云母钛珠光颜料的研究

综述了云母钛珠光颜料的发展概况，介绍了它的三种类型：银白色型、虹彩型、着色型，着重论述了它的生产工艺和制备方法(气相包覆法和液相沉积法)，并比较了各类方法的优缺点，分析了它的晶型类别(板钛型、锐钛型、金红石型)、包膜的复合机理和虹彩效应形成的原因，并指出国内产品的发展方向。     

离子交换增强玻璃表面化学稳定性的研究

系统研究了化学钢化及盐溶液后处理对Na2O-CaO-SiO2玻璃表面化学稳定性的影响。详细考察了用熔融KNO3化学钢化的玻璃以及用适当盐溶液后处理的化学钢化玻璃,在受水侵蚀后R2O的沥滤量和失重以及受碱侵蚀后SiO2的溶出量和失重。结果表明,用熔融KNO3对玻璃进行钢化处理后,玻璃的耐水性和耐碱性均有明显下降。而将化学钢化的玻璃利用适当盐溶液处理后,可以改善钢化玻璃的化学稳定性,因而可以进一步提高化学钢化玻璃的使用性能和拓展其使用范围。     

蒸发器结晶垢螺旋纽带自动清洗技术研究

概要地叙述了蒸发器结晶垢的螺旋纽带自动清洗技术的结构原理,直接利用蒸发溶液的循环流动能带动加热管内的螺旋纽带旋转清洗。根据结晶动力学原理,对碳钢管Φ25×2.5×1820内Na2SO4、KCIO3的冷却过饱和溶液的结晶盐垢进行流体动力学模拟试验研究。结果表明,能够满足一般生产蒸发器的自动清洗要求,达到长期连续生产的目的,并且设备成本费用低,具有显著的技术经济优势,可以在制糖、制盐、烧碱、化工、食品、制药等工业生产部门广泛应用。     

Catalytic activities and properties of mesoporous sulfated Al2O3–ZrO2

Mesoporous sulfated Al₂O₃–ZrO₂ (MSAZ) catalysts with large surface areas and pore volumes after calcination at high temperature (650 °C) and with higher Al₂O₃ content than 20wt% were successfully prepared from a template of block copolymer (P84). The MSAZ catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption, transmission electron microscopy (TEM), ²⁷Al magic-angle spinning nuclear magnetic resonance (MAS NMR), thermogravimetric analysis (TG–DTG), temperature-programmed desorption of ammonia (NH₃-TPD) and infrared spectra (IR) of adsorbed pyridine. It is shown that the resulting mesostructured sulfated Al₂O₃–ZrO₂ samples have a well-developed textural mesoporosity. The number of acid sites present on MSAZ catalysts is higher than that on conventional sulfated zirconia, and the former catalysts are more active than the latter one for various acid-catalyzed reactions.     

成品油调和建模及优化方法研究

炼油企业生产调度的优化因能提高资源利用效率、增加生产收率、满足需求和最大化利润而成为近年来的研究热点。本文以生产调度中的油品调和为例,分析和描述了调度过程建模所需的模型元素及其数学表达,其中涉及炼油企业典型的物料平衡及物性计算方法。针对生产操作规则对汽油和柴油的调和分别进行建模,求得在经济效益最大时各调和组分的质量以及主要性能指标,由此提出了一种针对成品油调和的优化方法。     

结晶梯恩梯生产工艺的研究

讨论了结晶梯恩梯的制造工艺、六硝基芪用量、络合物的形成与稳定性，以及六硝基芪质量等影响结晶梯恩梯质量的因素。     

Effect of molecular weight on two smectic polyesters

The liquid crystalline transitions of two kinds of smectic polyesters with different molecular weights were investigated by DSC, polarized microscopy and X-ray diffraction. The molecular weight affects the transitions significantly for these two kinds of polyesters. With a high enough molecular weight, both poly (pentamethylenep,p-bibenzoate) and poly(hexamethylenep,p-bibenzoate) exhibit an enantiotropic smectic phase, but the two endothermic transition peaks of the DSC heating curve seem to overlap. The polyesters tend to exhibit a monotropic smectic phase as the molecular weight decreases. From the DSC cooling curve, the isotropic-smectic transition can be seen more clearly. As the molecular weight decreases, the smectic order decrease significantly. The molecular weight affects the transitions in a different way for these two different kinds of polyesters.     

用闪锌矿(方铅矿)精矿催化还原软锰矿(大洋锰结核矿)制取硫酸锰

在稀硫酸(或稀盐酸)溶液中，用闪锌矿(或方铅矿)精矿作还原剂，用可溶性铁盐作催化剂，分解软锰矿(或大洋锰结核矿)，同时制取锰盐和锌盐。该工艺具有反应快速、彻底，工艺流程简单等特点，同时省去了软锰矿的还原焙烧和锌(铅)精矿的氧化焙烧，能够大幅度提高锰、锌(铅)矿的浸出率，对原料矿的品级没有严格要求。     

SiC晶须对Si3N4陶瓷基复合材料机械强度的影响

制备了含10vol％,20vol％及30vol％SiC晶须的Si_3N_4基复合材料,对其室温及高温机械强度的测试研究表明,SiC晶须对基体的高温机械性能有明显的增强作用。含20vol％SiC晶须的复合材料1200℃下强度达780MPa,比基体材料提高50％。通过SEM和TEM研究,讨论了SiC晶须增强的原因。     

Side-chain functionalized liquid crystalline polymers and blends, 10: phase behavior and structure of side-chain liquid crystalline ionomers containing ions of d-metals

Novel side-chain liquid crystalline (LC) ionomers containing d-metals Co(II) and Ni(II) were synthesized and characterized. Both families of the ionomers are characterized by the same influence of charged group content in polymer on their phase behavior. The incorporation of 2-3 mol% of metal ions in the nematic polymer matrix leads to the induction of SmA phase and rise in the clearing point. The peculiarity of their phase behavior in comparison with the earlier investigated LC ionomers with alkaline or alkali-earth metals is the full destruction of the mesophase at the concentration of d-metal higher than 12 mol%. This phenomenon was associated with the well-known ability of the transition metal ions to form various complexes that, in the case of LC ionomers, can negatively influence the ordering of the side mesogenic groups. The proposed structure of the LC ionomers is discussed in comparison with the metallomesogenic polymer systems.