炭素厂的消烟除尘和噪声控制

针对炭素制品生产过程产生的粉尘、沥青烟气、噪声等主要涉及工业卫生及环境保护等方面的问题进行剖析，并对治理方法做了简要的介绍。     

Experimental design in soap manufacturing for optimization of fuzzified process capability index

In manufacturing industries, the quality of a product depends on the combined effect of multiple input variables working singly or together and therefore attention has been given on process capability indices to shift from single to multivariate domain. In case of multivariable domain the capability to incorporate uncertainties at the time of decision making becomes necessary. Fuzzy system is introduced to take care of this requirement. In this article the process parameters of soap manufacturing industries have been analyzed. The process capability is determined using Fuzzy Inference System rule editor based on a set of justified if then statements as applicable for the process. The data has been collected in linguistic form to derive its process capability, using a set of justified rules and the effect of each factor has been determined using Design of Experiments (DoE) and analysis of variance technique (ANOVA) for improving the soap quality from perspective of its softness. This article ventures to propose a new methodology by integrating Fuzzy with DoE providing better result followed by DoE and Fuzzy Inference system in isolation.     

一次风机节能改造

为解决一次风机出口风压低、火焰无力度、系统功耗高等问题,采用空气悬浮风机对其进行节能改造。拆除原有的一次风机备用风机,在原有底座上安装空气悬浮风机,整体设计安装悬浮风机出口管道。改造后,一次风机出口风压明显增大,煤粉燃烧充分,火焰调整灵活,每小时可节电30kWh,两处对空排放管道加装消声器,降噪效果显著。     

具有数据包丢失的离散随机不确定系统的线性最优满阶估值器

研究了具有数据包丢失和随机不确定性离散随机线性系统的状态估计问题.其中数据包丢失是随机的,且满足Bernoulli分布,系统矩阵中的随机不确定性由一个白色乘性噪声来描述.首先,通过配方方法,提出了最小均方意义下的无偏最优线性递推满阶滤波器.所提出的滤波器用到了当前时刻和最近时刻接收到的观测来保证线性最优性.与多项式滤波和增广滤波器相比,本文的滤波器具有较小的计算负担.然后,基于所获得的线性滤波器推导了线性最优预报器和平滑器.进一步研究了线性最优估值器的渐近稳定性,给出了稳态特性存在的一个充分条件.最后,通过两个仿真例子验证了所提估计算法的优越性.     

EMD-IT去噪算法的阈值估计方法

为解决EMD-IT去噪算法中阈值难以确定的问题,提出一种基于高斯白噪声能量分布的阈值估计方法。将含噪信号进行经验模态分解并估计各固有模态函数(IMF)中噪声的能量;根据模态单元阈值的含义,在各IMF中利用去除掉的模态单元包含的总能量等于噪声能量这一准则估计阈值。合成数据和实际心电信号的去噪仿真实验验证了该方法的有效性,其是自适应的且避免了阈值选择的主观性。     

基于引力搜索算法的分数阶变异时序回归GSA-TSGM(1,1)模型

为了利用分数阶累加算子在灰色短期预测中的高效性能,首次将分数阶累加算子引入变异时序回归模型以期取得更高的预测精度。主要方法如下：首先取湖北省链子崖某监测点1978—1987年的十年数据作为训练集并使用引力搜索算法确定最佳分数阶累加阶数,而1988—1993年的六年数据作为验证集验证提出的模型;其次对比了经典灰色模型GM(1,1)、分数阶累加灰色模型、变异时序回归模型TSGM(1,1)三种灰色模型。结果如下：首先修正了陈西江等人变异时序回归模型仿真时出现的错误,其次表明了相比于其他的模型,基于引力搜索算法的分数阶累加时序回归模型在进行灰色长期预测中具有较高的预测精度。因此,通过分数阶累加算子提高了灰色理论中长期预测模型的精度,为灰色长期预测提供了指导。     

大型活塞式压缩机异常振动的原因及对策

对我公司的1台6列M型活塞式压缩机组振动和噪声异常以及一级、二级连杆大头瓦快速失效的原因进行了分析。研究并实施了在轴系上加装配重体，以适度增大轴系的转动惯量来调整轴系扭转振动固有频率的改造措施，有效消减了轴系的扭转振动，大幅度减小了机组的振动和噪声，提高了连杆大头瓦的使用寿命。     

A general non-local denoising model using multi-kernel-induced measures

Noises are inevitably introduced in digital image acquisition processes, and thus image denoising is still a hot research problem. Different from local methods operating on local regions of images, the non-local methods utilize non-local information (even the whole image) to accomplish image denoising. Due to their superior performance, the non-local methods have recently drawn more and more attention in the image denoising community. However, these methods generally do not work well in handling complicated noises with different levels and types. Inspired by the fact in machine learning field that multi-kernel methods are more robust and effective in tackling complex problems than single-kernel ones, we establish a general non-local denoising model based on multi-kernel-induced measures (GNLMKIM for short), which provides us a platform to analyze some existing and design new filters. With the help of GNLMKIM, we reinterpret two well-known non-local filters in the united view and extend them to their novel multi-kernel counterparts. The comprehensive experiments indicate that these novel filters achieve encouraging denoising results in both visual effect and PSNR index.     

Preliminary evaluation of the anticorrosive properties of aircraft coatings by electrochemical methods

Strict regulations concerning the content of volatile organic compounds (VOCs) and heavy metals (Cr⁶⁺) in aircraft coating systems have increased the economic burden of the United States Air Force (USAF) in the area of coating maintenance. To this end, it is critical to have methods to characterize new coating systems in such a manner that the data can be used to predict accurately and reliably the expected lifetime of the coatings in service. Electrochemical noise method (ENM) and electrochemical impedance spectroscopy (EIS) are two techniques used to monitor extent and rate of corrosion. The USAF is currently employing these methods in order to supplement data acquired from traditional salt-spray methods. ENM and EIS are used to evaluate each component of the coating system and its contribution to corrosion prevention. Preliminary evaluations of an aircraft coating system on aluminum substrate (Al 2024-T3) produces resistance noise values of 10⁶ to 10⁷ Ω/cm². It is hoped that these results will form the basis of coatings that give increased USAF fleet service life and reduction in maintenance manpower and materials costs.     

New results on PWARX model identification based on clustering approach

This paper deals with the problem of piecewise auto regressive systems with exogenous input(PWARX) model identification based on clustering solution. This problem involves both the estimation of the parameters of the affine sub-models and the hyper planes defining the partitions of the state-input regression. The existing identification methods present three main drawbacks which limit its effectiveness. First, most of them may converge to local minima in the case of poor initializations because they are based on the optimization using nonlinear criteria. Second, they use simple and ineffective techniques to remove outliers. Third, most of them assume that the number of sub-models is known a priori. To overcome these drawbacks, we suggest the use of the density-based spatial clustering of applications with noise(DBSCAN) algorithm. The results presented in this paper illustrate the performance of our methods in comparison with the existing approach. An application of the developed approach to an olive oil esterification reactor is also proposed in order to validate the simulation results.