无水硫酸氢钾催化合成3-烷氧基噻吩

以CuBr为催化剂,N-甲基-2-吡咯烷酮为溶剂,在110℃用3-溴噻吩与过量的甲醇钠进行取代反应合成3-甲氧基噻吩,收率为82.3%。再以无水KHSO4为催化剂,3-甲氧基噻吩分别与乙醇、丙醇、丁醇、戊醇、己醇和辛醇在105~115℃反应2.5、2.5、3、3.5、3.5和3.5h,合成了3-乙氧基噻吩、3-丙氧基噻吩、3-丁氧基噻吩、3-戊氧基噻吩、3-己氧基噻吩和3-辛氧基噻吩,收率分别为75.8%、73.5%7、0.4%、68.7%、66.3%、55.3%。这些化合物结构都通过IR1、HNMR和MS进行了表征,还进行了初步香味评价。结果表明它们都具有基本肉香味的特征。     

矿山物资计算机管理系统开发应注意的几个问题

通过云浮硫铁矿计算机动态管理系统的开发，总结出一般矿山企业物资计算机管理系统在开发过程中应注意的问题，为其它矿山企业物资计算机动态管理系统的开发提供了有益的经验。     

高选择性合成1-甲氧基-2-丙醇固体催化剂的筛选和催化作用

对碱土金属氧化物和两性氧化物等10种氧化物作为合成1 甲氧基 2 丙醇固体催化剂进行了催化性能筛选。发现在碱土金属氧化物MgO、CaO和BaO中,中强碱MgO具有较高的环氧丙烷(PO)转化率(71 07%)和1 甲氧基 2 丙醇(PPM)选择性(92 53%)。在两性氧化物中,ZnO具有较高的PO转化率(55 26%)和PPM选择性(92 37%)。系统考察了反应温度、催化剂用量、反应时间和原料摩尔配比对MgO、ZnO的催化作用特点的影响,发现MgO在催化性能和1 甲氧基 2 丙醇选择性方面表现出的综合性能优于其他催化剂。     

综合液压试验管理系统的设计与实现

介绍了一种液压试验管理系统软件的设计与实现,该软件使用Visual Basic语言编写完成,由试验流程管理和数据存储管理等几部分组成。使用该软件,试验操作人员可以自由定义试验流程和数据报表。     

PLC在电石加料装置中的应用

介绍了乙炔站电石加料装置的工艺特点,采用PLC技术,提高了电石加料装置的自动化控制水平,稳定了生产。     

Conceptual design of a novel hybrid fuel cell/desalination system

A novel concept for integrating fuel cells with desalination systems is proposed and investigated in this work. Two unique case studies are discussed — the first involving a hybrid system with a reverse osmosis (RO) unit and the second — integrating with a thermal desalination process such as multi-stage flash (MSF). The underlying motivation for this system integration is that the exhaust gas from a hybrid power plant (fuel cell/turbine system) contains considerable amount of thermal energy, which may be utilized for desalination units. This exhaust heat can be suitably used for preheating the feed in desalination processes such as reverse osmosis which not only increases the potable water production, but also decreases the relative energy consumption by approximately 8% when there is an increase of just 8°C rise in temperature. Additionally, an attractive hybrid system application which combines power generation at 70%+ system efficiency with efficient waste heat utilization is thermal desalination. In this work, it is shown that the system efficiency can be raised appreciably when a high-temperature fuel cell co-generates DC power in-situ with waste heat suitable for MSF. Results indicate that such hybrid system could show a 5.6% increase in global efficiency. Such combined hybrid systems have overall system efficiencies (second-law base) exceeding those of either fuel-cell power plants or traditional desalination plants.     

Michael addition of ethyl acrylate and acetone over solid bases

The catalytic behaviour of the superbases Na/NaOH/-Al₂O₃ and Cs_xO/-Al₂O₃ as well as of the basic zeolites Na/NaX and Cs_xO/CsX were investigated in the Michael addition of ethyl acrylate and acetone. The reactions were carried out in the liquid phase at catalyst loadings varying from 0.05 to 0.1 mol ester/g catalyst.     

碱式硫酸铬中微量Cr(6价)的测定

采用磷酸三丁酯萃取分离碱式硫酸铬中CrO2-4与Cr3+,CrO2-4被有机溶剂萃取后直接显色,通过分光光度法进行定量分析。方法加标回收率为97 6%～99 1%,变异系数1 9%。     

由粗氧化锌制备纳米活性氧化锌的研究

采用碳酸氢铵法由粗氧化锌制备纳米活性氧化锌。研究了用碳酸氢铵法由粗氧化锌制备活性氧化锌的热力学、中间体碱式碳酸锌的主要组成和碱式碳酸锌热分解的温度对形貌的影响;考察了中间体碱式碳酸锌的热分解温度和时间对纳米活性氧化锌的纯度、白度、比表面积和表观密度的影响。碱式碳酸锌焙解生成纳米活性氧化锌适宜的温度和时间分别为600℃和1h时,产品中氧化锌的质量分数为97.6%,粒度<100nm,比表面积50m2/g,表观密度0.21g/cm3。