糠醛注水——润滑油糠醛精制装置的节能途径

介绍了用水稀释糠醛使润滑油糠醛精制装置节能的途径。通过注水——糠醛－水溶液（含水９５％左右），可降低糠醛的气化沸点，增大换热系统的传热温差，改善换热效果，更多地回收能量，达到节约能源的目的。     

高温润滑涂层设计的系统考虑

航天、航空、核能等尖端技术迫切要求使用耐高温润滑涂层，以保护金属构件的表面，增加发动机、推进器的工作效率和输出功率，８０年代国际摩擦学界根据工业和国防的需要将高温润滑涂层和耐磨材料定为摩擦学学科发展的重要研究方向之一。本文对高温润滑涂层设计中遇到的典型环境、涉及到的关键问题、未来发展的途径等问题作了阐述。     

RADIATION FIELD FROM A RECTANGULAR PLAQUE SOURCE FOR RADIATION PROCESSING

Evaluation of the Hubbell integral for an omnidirectional detector response to a rectangular plaque gamma emitting radiation source using a different numerical computation method on a personal computer was made. For a plaque consisting of several strip gamma emitters, exposure rates at different positions above the source were calculated using 'exact' evaluation and an approximate method. Optimization method is used to find source activity of each strip, so as to acquire desirable dose uniformity of the irradiated products. In uses of the Hubbell integral, by introducing appropriate programming, computation time can be saved.     

Morphology and structure of poly(p-phenylene terephthalamide) crystallized from dilute organic solution

The high-temperature crystallization of poly(p-phenylene terephthalamide) (PPTA) from dilute organic solutions was achieved through the introduction of a non-solvent, or precipitating agent, at the desired crystallization temperature. The morphology and crystal structure were examined for crystals produced from PPTA polymer with two different molecular weights (M_w = 46000 and 3430 g mol⁻¹), using transmission electron microscopy. For the high-molecular-weight polymer, ribbon-like crystals were produced, while the low-molecular-weight polymer yielded small needles or platelets. In both cases, electron diffraction showed that the Northolt allomorph was obtained. For the high-molecular-weight polymer, the molecular axes were parallel to the ribbon axes in a chain-extended type structure. A hypothesis for the orientation of the low-molecular-weight PPTA in the small platelets, is also given.     

复合功能原理方案特征建模及其求解过程研究

研制了驱动、传动和分离等典型功能原理方案解的知识库，建立了复合功能产品原理解的特征模型，提出了复合功能原理求解的通用进`生平注解和接口匹配并行的策略，进而提出原理解接口特征的嵌套结构及其匹配进程，开发了一个复合功能产品原理方案求解的计算机支持平台，进行了实例验证。     

降低氧化铝生产中熟料折合比的探讨

在氧化铝生产过程中，熟料折合比是烧结法一项重要的综合性指标，本文通过对熟料折合比的定义、计算公式的剖析，分析了生产过程中影响熟料折合比的主要因素，对有效降低熟料折合比的措施进行了探讨。     

Water-soluble copolymers: 22. Copolymers of acrylamide with 2-acrylamido-2-methylpropanedimethylammonium chloride: Aqueous solution properties of a polycation

The viscometric, turbidimetric and potentiometric properties of copolymers of acrylamide (AM) with 2-acrylamido-2-methylpropanedimethylammonium chloride (AMPDAC) were studied in aqueous solutions. The AMPDAC polymers exhibit poor salt tolerance and large, negative viscosity/temperature coefficients. Furthermore, the polymers were found to be sensitive to changes in pH. The AMPDAC polymers undergo phase separation in the presence of dianions as a function of temperature and AMPDAC composition.     

Preparation of ultra-fine copper powder and its lead-free conductive thick film

In this paper, non-agglomerated monodispersed ultra-fine copper metallic powders have been synthesized with chemical reduction method. Fine lead-free glass powders were also prepared by solid synthesis process. Thick film paste prepared by above-mentioned copper metallic powders and lead-free glass powders was applied as conductive paste of MLCC. Mixture of glass and zinc oxide give the thick film a high adhesion strength which is attributed to the rough interface from interfacial reaction between glass and chip, and a good densification. Diffusion of metal between copper thick film and nickel thick film is clear. Ni-Cu solid solution appears under high temperature firing.     

外转子电机关键技术及解决措施

对外转子电机的关键技术和主要工艺问题进行了探讨分析，并提出了解决措施。