Inclined Substrate Deposition of Nanostructured TiO2 Thin Films for DSSC Application

Nanostructured TiO₂ films were deposited onto Indium Tin Oxide (ITO) and glass substrates by dc reactive magnetron sputtering at different substrate inclination angles. The structural and optical properties of the deposited films were studied by X-ray diffraction, scanning electron microscopy and UV–Vis spectrophotometer, respectively. Dye-sensitized solar cells (DSSC) were assembled using these TiO₂ films as photoelectrodes and the effect of the substrate inclination angle in the preparing process of TiO₂ films on the DSSC conversion efficiency was studied.     

V掺杂ZnO透明导电薄膜研究

本文分别采用磁控溅射技术与基于密度泛函理论的平面波赝势方法两种方式, 对高价态差元素V掺杂ZnO薄膜进行研究. 实验研究结果表明: V的掺入并未改变ZnO的生长方式, 所制备的薄膜都呈(002)择优生长; 随着衬底温度增加, VZO薄膜的结晶质量逐步改善, 当衬底温度超过280 ℃时薄膜的结晶质量恶化; 在280 ℃时获得的VZO薄膜电阻率最低3.8×10^-3 Ω·m, 500-2000 nm平均透过率高于85%. 理论模拟结果表明: V以替位形式掺入ZnO六角纤锌矿晶格结构中, 费米能级进入导带, 材料表现出n 型半导体的特性, 导电电子主要由V 3d及O 2p电子轨道提供. 理论计算结果与实验结果的一致性, 表明VZO薄膜具有作为高效Si基薄膜太阳电池透明导电薄膜的应用潜力.     

Electric field induced metal–insulator transition in VO2 thin film based on FTO/VO2/FTO structure

A VO₂ thin film has been prepared using a DC magnetron sputtering method and annealing on an F-doped SnO₂ (FTO) conductive glass substrate. The FTO/VO₂/FTO structure was fabricated using photolithography and a chemical etching process. The temperature dependence of the I–V hysteresis loop for the FTO/VO₂/FTO structure has been analyzed. The threshold voltage decreases with increasing temperature, with a value of 9.2 V at 20 °C. The maximum transmission modulation value of the FTO/VO₂/FTO structure is 31.4% under various temperatures and voltages. Optical modulation can be realized in the structure by applying an electric field.     

Theoretical stability,thin film synthesis and transport properties of the Mon +1GaCn MAX phase

The phase stability of Mo_{n +1}GaC_n has been investigated using ab‐initio calculations. The results indicate stability for the Mo₂GaC phase only, with a formation enthalpy of –0.4 meV per atom. Subsequent thin film synthesis of Mo₂GaC was performed through magnetron sputtering from elemental targets onto Al₂O₃ [0001], 6H‐SiC [0001] and MgO [111] substrates within the temperature range of 500 °C and 750 °C. High structural quality films were obtained for synthesis on MgO [111] substrates at 590 ºC. Evaluation of transport properties showed a superconducting behavior with a critical temperature of approximately 7 K, reducing upon the application of an external magnetic field. The results point towards the first superconducting MAX phase in thin film form. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Thickness effect on the band gap of magnetron sputtered Pb45Se45O10 thin films on Si

Oxygen doped PbSe thin films with different thickness were grown on the Si (100) substrates by magnetron sputtering, and characterized using scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and physical properties measurement system. As the film thickness increased, the intensity of the (200) PbSe prominent diffraction peak increased, while the (220) peak almost vanished, indicating the primary growth direction. The change rate between the light and dark resistance increased with the film thickness, and the maximum of 64.76% was obtained. According to the density functional theory calculations and the experimental results, the band gap of the PbSe thin films decreased from 0.278 eV to 0.21 eV when doped with oxygen. Doping with oxygen during the deposition process is a viable way to prepare PbSe thin films with a tunable band gap. The band gap increased almost linearly with the lattice constant, confirmed by the calculated and experimental results.     

