剖析F型、GK型密炼机结构特征

目前，以美国F型和德国GK型为代表的密炼机已在我国基本上实现了国产化。对这两类密炼机的结构特点和安装、使用上的利与弊，本文从密炼装置、转子密封装置、卸料装置、锁紧装置到主传动5个方面作了详细的剖析，并在此基础上，提出一个取长补短的新的密炼机设计方案。     

静态混合器气液两相流压降的数值模拟及实验研究

气泡流经过静态混合器的压降问题涉及到舰船动力系统性能的好坏。在分析了气泡平均驰豫时间的基础上,结合k ε湍流模型,利用平衡流模型模拟静态混合器内形成的稀疏湍流气泡流,得到了混合器内两相流流场。空气—水系统的压力降实验表明,计算流体力学模拟能够很好地预测SMV型静态混合器内气泡流的压降,是静态混合器设计的有效手段。     

Flow patterns in granulating systems

Particle flow patterns were investigated for wet granulation and dry powder mixing in ploughshare mixers using Positron Emission Particle Tracking (PEPT). In a 4-l mixer, calcium carbonate with mean size 45 μm was granulated using a 50 wt.% solution of glycerol and water as binding fluid, and particle movement was followed using a 600-μm calcium hydroxy-phosphate tracer particle. In a 20-l mixer, dry powder flow was studied using a 600-μm resin bead tracer particle to simulate the bulk polypropylene powder with mean size 600 μm. Important differences were seen between particle flow patterns for wet and dry systems. Particle speed relative to blade speed was lower in the wet system than in the dry system, with the ratios of average particle speed to blade tip speed for all experiments in the range 0.01–0.25. In the axial plane, the same particle motion was observed around each blade; this provides a significant advance for modelling flow in ploughshare mixers. For the future, a detailed understanding of the local velocity, acceleration and density variations around a plough blade will reveal the effects of flow patterns in granulating systems on the resultant distribution of granular product attributes such as size, density and strength.     

化工搅拌器的参数优选

本文提出了确定化工用搅拌器搅拌时间的一种简单试验方法,并用正交表安排寻找最佳搅拌参数的试验和整理试验数据,得到了有实用价值的结果。     

水平带式真空过滤机的选择与应用

本文介绍了水平带式真空过滤机的特点和选用，特别讨论了往复盘水平带式真空过滤机的工作原理及主要特点，提出了应用实例及其发展方向。     

Gas/liquid dispersions with a SMX static mixer in the laminar regime

A Sulzer SMX mixer was used to disperse gas into viscous, Newtonian and non-Newtonian fluids. The investigation covered the effect of the dispersed phase volume fraction, the viscosity of the continuous phase, the mixer length and the power draw. The flow regime was kept laminar in all the experiments. The dispersion of gas was carried out with gas concentrations between 1% and 7% in volume. Using the “process viscosity” concept, it was possible to collapse all the measured sizes on a single master curve by using the energy consumption in the mixer as the common variable between the experiments. Comparison was made with a Kenics mixer. The SMX mixer was found to be better adapted to the dispersion task due to its internal structure.     

Free convection heat transfer over a horizontal plate at low prandtl number

Boundary layer equations for free convection heat transfer along a semi-infinite horizontal plate are derived by giving more importance to the energy equation. The equations are obtained for low Prandtl number and two separate polynomials are used to approximate the temperature and velocity profiles in these regions. The rate of heat transfer is compared with the available analytical and numerical results based on conventional boundary layer equations.     

球窝型动态混合器结构和机理的研究

介绍研制的题示混合器结构及其混合机理。在分析球窝流场各节点速度分布的基础上,用加权平均总应变和分流混合度作为评定指标,对球窝型混合器的混合行为进行分析。通过对比实验证明球窝型混合器对于高粘流体具有良好的混合功效。     

氯醇化管道反应新工艺的压降和传质的研究

氯醇化管道反应新工艺是环氧丙烷生产过程中关键步骤，该反应属气液非均相系统，但装有Ｋｅｎｉｃｓ型静态混合构件的管道反应器用于气液系统还缺乏大量的基础数据。研究以Ｎ２－Ｈ２Ｏ２作为实验系统，测定了不同工况下压降和氧含量，并应用一心均相模型救是了相应的摩擦系数和传质系数。     

引水隧洞复杂地质段地质超前预报综合评价

由于单一地质超前预报方法对复杂地质段预报的局限性,本文则主要通过地质编录法、瞬变电磁法、水平声波反射法三种方法的综合分析,避开各种方法局限性的影响,完成对复杂地质段的超前预报,同时成功预报一个次生断层以及该断层影响带宽度,并给施工提供合理建议,使得施工顺利进行。预报结果与实际开挖地质情况基本一致,取得了显著效果。因此,在面对复杂地质段时,应用地质编录法、瞬变电磁法、水平声波反射法综合评价地质情况,获取准确、可靠的地质超前预报结果,是一种高效、可行的组合方法之一。