economically acceptable.     

数字测图,数字制图及勘测设计一体化

简述引用瑞得软件建立数字化成图系统，以进一步实现测量与工程设计一体化，使得繁琐的作业过程变为简单，缩短作业时间，不断提高生产作业效率。     

国内外电雷管电引火元件现状及改进思路

文章分析了目前国内外电引火元件的现状，列举了国外著名火炸药公司典型的几种电引火元件结构及电火参数，提出了改进我国电引火元件的技术构思。     

一种多输入队ATM交换结构

本文提出一种多输入排队ＡＴＭ交换结构和相应的输出冲突解决方法，它可以使交换网络避免输入队固有的排头阻塞，从而使网络在不增加运行速率的情况下，可达到输出排队的性能。文中介绍了冲突解决办法及其实现技术，说明它可方便地在高速网中实现。     

数字程控交换机与专网中的多媒体通信

本文以一个多媒体通信应用VISIT为实例,介绍了多媒体通信在数字程控交换机及专网中的应用情况。     

Multiresolution coding techniques for digital television: A review

Multiresolution decompositions for video coding are reviewed. Both nonrecursive and recursive coding schemes are considered. In nonrecursive schemes, it is shown that pyramid structures have certain advantages over subband or wavelet techniques, and a specific spatiotemporal pyramid coding of HDTV is discussed in some detail. It is shown that recursive, DPCM like schemes will incur a slight loss of optimality due to a restricted form of prediction if multiresolution decomposition with compatible decoding is required. Compatibility and transmission issues are also discussed. Multiresolution transmission for digital broadcast TV is introduced. This, when combined with multiresolution source coding, achieves spectrum efficiency, robustness and graceful degradation under channel impairments.Invited PaperWork supported in part by the National Science Foundation under grants ECD-88-11111, MIP-90-14189 and Bell Communications Research.Work supported by the National Science Foundation under grants ECD-88-11111. K.M. Uz is now with David Sarnoff Research Center in Princeton, NJ 08543.