Surface characteristics and electrochemical behaviour of sputter-deposited NiTi thin film

Thin nanocrystalline amorphous NiTi film was deposited on Si substrate using DC magnetron sputtering. The as-deposited NiTi thin film was crystallized by heat treatment at 500 °C for 1 h. The crystal structure, surface morphology, microstructure and surface chemistry of the deposited films were studied using X-ray diffraction, atomic force microscopy, scanning electron microscopy and X-ray photoelectron spectroscopy (XPS), respectively. Corrosion behaviour was assessed in Ringer’s solution at 37 °C by open circuit potential (OCP), potentiodynamic polarization and electrochemical impedance spectroscopy as a function of exposure time. OCP values indicate that the tendency for the formation of a spontaneous oxide film is greater for the NiTi thin films than the bulk NiTi. Long time exposure to Ringer’s solution was found to have a great effect on the corrosion behaviour of the samples. Significantly low corrosion current density was obtained for the annealed NiTi film from the potentiodynamic polarization curves indicating a typical passive behaviour, but as-deposited film and bulk NiTi alloy exhibited breakdown of passivity at potentials approximately +1.4 V (vs. SCE). XPS showed that the oxide film formed on the annealed NiTi thin film mainly composed of Ti oxides, and no evidence of Ni was found up to 8.2 nm beneath the top surface, suggesting the excellent corrosion resistance of this sample in Ringer’s solution.     

Thickness dependent magnetic and ferroelectric properties of LaNiO3 buffered BiFeO3 thin films

BiFeO₃ (BFO) thin films with thickness increasing from 40 to 480 nm were successfully grown on LaNiO₃ (LNO) buffered Pt/Ti/SiO₂/Si(100) substrate and the effects of thickness evolution on magnetic and ferroelectric properties are investigated. The LNO buffer layer promotes the growth and crystallization of BFO thin films. Highly (100) orientation is induced for all BFO films regardless of the film thickness together with the dense microstructure. All BFO films exhibited weak ferromagnetic response at room temperature and saturation magnetization is found to decrease with increase in film thickness. Well saturated ferroelectric hysteresis loops were obtained for thicker films; however, the leakage current dominated the ferroelectric properties in thinner films. The leakage current density decreased by three orders of magnitude for 335 nm film compared to 40 nm film, giving rise to enhanced ferroelectric properties for thicker films. The mechanisms for the evolution of ferromagnetic and ferroelectric characteristics are discussed.     

Fabrication of Cu2ZnSn(SxSe1−x)4 thin film solar cell by single step sulfo-selenization of stacked metallic precursors

We have synthesized an efficient Cu₂ZnSn(S_xSe_1−x)₄ (CZTSSe) absorbers by using single-step rapid thermal sulfo-selenization process of sputtered stack metallic precursor (Zn/Sn/Cu) films. The structural and morphological studies confirm that the suitability of the rapid thermal sulfo-selenization process for the synthesis of a CZTSSe absorber without any secondary phases with large grains. The annealing atmosphere with a mixed-chalcogen source enhances the grain growth of the CZTSSe absorber as compared with pure Cu₂ZnSnS₄ (CZTS) and Cu₂ZnSnSe₄ (CZTSe) absorbers. The CZTSSe thin film solar cell shows the best conversion efficiency of ∼7%.     

Electrical and optical properties of Si-doped indium tin oxides as transparent electrode and anti-reflection coating for solar cells

We have studied the electrical and optical properties of Si-doped indium tin oxides (ITSOs) as transparent electrodes and anti-reflection coatings for Si-based solar cells. The ITSO thin films were obtained by co-sputtering of ITO and SiO₂ targets under target power control. The resistivity of the ITSO thin films deposited at 0.625 in terms of power ratio (ITO/SiO₂) were 391 Ωcm. In this condition, the ITSO thin films showed very high resistivity compared to sputted pure ITO thin films (1.08 × 10⁻³ Ωcm). However, refractive index of ITSO thin films deposited at the same condition at 500 nm is somewhat lowered to 1.97 compared to ITO thin films (2.06). The fabricated graded refractive index AR coatings using ITO, ITSO, and SiO₂ thin films kept over 80% of transmittance regardless of their thickness varing from 97 nm to 1196 nm because of their low extinction coefficient. As the AR coating with graded refractive indices using ITO, ITSO, and SiO₂ layers was applied to general silicon-based solar cell, the current level increased nearly twice more than that of bare silicon solar cell without AR coating.     

Thin-film multi-layer capacitors using Bi2Mg2/3Nb4/3O7 (BMNO) pyrochlore thin films via radio-frequency sputtering

Thin-film multi-layer ceramic capacitors (MLCCs) were prepared using high-dielectric constant Bi₂Mg_2/3Nb_4/3O₇ thin-films deposited at room temperature via radio-frequency magnetron sputtering. The multi-layer capacitors, in sizes 0402, 0603 and 1005, were well equipped with both inner and outer Cu electrodes. The capacitances of the bi-layer capacitors were twice that of the single-layer version in sizes 0402, 0603, and 1005. The 200 nm-thick Bi₂Mg_2/3Nb_4/3O₇ thin-films would be suitable for thin-film multi-layer capacitor applications.