缩短机械加工中零件等待时间的方法讨论

在机械制造系统中，零件在各工序间加工及流转，一般情况下许多工序难免存在零件等待加工的现象。为了提高系统的加工性能，本文利用现代仿真技术及排队论，通过优化工件在各相关工序的加工时间，从而消除工序中存在的工件等待加工现象。文章提出的方法还可用来预测机械制造系统的运行性能、比较各种可供选择的方案以及实现制造系统决策的优化。     

基于DSP芯片的斜齿轮插齿数控加工技术研究

国内斜齿轮加工一般采用滚齿机或者进口插齿机,由于产品体积过大和机床价格昂贵而受到限制.文章对采用DSP芯片的数控插齿加工技术进行了研究,提出了虚拟轴插补技术以及用软件实现电子齿轮差动技术,利用DSP芯片的高速处理能力进行跟踪插补,经初步试验证明该方法理论上可行,实际中可以运用.     

锻模型腔的电解加工技术

通过电解加工与其它常用加工方法的比较，以及电解加工应用的实例，论证了电解加工是提高锤模型腔加工水平的重要工艺手段。     

An investigation of ultrasonic-assisted electrical discharge machining in gas

This study focuses on using ultrasonic to improve the efficiency in electrical discharge machining (EDM) in gas medium. The new method is referred to as ultrasonic-assisted electrical discharge machining (UEDM). In the process of UEDM in gas, the tool electrode is a thin-walled pipe, the high-pressure gas medium is applied from inside, and the ultrasonic actuation is applied onto the workpiece. In our experiment, the workpiece material is AISI 1045 steel and the electrode material is copper. The experiment results indicate that (a) the Material Removal Rate (MRR) is increased with respect to the increase of the open voltage, the pulse duration, the amplitude of ultrasonic actuation, the discharge current, and the decrease of the wall thickness of electrode pipe; and (b) the surface roughness is increased with respect to the increase of the open voltage, the pulse duration, and the discharge current. Based on experimental results, a theoretical model to estimate the MRR and the surface roughness is developed.     

电火花加工与加工中心的集成

提出了一种新的复合型机床——在加工中心上进行电火花加工的机床，研究了电火花加工与加工中心集成所存在的主要技术要求，提出并设计了伺服控制系统，介绍了伺服控制系统的原理。为验证这个想法的合理性，在普通的铣床上进行了模拟集成试验并进行了分析与评价。     

Feedrate optimization and tool profile modification for the high-efficiency ball-end milling process

Trend in die/mold machining is to produce highly quailed surface using the high-speed hard machining with the ball-end cutter. The ball-end milling is, however, less efficiency than the flat end milling. It is important to optimize the feedrate that gives the maximum material removal rate constrained by an allowable surface roughness. The state-of-art of the CBN ball-end cutter technology allows increasing the tooth feed for high-speed and high-efficiency machining. However, because the spherical shape of the cutter can result in the scallop-liked cusps on the machined surface, the surface roughness consideration makes a feedrate limitation to the CBN cutter. In this paper, the optimization of the feedrate by considering the generated-scallop effect of the ball-end cutter has been studied. It was found that the tooth feed must be kept within one third of the path pick in order to keep the feed-interval scallop height not over the path-interval scallop height. Therefore, the potential capability of the CBN cutter for the larger tooth feed (i.e. high efficient) machining can not be fully exploited. It was found a notch-cut on the center of the ball-end cutter reduced the feed-interval cusp height, thus allowing an increased feedrate of more than 50% compared with the standard ball-end cutter. If the parameters of the notch-cut profile can be optimized, it is believed that the feedrate can be further increased.     

Virtual machining considering dimensional,geometrical and tool deflection errors in three-axis CNC milling machines

Virtual manufacturing systems can provide useful means for products to be manufactured without the need of physical testing on the shop floor. As a result, the time and cost of part production can be decreased. There are different error sources in machine tools such as tool deflection, geometrical deviations of moving axis and thermal distortions of machine tool structures. Some of these errors can be decreased by controlling the machining process and environmental parameters. However other errors like tool deflection and geometrical errors which have a big portion of the total error, need more attention. This paper presents a virtual machining system in order to enforce dimensional, geometrical and tool deflection errors in three-axis milling operations. The system receives 21 dimensional and geometrical errors of a machine tool and machining codes of a specific part as input. The output of the system is the modified codes which will produce actual machined part in the virtual environment.     

Theoretical studies of displacement deposition of nickel into porous silicon with ultrahigh aspect ratio

A model is developed to address the uniformity of displacement deposition of nickel inside porous silicon with an ultrahigh aspect ratio as high as 200. The nickel distribution is treated as a current distribution issue as in electrodeposition. It is shown that the deposition distribution along the pore depth exhibits a strong dependence on a polarization parameter ξ. High values of ξ correspond to mass transport limitations and lead to non-uniform distributions, whereas small ξ values, representing interfacial reaction control, produce uniform distributions. Non-uniform deposition primarily occurs at an initial stage in which the reaction is dominated by mass transfer. As the deposition process continues, the deposition rate drops to a low value, and the deposition uniformity shifts from Ni²⁺ mass transport limitations to its interfacial reaction control, leading to uniform Ni²⁺ concentration and deposition rate distributions. It is predicted that the non-uniformity at the initial stage could be remedied by increasing the bulk concentration of the nickel ions and decreasing the plating bath pH. In addition, the uniformity of the deposition distribution can be significantly improved by introducing inhibiting additive coumarin to the plating solution.     

少齿差减速器偏心轴及偏心套加工工艺研究

针对具有较高精度的偏心轴及偏心套加工问题,采用了组合式工艺偏心轴——套,并利用电火花线切割保证偏心精度。     

Surface performance of workpieces processed by electrical discharge machining in gas

The surface performance of workpieces processed by electrical discharge machining in gas(dry EDM)was studied in this paper.Firstly,the composition,micro hardness and recast layer of electrical discharge machined(EDMed)surface of 45 carbon steels in air were investigated through different test analysis methods.The results show that the workpiece surface EDMed in air contains a certain quantity of oxide,and oxidation occurs on the workpiece surface.Compared with the surface of workpieces processed in kerosene,fewer cracks exist on the dry EDMed workpiece surface,and the surface recast layer is thinner than that obtained by conventional EDM.The micro hardness of workpieces machined by dry EDM method is lower than that machined in kerosene,and higher than that of the matrix.In addition,experiments were conducted on the surface wear resistance of workpieces processed in air and kerosene using copper electrode and titanium alloy electrode.The results indicate that the surface wear resistance of workpieces processed in air can be improved,and it is related with tool material and dielectric.