多层建筑中楼梯部分对整体结构的地震影响分析

楼梯做为建筑结构的重要组成部分,其在使用过程中发挥着极其重要的作用。采用SAP2000有限元软件模拟工程中常见的几种楼梯布置方案进行数学建模,来分析地震对结构影响情况。分析结果表明,楼梯的布置位置不同对结构的内力、位移等有着很大的影响,在设计中应该加以重视。     

一种基于邓氏关联度的图像边缘检测新方法

边缘检测主要是对图像的灰度变化进行度量、检测和定位。基于边缘检测的灰色系统理论中的邓氏关联度分析方法对处理非典型规律的图像数据与其它一些方法相比,具有明显的优势。根据邓氏关联度分析方法建立的改进模型,结合仿射变换和最小二乘法直线拟合,一定程度上克服了邓氏关联度分析方法的比例因子影响和位移差,实验证明在检测边缘点的连续性、完整性方面比用邓氏关联度模型检测的边缘有一定的改进。     

一种新型的三参量传感器

单参量传感器（加速度计、速度计或位移计）只能输出一种参量。本文介绍一种三参量转换器,可与任何一种单参量传感器组成一套完整的三参量传感器,可同时输出加速度、速度和位移三种参量。分析了三参量转换器的基本原理及构成三参量传感器的方法,给出了实测数据和相关的技术指标。构成的新型三参量传感器已在工程振动、强地震动等领域的测量中得到应用,取得了满意的效果。     

Optimization of clamped circular piezoelectric composite actuators

This paper addresses the design of clamped circular piezoceramic composite unimorph and bimorph configurations, specifically the conflicting requirements of maximum volume displacement for a prescribed bandwidth. An optimization problem is formulated that implements analytical solutions for unimorph and bimorph configurations using laminated plate theory, including the use of oppositely polarized piezoceramic patches. A range of actuator geometric parameters are studied, and bounds for volume displacement and natural frequency of optimal designs are determined and presented via design curves. In the selected design space, Pareto optimization results for unimorph and bimorph configurations show that optimal volume displacement is related to the bandwidth by a universal power law such that the product of the square of the natural frequency and the displaced volume, a “gain-bandwidth” product, is a constant. Characteristic trends are also described that are independent of the actuator radius for the Pareto optimal piezoceramic patch thickness and radius versus normalized bandwidth. The results are relevant, for example, in the design of zero-net mass-flux or synthetic jet actuators used in flow control applications.     

新型转炉系统整体结构三维有限元分析

为考察大型转炉系统应力和变形对生产安全和结构优化设计的影响,采用三维有限元方法,建立新型转炉的整体结构装配体模型,计算该转炉系统在不同倾动角工况及重力载荷下的应力和位移. 通过详细分析各零部件的应力、变形和位移情况,研究应力和位移随倾动角的变化规律,提出改进设计方案. 结果可为转炉系统的设计和应用提供计算依据.     

基础位移激励下椭圆抛物面碳纤维索网的振动

在考虑温度变化的基础上,研究椭圆平面双曲抛物面碳纤维索网在基础激励下的非线性振动问题,建立了椭圆平面双曲抛物面碳纤维索网在基础位移激励下的非线性振动方程,采用Galerkin原理及KBM法求得了椭圆平面双曲抛物面碳纤维索网非线性振动的近似解．在把碳纤维索网与钢丝索网比较的基础上,讨论分析了位移激励、温度、振幅、外阻尼等因素对椭圆平面双曲抛物面碳纤维索网非线性振动的影响,得到了碳纤维索网对温度变化不敏感,而钢丝索网受温度的影响却很大,且碳纤维索网振动特性优于钢丝索网振动特性的结论．     

CMOS图像传感器辐照损伤效应仿真模拟研究进展

CMOS图像传感器(CIS)工作在空间辐射或核辐射环境中遭受的辐照损伤问题备受关注。对CIS辐照损伤效应进行仿真模拟研究有助于深入揭示辐照损伤机理,进而开展抗辐射加固设计,有效提升CIS抗辐照能力。文章通过梳理国内外开展CIS辐照损伤效应仿真模拟研究方面的进展情况,结合课题组已开展的电子元器件辐照效应仿真模拟和实验研究基础,从CIS器件建模、时序驱动电路建模、辐照损伤效应建模、仿真模拟结果校验等方面探讨了CIS辐照损伤效应的仿真模拟方法,分析总结了当前CIS辐照效应仿真模拟研究中亟待解决的关键技术问题。     

Anticipating Cutoff Diameters in Deterministic Lateral Displacement (DLD) Microfluidic Devices for an Optimized Particle Separation

Deterministic lateral displacement (DLD) devices enable to separate nanometer to micrometer‐sized particles around a cutoff diameter, during their transport through a microfluidic channel with slanted rows of pillars. In order to design appropriate DLD geometries for specific separation sizes, robust models are required to anticipate the value of the cutoff diameter. So far, the proposed models result in a single cutoff diameter for a given DLD geometry. This paper shows that the cutoff diameter actually varies along the DLD channel, especially in narrow pillar arrays. Experimental and numerical results reveal that the variation of the cutoff diameter is induced by boundary effects at the channel side walls, called the wall effect. The wall effect generates unexpected particle trajectories that may compromise the separation efficiency. In order to anticipate the wall effect when designing DLD devices, a predictive model is proposed in this work and has been validated experimentally. In addition to the usual geometrical parameters, a new parameter, the number of pillars in the channel cross dimension, is considered in this model to investigate its influence on the particle trajectories.     

The Grid Method for In‐plane Displacement and Strain Measurement: A Review and Analysis

The grid method is a technique suitable for the measurement of in‐plane displacement and strain components on specimens undergoing a small deformation. It relies on a regular marking of the surfaces under investigation. Various techniques are proposed in the literature to retrieve these sought quantities from images of regular markings, but recent advances show that techniques developed initially to process fringe patterns lead to the best results. The grid method features a good compromise between measurement resolution and spatial resolution, thus making it an efficient tool to characterise strain gradients. Another advantage of this technique is the ability to establish closed‐form expressions between its main metrological characteristics, thus enabling to predict them within certain limits. In this context, the objective of this paper is to give the state of the art in the grid method, the information being currently spread out in the literature. We propose first to recall various techniques that were used in the past to process grid images, to focus progressively on the one that is the most used in recent examples: the windowed Fourier transform. From a practical point of view, surfaces under investigation must be marked with grids, so the techniques available to mark specimens with grids are presented. Then we gather the information available in the recent literature to synthesise the connection between three important characteristics of full‐field measurement techniques: the spatial resolution, the measurement resolution and the measurement bias. Some practical information is then offered to help the readers who discover this technique to start using it. In particular, programmes used here to process the grid images are offered to the readers on a dedicated website. We finally present some recent examples available in the literature to highlight the effectiveness of the grid method for in‐plane displacement and strain measurement in real situations.     

第三代激光干涉仪

微片激光自混合干涉仪原理上与迈克尔荪干涉仪不同。主要差别是：激光自混合干涉仪的光束照射在被测物上并被反射回激光器被激光器内放大介质放大。作者课题组研究的的激光自混合干涉仪的测量速度达到了1 m/s以上,10 m空程的环境误差小到了40 nm。它具有全固态,可测“黑”目标的位移等性能,又达到了传统激光干涉仪的技术指标。如果第一代光学干涉仪是以光谱灯做光源,第二代光学干涉仪是以HeNe气体激光器做光源的话,固体激光自混合干涉仪因其激光“自混合”原理可看成是第三代激光干涉仪。