Textural quality of sweet dumpling: effect of germination of waxy rice

Effects of germination on components and structural changes of rice flours and, in turn, rheological properties and textural attributes of sweet dumplings were investigated in this study. Germination decreased starch, protein and lipid content, while slightly increased free amino acids content. Starch granular surface corroded, crystalline structure disrupted, and short-range ordered structures and helical structures decreased with germination. Moreover, germination resulted in a decreased paste viscosity and gel intensity of flour and a reduction of hardness and adhesiveness of dumplings. According to the Pearson’s correlation analysis, flours components and starch structures were significantly correlated with flours rheological properties that determined textural attributes of sweet dumplings. The germination contributed to significant changes in flours components and starch structures, which suggested the pretreatment of germination of waxy rice could be a promising pathway to control textural properties of sweet dumplings.     

摩擦变形量对异种金属摩擦焊组织和性能影响研究

针对摩擦变形量对异种金属的焊接质量影响情况认识不充分这一问题,开展了摩擦变形量对焊缝组织及力学性能影响规律的研究。基于微观组织、显微硬度和力学性能的对比分析,对调质态42CrMo与正火态36Mn2V管材不同摩擦变形量的连续驱动摩擦焊进行了研究,为其在工程应用提供理论依据。     

An adaptive modeling and asset allocation approach to financial markets based on discrete microstructure model

In previous works, it was verified that the discrete-time microstructure (DTMS) model, which is estimated by training dataset of a financial time series, may be effectively applied to asset allocation control on the following test data. However, if the length of test dataset is too long, prediction capability of the estimated DTMS model may gradually decline due to behavior change of financial market, so that the asset allocation result may become worse on the latter part of test data. To overcome the drawback, this paper presents a semi-on-line adaptive modeling and trading approach to financial time series based on the DTMS model and using a receding horizon optimization procedure. First, a long-interval identification window is selected, and the dataset on the identification window is used to estimate a DTMS model, which will be used to do asset allocation on the following short-term trading interval that is referred to as the trading window. After asset allocation is over on the trading window, the length-fixed identification window is then moved to a new window that includes the previous trading window, and a new DTMS model is estimated by using the dataset on the new identification window. Next, asset allocation continues on the next trading window that follows the previous trading window, and then the modeling and asset allocation process will go on according to the above steps. In order to enhance the flexibility and adaptability of the DTMS model, a comprehensive parameter optimization method is proposed, which incorporates particle swarm optimization (PSO) with Kalman filter and maximum likelihood method for estimating the states and parameters of DTMS model. Based on the adaptive DTMS model estimated on each identification window, an adaptive asset allocation control strategy is designed to achieve optimal control of financial assets. The parameters of the asset allocation controller are optimized by the PSO algorithm on each identification window. Case studies on Hang Seng Index (HSI) of Hong Kong stock exchange and S&P 500 index show that the proposed adaptive modeling and trading strategy can obtain much better asset allocation control performance compared with the parameters-fixed DTMS model.     

Effect of boron addition on the microstructure and stress-rupture properties of directionally solidified superalloys

This study is focused on the effect of boron addition, in the range of 0.0007wt% to 0.03wt%, on the microstructure and stress-rupture properties of a directionally solidified superalloy. With increasing boron content in the as-cast alloys, there is an increase in the fraction of the γ′/γ eutectic and block borides precipitate around the γ′/γ eutectic. At a high boron content of 0.03wt%, there is precipitation of lamellar borides. Upon heat treatment, fine block borides tend to precipitate at grain boundaries with increasing boron content. Overall, the rupture life of the directionally solidified superalloy is significantly improved with the addition of nominal content of boron. However, the rupture life decreases when the boron content exceeds 0.03wt%.     

Metallurgical Studies of Austenitic Stainless Steel 304 under Warm Deep Drawing

Austenitic stainless steel 304 was deep drawn with different blank diameters under warm conditions using 20 t hydraulic press. A number of deep drawing experiments both at room temperature and at 150 ℃ were conducted to study the metallography. Also, tensile test experiments were conducted on a universal testing machine up to 700 ℃ and the broken specimens were used to study the fractography of the material using scanning electron microscopy in various regions. The microstructure changes were observed at limiting draw ratio （LDR） when the cup is drawn at different temperatures. In austenitic stainless steel, martensite formation takes place that is not only affected by temperature, hut also influenced by the rate at which the material is deformed. In austenitic stainless steel 304, dynamic strain regime appears above 300 ℃ and it decreases the formability of material due to brittle fracture as studied in its fractography. From the metallographic studies, the maximum LDR of the material is observed at 150 ℃ before dynamic strain regime. It is also observed that at 150 ℃, grains are coarse in the drawn cups at LDR.     

Effect of blanching and drying treatments on quality of bamboo shoot slices

The enzymes activity, texture, pectin, microstructure and colour change in bamboo shoots (Dendrocalamus latiflorus) were examined to evaluate the effect of blanching and drying treatments on quality of bamboo shoot slices (BSS). Peroxidase (POD), phenylalanine ammonia‐lyase and polyphenol oxidase in BSS will become completely inactive at 95 °C for 6‐, 9‐ and 12‐min blanching treatments, respectively. The hardness and protopectin (PP) content decreased after the blanching treatment. Meanwhile, the content of water‐soluble pectin increased initially and then decreased gradually during the blanching. After the blanching treatment, the L* and a* of BSS decreased, while b* increased, ΔE > 2. The hardness of rehydrated BSS decreased by 43.57% after freeze drying (FD), which, however, decreased more after hot air drying (HAD). The pectin of rehydrated BSS was also determined to explain the hardness change in BSS. The BSS acquired similar microstructure of fresh samples after FD, while microstructure of BSS was severely damaged after HAD. The colour of BSS changes significantly after drying treatment. However, FD can maintain better colour of BSS than HAD. The results may provide a reference for industrial production of BSS.     

Synthesis of trimethylene carbonate/ϵ‐caprolactone copolymers initiated with zinc alkoxide: influence of copolymer chain microstructure on thermal and mechanical properties

Ethylzinc(II ) ethoxide is a highly active and efficient initiator for the bulk polymerization of 1,3‐trimethylene carbonate and its copolymerization with ? ‐caprolactone. This initiator allows one to obtain (co)polymers with high molar masses in quite a short time. Significant difference in co‐monomer reactivity and relatively low participation of intermolecular transesterification processes lead to the obtained copolymers being characterized by a gradient chain microstructure. In ¹³C NMR spectra, in all regions, we observed the presence of triads which were distinctly represented by four peaks for the carbonyl signal. Mechanical tests showed that copolymers containing 70% and more of ? ‐caprolactone presented a relatively high Young's modulus and a very high maximum elongation factor; therefore these materials are promising in many biomedical applications. Due to the high reaction rate, we also made an attempt at copolymerization using reactive extrusion which gave promising results. © 2017 Society of Chemical Industry     

Critical assessment 29: TRIP-aided bainitic ferrite steels

Transformation-induced plasticity (TRIP)-aided bainitic ferrite steels developed for automotive applications have attractive mechanical properties such as ductility, formability, toughness, fatigue strength and delayed fracture strength. These mechanical properties are principally associated with a ductile lath-structure matrix and the strain-induced transformation of the metastable-retained austenite films of 3–20 vol.%. In this paper, data on the microstructural and mechanical properties of the low-carbon TRIP-aided bainitic ferrite steels are critically assessed, as well as their deformation mechanism.